Day 127. Chop day !!! Think two weeks would be perfect for them to finish up, but 17 autos waiting in veg/dry room and I go for holidays, nobody will invest time like me, so simple watering left for Auto grow without training, my friend will cover this easy task for me. Happy Growing !!!

week intel: its time for second pruning they grew up too fast and need second pruning as below : first i remove big fan leaves and only leaves then let them rest for 1 day then the second part of pruning will get done that is removing branches based on these conditions: 1-if the branch is very low and never can make it to the top , 2- if branch is in shade even after pruning fan leaves , 3- if there are too many branches at the small space then non of them will get resources so if there is no space for branch then , they must get remove. everything is perfect! stresses : pruning big fan leaves and lower branches + a little E.C stress around 1.7 once a week feeding: i feed them 3 times this week with this order : day 1 : i feed them heavy with silicate +base nutrients(calcium & micros + Bloom) about 884 ppm - 1.7 e.c to cause a little stress. day 3 : i feed them low dose of Feeding Booster + Karbo Boost around 325 ppm - 0.6 e.c to let them recover a little but not fully recover still a little stress will caused. day 5 : i feed them with low dose of Top-Max + B-52 around 213 ppm - 0.4 e.c to let them recover the stresses to get ready for another stress next week. guide of the week : no more stresses from now on till the end and from next week i'll reduce the amount of nitrogen and calcium to below half to the end.

🙌12/12 to bloom.🙌 I changed the light cycle last week because I was tired of the vegetation phase. and a lil bit lazy w and upload - sorry! Some side shoots were removed, then I let them rest for a while (3 days) before switching to 12/12. I can still see the (N) surplus inside my substrate, this will NEVER EVER HAPPEN AGAIN💀 we'll see how this affects flowering 😎 Due to the inner substrate of cheap soil, which has a poor NPK value, I now perhaps have a construction site that can be worked on. The plants continue to look very good, except for the (N) surplus and a little (K) blockage which I can remedy this with some Epsom salts.

Está resinando bem nessa 4° semana, vamos pra cima! Dia 30 de novembro tá marcada a colheita!

Start of week 5. - She has not started flowering just yet but i expect her to bloom late in this week or early in the next. - Height=20 cm - Width=42cm 30/01-2024 - Day 29 - Watered 2l ( mixed 4ml of grow-bloom-top & calmag with 2l water) 01/02-2024 - Day 31 - She has started getting taller and have reached about 25 cm today. 03/02-2024 - Day 33 - Watered 1,5L (mixed 3ml of grow bloom top with 1.5 l water ) - Height= 28 cm - Width=45cm - 8 "floors"-16 side branches. Her stem and bottom branches look thick, able to carry water and nutrients to the future buds. Gotta love them thick fertile hips 😍 04/02-2024 - Day 34 - Pre-flower has sprung out all over the plant now and she looks like she just started flowering - i went through all her side branches gently bending the lower big leaves below the bud carrying branches, making sure no budcarrying branches would be held down by other branches. 05/02-2024 - Day 35 - Last day of the week. she has grown a couple of centimeters the past couple of days and have reached 31 cm height. She looks a little crispy on the tips so i might give her a light dosage og fertilizer tomorrow instead of the expected dosage.

Week 14 (1-5 to 7-5) 1-5 Temperature: 28.2 degrees (lights on) 22 degrees (lights off) Humidity: 62% (highest) 46% (lowest) No pictures. 2-5 Temperature: 29.2 degrees (lights on) 20 degrees (lights off) Humidity: 61% (highest) 48% (lowest) Removed the net, and tied down some branches to the pot with some gardening wire. This way i can easily remove the pots out of the tent to weigh them. I also moved the oscilating fan from underneath the canopy to above the canopy. This is because the leaves gets hotter as i increase the light's power output. The Gorilla Kush #2 and the Chemdog #2 are showing some heat stress. Installed a valve on the autopot from the Kush #2. This is because its weight is higher then the other pots. Before i watered them i weigh the pots. Dry weight: Gorilla Kush #1: 4.4 kg Gorilla Kush #2: 6.0 kg Added 10L to the reservoir. Opened the reservoir for a couple of minutes. 3-5 Temperature: 26.2 degrees (lights on) 19.9 degrees (lights off) Humidity: 61% (highest) 47% (lowest) No pictures. Increased the light's power output to 75% LUX: 16.000 / 20.000 4-5 Temperature: 26.9 degrees (lights on) 21.2 degrees (lights off) Humidity: 59% (highest) 41% (lowest) Opened the reservoir for a couple of minutes. 5-5 Temperature: 27.6 degrees (lights on) 21.2 degrees (lights off) Humidity: 60% (highest) 47% (lowest) No pictures. 6-5 Temperature: 27.6 degrees (lights on) 20.4 degrees (lights off) Humidity: 60% (highest) 42% (lowest) Dry weight: Gorilla Kush #1: 4.4 kg Gorilla Kush #2: 5.4 kg Added 10L to the reservoir, there was still 2850 ml left in the reservoir so now its almost 13L. Opened the reservoir for a couple of minutes. (Only Gorilla Kush #1) I also lowered the Gorilla Kush #2 a little bit, as she is showing some heat stress. The bud development of the #2 is very mediocre, some buds show some THC, and some buds have almost none on them. I am sure the yield will be low, so i will probably make some hash with the #2 7-5 Temperature: 27 degrees (lights on) 19.8 degrees (lights off) Humidity: 57% (highest) 44% (lowest

Love using Grow Diaries and the community of people I have met and chatted with along the way ❤️🇨🇦👊 I’ve “grown” so much over the past year from the advice and journals posted! Thanks Growmie’s! 👊❤️

Ultima semana de crecimiento para estas 5 nenas de royalqueen amnesia amg

✅💚🧑🏼‍🎤💦

_____________________ | ROYAL CHEESE HARVEST | |_____________________| Whats up!! Harvesting a little earlier than when i would like, because of the rise of bugs that appeared last days due to climate conditions... this year temperatures are oscillating more than usual having 1 rainy week, then a sunny hot one just after it rains.. In fact, last year, it did not rain until November So the plagues were on the leaves, mildew powdery(just a coulpe of leaves),aphids(like just in the leaves of one cola), and some caterpillars almost ready to get out and start eating all the buds, (hopefully i cut that day).. Sounds bad, but the parts of the plant affected was only the leaves... and means that a proper cleaning is coming so removed all the leaves and the result is what you can see, that bonsai.. Spotted 2 dead material points in big colas, that i removed after drying.. I did not weight the plant wet because of the smell that i had on my house that day, things went very tense, i was a bit busy, and even, it has not much sense to me, im better weighting the dry material. So at the end i think im having very good quality, and the affected parts are less than i thouth at first, so im very happy with the results.. On the scales are the best buds, the rest is the lower part of the colas that were less developed so im doing hash with that part.. Been busy guys so im uploading more photos today ^^ I hope you like all the grow thank you for follow it :) Song: Eazy-E - Down 2 tha last roach00000

A it late with the update as I broke my phone,. To say it was my 1st harvest was very pleased with the outcome, 38grams dry of mostly tight nugs, trichomes on the main colas were turning Amber so cut those down couple of days earlier and left lower nugs to develop a bit more. Cured for 2 weeks now and buds smelling and smoking great, smooth taste and full of flavour! Next crop been planted very soon.

Wk10 11/10/21: Day 64. 💧I have no idea what I should do. Should I chop it now, and use it to compare my next grow to, or wait another week and then chop? I think I'll let the pot dry out one more time, and then cut it down. Might as well have a baseline to go by. With plenty of cloudy trichomes, it's likely a good time to come down anyhow. Everyday I see more and more pistils dying back, but also a bunch of new hairs being pushed out, so it's confusing. I have a feeling that it's going to start foxtailing if I let it go much longer. Right now, buds are still very tight. If I do anything else before harvest, it will be a wet trim of most leaves. 11/11/21: Day 65. Pot is a bit lighter today, but not enough for me to say it's time. I've never been one to harvest just before the lights come on, and just chop it down whenever I felt like it, and had the time. I'm not sure if I will wait until early morning, or just go with what I've always done. I really don't feel like waking up at 4:30 and making a bunch of noise. I should really change my lighting schedule to make that easier, but I would be very unhappy if I couldn't check on, and take care of my plants during the morning and throughout the early afternoon. My thoughts on the plant came true. I opened the tent today, and saw some foxtails forming. Right now it's alright, as it's just a bit more bud to smoke, but if I left it to go for the entire rest of the week, it would definitely look like it had some lumps. So, that means it's time to wet trim, then chop down and hang it. Thankfully I have a small empty tent that I can use for drying. I have a fan in there still, so the air will be moving. Cannot wait to give this a test. 11/12/21: Day 66. 🌲Pot is definitely light enough to harvest today. As much as I'd like this to be my first dark harvest (chop 1 hour before light, or 5 hours after dark), I'll just stick with my usual plan and chop it down later, once I've taken care of a few other small things. I can see even more foxtails forming, and the old ones are now very prominent. I know there are several reasons for that to happen, with one being genetically predispositioned to growing them, but this is not likely the case. They are likely caused by my movent of the plant mich closer to the light, technically just a smidge too close. Oh well, I don't mind a few buds messed up, just as long as it's not the entire plant. Plant is now hanging inside the upstairs tent with a fan for air circulation. I will monitor it's weight loss every two days, and then jar and cure some remaining buds for approximately 4 weeks in my auto cure. It may not last that long, but I'm going to try. I will do my best to keep the main cola separate and intact for a future session. Chop: 88.1g or 3.11oz 11/14/21: Day 68. 35.5g or 1.14 oz 11/15/21: Day 68. Total dry: 20.7g. Bud is actually quite crumbly, so I'm sure once its brought back up to the 64% the Integra pack provides, it will have a better weight. Some smaller buds were smoked for testing, while a good portion is in the small auto cure, where it shall hopefully remain for the next 4 weeks. Updates will be provided once buds are cured for a true smoke report. End Diary As you can see, the plant did not finish on a desired colour. I do not mean a dark purple, but a high level of yellowing in the leaves. It started early in the flowering process, and continued to get worse. The plant however, persevered and finished strong. Even though the plant did not finish up looking like an ideal specimen, it allowed me to learn a lot about the genetics, and how to work with the dry amendments with this strain. Next round will be mich better, I guarantee. Don't believe me! Just watch! We will see it together.

Fast buds new originals lineup Sour Diesel auto is beginning its 4th week of flowering today Jan 4th 2020 The two plants are very different in both size shape and structure with plant number 1 being tall and lanky with big internodal spacing whilst Plant 2 is a squat bushy two headed monster 😂 They both have a citrus like smell . Fed only water this week just gone . Thanks for stopping by 👍