As week 8 started, buds are gaining size. Plant is drinking lots of water. About. 3/4 a gallon a day to day 1/2. Added a second light to setup now. Hoping to help the flowering buds with extra light. Relocated my fan to help circulate air flow around more of the taper colas. Should have a around 3 week a left til harvest. Can’t wait to see how this first grow turns out and what to learn from it overall at the end.

6.6.25. 5th week of flower looking better but well under performing. Nice purple everywhere but this is my smallest harvest ever and that sucks. Still going to finish this grow, but to be honest can’t wait to start next!

I finally harvested all of my photo plants. So my 2 auto plants are getting an outage for the rest of their lives I have moved them both into my larger tent with more light and more room. I’m sure 100%h sure why both of these plants are alot light green. I think it’s I got a little behind on the nutrients but the green is slowly comeing back. It’s been hot lately I have the lights running at night now

Tall, frosty, loud, fluffy, promising.

9/5: I hope to successfully germinate all 15 of the Fastbuds seeds that I bought along with the 2 freebie Blackberry beans I was given by the nice folks at Hipersemillas.com. I'm also germinating 4 x Sweet Seeds Dark Devils that will be managed in a separate diary. I am keeping it really simple this run and am using my new DWC cloner to germinate. I made up 3 gallons of a de-chlorinated water in a strong solution of Endoboost Hydro and added 1/4 tsp of Superthrive per gallon. I adjusted the Ph to 6.0 and let the pump and aerator cycle the res for a few hours. I put rapid rooters into 1.25" net pots and ensured that the water level was high enough so as to just touch the bottoms of the rooters. About 10 minutes later the rooters were all nice and damp, so I planted and prayed. I've just got a 9w pinkish grow light mounted about 5 inches above the rooters, but once they are rooted well, I'll move them into a 1020 tray with dome under 65w of mixed spectra lighting with supplemental blues. Once they've got a couple sets of leaves, I'll plant the rooters in some half-gallon biodegradable fabric bags and move them into my tiny tent under a pair of mixed spectrum QB's. They'll have to stay in there until my current run of photo clones is done in the closet. Once space opens up in the closet, I'll plant those biodegradable bags into 3 gallon pots and move them in. Hopefully in the next 2 weeks....🙏 9/7 (a.m.): Thus far, I've just got one each of Wedding Cheesecake, Strawberry Pie, and Lemon Pie emerging... 9/9: All but one Lemon Pie are up and growing. The problem child may yet fully emerge..her cotyledons are opening up, but they're just below the surface. I caught some rainwater today and pre-watered all the 1/2 gallon degradable fabric starter pots with it. My photo clones still have a couple weeks left, so the timing should be right for me to move these seedlings into the tiny tent in a few days and plant them in the starter pots...and 12-15 days later I'll plant the starter pots into some new 3 gallon fabric pots I've already got filled and waiting. This batch of soil I'll be using has been cooking since late March, and the rhizosphere is fully rocking. I also treated all my soil this summer with Beauveria Bassiana, Metarhizium Anisopliae, and Azamax to ensure I have no pestilence to deal with, so I'm optimistic that this will be a successful grow.😁 9/0: I planted up all but one Lemon Pie in 1/2 gallon degradable pots and moved them into the tiny tent under 240w of mixed spectra quantum boards.

💩Holy Crap We Are Back At It And Loving It💩 Growmies we are at DAY 42 and she's just killing💀it👌 👉Added straws within the Tiny pot to help watering in week 4 👈 So I'm starting to see she needs watering every single day and now need nutrients 🙃 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

You gnat to do what you gnat to do.

**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8

Start of week 5

Hello Growmies, The first week of flowering has wrapped up, and I'm pleased to report that she's stretched evenly through the ScrOG. I've been doing some light defoliation where leaves were overshadowing other shoots. She's showing a clear preference for a pH below 6. Anytime it creeps above that, the plant begins to experience nutrient lockout. I'm keeping a close eye on this and will adjust the pH as necessary. Her root system is expanding robustly, gearing up for increased growth above ground. To support this, I've upped the dosage of Orca along with the boost accelerator. Here's a bonus for you all: enter the code ZAMMIGD2023 at checkout in Zamnesia's online store for a 20% discount. Thanks for stopping by, and stay tuned for more updates next week!

The Diary would NOT let me add all the weeks to Harvest Separate, sooo,, Harvest upload has 3 ish Weeks , N The Smoke will have the last week and Harvest

😁🍀👨‍🌾🏻👍✌️💚

Hey growmies, it's the fourth week of vegetation for the HighCloudz and boy is it growing 👌 The fanleafs are really big, bigger than my hand! The plant is doing well on the Plagron feeding and looks very healthy. As the plant grows fast already I'm thinking about switching to 12/12 before the end of the week. I don't have that much vertical space in my growbox and this lady will probably stretch due to it's Sativa genetics. To prepare the branches for the ScrOG I started to bend them outwards. My goal is to get a nice and even canopy once she starts blooming. Stay tuned for more pics and updates later this week 😊 🌿🌿🌿 Mid-week update Even though the big fanleafs were cool, they blocked the light to the lower branches. I removed the biggest fanleafs and did some more LST for the upper branches, bending them outwards and to the side so they will hopefully have a good spot in the ScrOG net. The pant looks a bit run down after the defoliation and Cannabis bondage, but hey, she still has many weeks to go and I'm confident she will be a beauty once again :)

9/18: New week...fed with Boomerang and Kangaroots 9/19: Applied Axiom harpin proteins and boomboom spray 9/20: Fed full strength TPS One...decent growth. The smaller one is less droopy now. 9/21: Tucked a few leaves and took some photos and a video. Looking good. Just a couple more days of 24/0... 9/22: Switched out the 560w of 5000k CCT lighting for 720w of 3000k CCT lighting and set the timer for 12/12. Decided against 13/11 with emerson effect...trying to save a few bucks on electricity. I'm keeping the lights at 30" from the tops for a day or two. 9/23: The girls loved their first night of sleep...so perky!

Another record for veg time thanks to the solar lights...there was a lot of rain this week but she is surviving. I am looking forward to switching her to flower anytime soon.

Welcome to the next week of great adventure with young gorillas. The beginning of the week I started with a small flush with tap water at pH 6.3. I intend to change the 150W HPS lamp to brand new 250w plantstar this week. In next few days gonna use pk 13/14 One love for everyone 🌱🐒🌱🐒🌱🐒 P.S: mobile application is terrible, it is very difficult to update something, it always gets stuck during the upload of photo, no upload percentage. Already twice made me mess up the whole week EDIT: Additional HPS mounted 250w plantastar. Unfortunately, after purchasing the wattmeter, I discovered that my LED consumes only 220w of guaranteed 350w. I'm thinking about giving it back for a guarantee. The current energy consumption of the entire project is 810w / h

Just a little LST every day and the canopy is nice and even with plenty of future bud sites.