Day 42, everything is chuggin along pretty healthy. Definitely some seeds in most of them which bugs me. The whole tent reeks tho which is nice. Some of the citradellics look like they are gettin pretty close so I'll start keeping an eye on them. I had to take the pics again and was strugglin so they arent my best. I have to go thru them still so I got the video up and tmm or as soon as possible I'll get the still shots up✌️ This one is a beaut, thought it may have avoided the pollen but pretty sure I saw a seed in a pic. I want to grow it again just to see if the purple leaves are genetic or related to the nutrients since they started turning right around when I started the green buzz line and was trying to dial in ppm and ratios.

This week I've been pulling the top fan leaves to stop the plant growing taller and to allow the side branches to catch up. I also started feeding them. I will probably repot and switch to flower next week now they've all outgrown their mutations.

Super tight nodes, been growing great!

Thanks for tuning in. The harvest was great and the bud smoked very nice. It served me well for more than a month. Shark widow being one of the closest strains to being a pure indica was satisfying and couch locking at the same time. I'll definitely miss smoking this strain and even more growing it. I grew a shark widow prior to this one, it was Infact my first grow. It hold up well and grow easy.

This one was a monster of plant she took the 140x70 cm like a real champ. Sexy frosty dense buds with a beautiful blue/Grey shadow This one can really be the champ of this season 💚

This week since Monday most of the pistils (little hairs) have turned from white to brown and orange. I continue to remove leaves that are obstructing the flowers. When I look through the magnifying glass the trichomes are some 60% clear, 40% cloudy, 0% amber. The goal is to harvest with these values in the trichomes: 0% clear 90% cloudy 10% amber

Cosa ne pensi ?

On the final stretch. Bug issues seem to be under control. All plants were flushed last week. This lady had 9l of dechlorinated water @6.8 pass through her. Checked pH in the run off and was spot on. All the buds are very dense. The way I have trained her has meant rather the some tall colas I have lots of smaller along the same branch as I kept the canopy wide and flat. I can't believe it's been this long! I started this grow after seeing @silky_smooth doing amazing art. So I decided to main line and train 16 colas.. second grow and probably way too ambitious. I have learned so much from her taking 4 clones and finding my way with my nutes. I hope I have not failed her or the great genetics Barney's Farm have produced. I had a vision of what I wanted her to look like and I feel I got what I set out for. Lessons learned. Slow down on nutes. Less is more sometimes! Plastic pots suck ass... At least 25l ones do. If I ever grow in this pot again I will amend my substrate as the drainage seemed way off with just biobizz light mix. Lights... 100% on the dimmer is not always best..(thanks @Mrs_Larimar) Bugs... They are bastards and I will start to feed nematodes into my final pot each grow from now on. And lots more.... We will keep her on water for the rest of this week then I will leave her to what's left for the last week. Thanks for looking if you managed to read this far thanks. Stay safe😷😷 Happy grows🌿🌱🌿

On day 1 I changed out my reservoir, and added my bloom nutes, adjusted my light schedule to 12/12 and defoliated the plants. I adjusted the reservoirs PH to 6.1 My hope is that by flipping this cultivar earlier than my last run, I will not run out of vertical space ;). On day 2 I adjusted my reservoirs PH down to 6.1. On day 3 the clawing is almost completely gone. I adjusted the reservoirs PH down to 6.1. On day 4 the reservoir's PH is at 6.1. I defoliated the plants removing anything blocking lower growth to increase light and air penetration of my mains. On day 5 the reservoirs PH is 6.1. On day 6 I adjusted the PH of the reservoir up from 6.0 to 6.3. I will let the PH drift between 6.1-6.3. on day 7 the reservoirs PH is 6.2. I lowered the light intensity from 100% to 85% to give the top of my plant canopy an average PPFD of 700-1000. I plan to reduce the intensity as the plants continue to stretch to keep them in the 800-1000 PPFD range. I just got my first quantum par sensor and I'm really loving the new data it gives me to optimize my lighting.

So i had to take all my plants inside because i found bud rot on 2 of them & the weather wasn’t going to get any better, had to transform my bedroom into a grow room😂 & i have 2 more plants which i am going to finish next to a window.. The smaller plant to the right is a Northern light by zamnesiaseeds that has a seperate diary if you are interested! I really hope the bud rot doesn’t spread anymore & if anyone has any tips or tricks for that they are always welcome!

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Song of the week : Eminem - Fall ------- Day 87 - Back for another week🤘 , that grow seems to be endless ⏲️ but you can put it in me as I am on a Nitrogen excess since... a lot of time. But the lady is good , buds are packing and smelling really nice : a mix of Guyana/pineapple/bubble gum 😍😍😍. Contrary to the leaves the buds are clear green , did not check the trichomes yet but I can see many but not that much , I would like her to be just a bit more frosty. Yesterday she get a 1.80 Ec feeding with 6.4 PH and no runoff, feed with megacrop+calcium (once again I'am not doing what I said last week 😅). -------- Day 88 - Water with clear rain water with EC 0.03 ph 6.3 and the runoff was 1.98EC and 5.8Ph. Next watering will be water + calcium to low the nutrients amont of the coco and to prepare the plant to a low N feeding for the next weeks. I will only use GHE rippen the last weeks then flushing. Today I check the trichomes and they are all milky (90% at least) so I hope they will soon become amber. -------- Day 90 - I just water her with clear water yesterday as she started to burn a bit due to the high EC in the medium. Couples flush should get rid of it but it means that I'll go light on the next feedings. She's also packing beautiful nugs, last week was a good fattening one ! She' still Dark green but the buds are clear. And the most important thing : She's out since a week now -------- Day 91 - Last day of the week and an ultra hot day with 31/32 °C outside 😲. Clear water today , Runoff 6.3 PH & 0.70 Ec. Next week will be the full PK one

No major problems this week, plants growing extremely well, the nutrient burning problem that I was seeing in the previous weeks disappear, reducing the concentration of nutrients worked great LST and defoliation this week. On day 49 the extraction fan was off for around 10 hours, fortunately no major problems came out of this. DAY 46 - Nutes PH - 6.08 Solution Temp - 19 PPM-1380 Watering Volume per plant - 4L DAY 49 - Water PH - 6.07 Solution Temp - 18 PPM-574 Watering Volume per plant - 4L

Entlaubt...weiter gehts...sonst nix neues...wachsen geschmeidig🙏👍👍

🍃🌱🐛🌞🤭

Hi all, Another amazing week passed by and RUNTZ from Zamnesia is starting to look like a real winner. So cool how well she is expanding and how well she takes LST. You can see we going to have a big bush when finished with hopefully a lot off very big coals. If no any serious problems get in our way hopefully I am looking to have her in flower by end off this month. Happy Growing