Likes
2
Share
@Amboss
Follow
Making some bubble hash and Show you the results
Likes
70
Share
They are doing good, flipping into flower next week. They love the new light. It’s been a little too hot since adding in new light. 30-31 degrees during peak heat - thinking about getting an ac machine next week
Processing
Likes
9
Share
She is a strong and resinous plant. I am seeing some kind of deficiency but I'm too far into flower to care about fixing it. Same thing happened to my last bluetoof. Same nutrient mix as the toof decay and that plant looks great. She smells sweet :)
Likes
4
Share
9/4/24 she's starting to perk up and look happier than she was. hopefully will revert back to vegetative fully soon. 9/7 shes one bushy fn plant 9/8 i topped the taller main in an attempt to keep her canopy more even leveled. Shes so bushy its like ivy wrapping around the trunk of the tree but the ivy is just the leaves and nodes exploding
Likes
29
Share
@mrb11
Follow
Had a few mishaps this week with my light schedule. Working nights now so I was not home when the lights were on and it was screwing up everything so I bumped the lights up and hour every night till it was turning on at midnight which is when I get off of work now. Well during that process a few things happened. My ac infinity controller 69 pro had lost wifi so I had been needing to do a reset because it’s still throwing an alert but I don’t use alerts so something’s wrong anyway I unplugged it during lights out and during the process of plugging it back in or something the lights decided to come on for a few seconds I believe is all it was so no worries it’s only once. Well that reset didn’t work so CS told me how to do it another way and I was able to do the reset but it didn’t work and I can’t remember exactly how it happened but later on the afternoon when the lights supposed to be off I realized I had the on for 23 hours 59 minutes and 59 sec lmao oops. So I went over 12hr by 2 hours so I just changed the schedule to give her 12hrs of dark then went back to my normal schedule but she only get 10 hrs of light that day. That was like a 2 or 3 day span of screwing up and I think I had another blip of the light turning on during dark period but can’t remember, trying to put that behind me and hope I didn’t stress her too much. She has been doing well besides that drama. Her ph has been crashing down to 5.5 fairly quick lately but I been on top of it. Got my auto top off setup I’ll see if I can add a pic, very simple gravity feed. I’ve noticed I’m pushing my limits on ppm, seeing some slight tip burn. Oh yeah bumped the light up to 7. Now on 7 of 10 which according to my new meter is not as bright as i expected
Processing
Likes
4
Share
@Ferenc
Follow
Week 10: 20/4 light schedule, 150 mp water per plant 2x, no fertilization anymore. Day 65: Next week Tueasday/beggining week 11/ we need to harvest because they will come from the council to check the house😂 Well, the previous one finished in 69 days, but I think they won't be properly ready by next week. I tried it and made me high anyways. I would give at least 2 weeks more to be done. Tomorrow I will check the trichomes with magnifying glass. They are beautiful stinky girls. Flowers are getting thicker and pistils are getting brownish. Day 66: I checked the trichomes with magnifying glass and it will be ready by next Tuesday. 7 days left with this day. They are beautiful just check in the video (Day 66). Day 67: It is crazy the last 3 days was so hot here in London. Today was 38 degrees!!!!!! Poor plants even with ventilation it goes up to 30-31 degrees. Well, it is alright because direct ventilation goes on so they won't be cooked. 😓😛 Day 70: It is the last day when they receive water and they just get once and half of the daily intake. 2 days before harvest I will not water them. Harvest day is on Tuesday 30th of July when they are 72 days old. I have checked the trichomes all good they are matured nicely cloudy so now it is very strong. They are very stinky girls 😋 Day 71: No more water for them..... Tomorrow is harvest day!!!!!😋
Likes
3
Share
Likes
3
Share
@coolesrat
Follow
This week things are swelling quick great ! The purple is showing up more but still only trace amounts. The black has no signs of changing colour however I already know my pheno ain’t the one ☝️ . But the purple shows promise!! Slow at cloning and a higher mortality rate then the black amnesia haze. This one almost every single clone I made all root amazingly ! Highly recommend for its yields and ease in the grow room. You can really feed it high . Still unknown why the purp has curling leaves but from others grows I see it’s fairly common . I’m guessing it prefers a slightly more alkaline PH . I’ve been using citric acid to ph correct and every time I sway a little low like 6.4-6.2-5.9 the plants leaves curl slightly more. Most mixes are in the 6.8-6.5 range however.
Likes
14
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 ATTENTION GROWERS!!!! BEWARE OF A SCAM COMPANY.... GREEN BUZZ LIQUIDS WILL SAY THEY WILL SEND FREE FERTILIZER BUT THEY MAKE YOU PAY THE SHIPPING WITHOUT TELLING YOU AND THE AVERAGE SHIPPING PRICE IS $100. AND THEY WILL GET ANGRY AND RUDE. THEY TOLD ME TO SUCK IT UP AND BITE THE APPLE🤬🤬 AND THEY TELL ME THIS RUDE BS AFTER THEY TOLD ME I NEVER EVER HAVE TO BUY OR WORRY ABOUT FERTILIZER EVER AGAIN. THEY ARE A RUDE, LYING GARBAGE COMPANY 🗑️ POOR QUALITY NUTRIENTS WITH VERY POOR AND RUDE CUSTOMER SERVICE AND NOT WORTH THE PRICE FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
2
Share
Still don't know if it's a MALE or female? But I'm excited for my next year grow outside. The climate i live in I didn't think a weed would thrive outside but this one is. Praying it's a female so i can see how flowering stage handles the out doors. Our summer are mild and it gets chilly at night but it seem to be ok with the climate so next year I am going to plant at least 3 outside and see what happens
Processing
Likes
36
Share
@Island
Follow
After many weeks believing that I have mites in my cultivation, I start to believe that my real problem is my soil. Apparently my soil still has decomposing material and it has affected the leaves. Waiting the flowering goes and how will plant react of it. I hope it not serious thing. My leaves problem look like excess of nutrient in soil formulation. On this week I turn lights on. Now there will be 360W full power to flowering stage.
Likes
16
Share
@HAPPY91
Follow
Mars Hydro TS 3000 Dimensions: 25.3" x 22.8" x 2.7" Weight: 11.3lb Coverage: 4x4 feet Watts Consumed: ~450w Light Intensity: Up to 1150 uMol @ 18" height Spectrum: Full White + Infrared LED Brand: Unbranded LEDs Voltage: 120; 240; 277 Warranty: 3 Years Week 1 3/24/2021-3/30/2021: Day 1 3/24: Played Hip Hop Radio. 71.1-75.7 55%-74% Day 2 3/25: Played Hip Hop Radio. 75.6-78.6 45%-56% Day 3 3/26: Played Reggae Radio. 75.0-79.5 53%-60% Day 4 3/27: Played Hip Hop Radio. Mixed 2 ml Fish Brew to 1 gallon water=38 ppm 6.7 ph 68 f. only drank 0.25 gallons. 75.6-81.0 42%-55% Day 5 3/28: Played Eminem Radio. 66.0-80.1 48%-67% Day 6 3/29: Played Jimmy Hendrix Radio. 65.5-79.2 44%-77% Day 7 3/30: Played Cardi B Radio. Topped above third inter-node then defoliated all lower growth to focus on Main-Lining. Drank 0.25 gallons plain water=25 ppm 6.4 ph 69 f. 65.3-80.1 44%-77% Final Weekly Notes: So far so good no complains or worries. Very excited to have this amazing grow with such amazing products. Big thanks again to Coast Of Maine, Exotic Seed, Fish Brew, and Mars Hydro for this amazing experience. The Mars Hydro is very powerful I had to turn it down because I noticed a little light burn when I had it at 50% 24 inches away down 25% 24 inches away. Feel free to leave a like comment question or even give that follow button a tickle. I am always learning something new everyday. Thank you so much for stopping by and checking out my grows. Good luck stay safe happy growing cheers!!!!
Processing
Likes
36
Share
Hey everyone 🤗. Today they were planted in their 11 L pots 😀. Now the root growth can really accelerate. When repotting, a total of 3 g per liter of Green House Powder Feeding Bio Grow was added to the Canna Coco 😊. That's enough for 8-10 weeks :-). I'm curious what they are doing this week and I wish you all a lot of fun with the update :-). Stay healthy and let it grow 🌱🍀 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
144
Share
@roro_204
Follow
825 watts All healthy . Not much going on .
Likes
1
Share
@Cannerd
Follow
I'll be updating the comment with the daily log shortly, but figured I'd get the photos and weekly overview up. I started off this week with a topping at about the 4th node, leaving the larger fan leaves on for now. I then left then alone for a bit while I waited for the new branches at the nodes to grow out, rotating as needed. By the end of the week, they had all bushed back up with new foliage and growth. I also included photos pf the flowering mother plant to keep up with that sneak peak. She still wasn't showing signs of flowering, so I gave her an extra 24 hours of darkness to hopefully kick start the process. As I went to go shut unplug the light source, I noticed that there was a smaller light leak from one of the vent ports, so I also made sure to close that up. At the end of the week when she started to show signs of flowering, I defoliated her to help with light penetration, as she's got massive fan leaves. You'll see in the photos that I took that opportunity to decarb the trim as well. I'm sure there's little to no THC-A, but whatever other compounds are present should make for a nice addition to some butter later on down the road. I just won't factor it in when approximating the potency of the final product.
Likes
11
Share
23.09.23-85 дней этому растению . Она немного растянулась и я решил убрать пару больших листьев и немного подвязать , чтобы свет лучше проникал . На этой неделе я поднял ппм раствора до 1000 . Все девочки активно пьют и выглядят здоровыми . 26.09.23-88 день ) За эти 3 дня растение продолжило растяжку и прибавило около 8 см 😎😎 Шишки красиво формируются и на листьях уже виден Сахар . В планах на ближайшие дни провести легкую дефолиацию и добавить света . Всем мир 28.09.23- 60 дней вегетации и 30 дней цветения ! Растение продолжает медленную растяжку и прибавило 5 см за 2 дня , в остальном изменений нет . Завтра добавлю ей 120 w .