Start of week 5 flower.

week 3 of flower looks like they are hungry. Last week I Lolly popped the bottom 1/3 of the plants for air flow and to push the energy to the tops. I have a theory that the potassium is low in the media due to flowering I was going to wait till the 4th week of flower to give them a topdressing. but I think I will mix some PK booster in the next watering and fertigate the pots from the top, so the plants have immediate access to the PK for flowering. let me know what you think after watching the video image section. take care for now,

So, the nutrient lock is fixed, the humidity is under control, and these ladies are looking super vigorous. We will flip very soon as the stretch will fill out any holes in the SCROG net. We will also clear the bottom of these plants in the next day or 2, taking lots of clones and making sure we have that SOG. We have introduced some workers, 10 praying mantis to keep an eye on any pests.. the video of the mantis is from another grow, not the OG kush Light is about 70% ATM and i will turn up to 80% today, Spiderfarmer have kindly sponsored us with a Light controller, that arrives imminently and as soon as it does, it's week 1 of flowering and the light will go to 80% - then 90, then 100.... We have had serious rain here, the relative humidity outside is 90% and the temp is 31 degrees. We continue to feed with our own nutrient schedule. Slightly increasing the nitrogen for the last week or som of pure Veg. Thoughts? Lets Gromore,

Small harvest but was due to the over feed of CAL-MAG I had quite early on but still pulled through and flowered almost and OZ. Really nice Sativa from Barneys Farm.

Kalini Asia Week 13 11L Pot LED: SP250 (245W) for Flow. Stage Canna COCO Mineral Nutrients: 👇 Sensi Cal-Mag Xtra: 1 ml/L Power House Part A: 1.5 ml/L Calcium Plus Part B: 1.5 ml/L Stimulus: 1.5 ml/L Bud Explosion: 1.5 ml/L

11/09/2025 - Day 131 Removing a lot a buds with mold. If it keep getting worse I just end it here. Smell is really strong, this scares me a little. Stems are bending under the weight of the buds, they will break for sure in case of strong rain. The small third one died for reasons, not a big deal.

Oh my goodness! I had a 12 hour harvest session and I am so burnt out x.x I might have a few weeks before I germinate again haha I had so dang much to harvest it was getting concerning. I had to use the trellis net in the tent. I have It nicely controlled using the exhaust fan and the humidifier to keep it between 0.7-0.9 kPa I also have two Ac units running to fight the summer heat and keep it as cold as possible! Those were the fattest and most prime buds. The B-grade heads were thrown in a paper bag amd into the fridge for an old school lotus inspired dry. And finally everything lower down that wasn't an apex bud and also the apex buds that were small were put into 8 Ziplock bags and thrown in the freezer. Fresh frozen bubble hash is in my future! I still need to aquire a rainbarrel spigot and two food grade buckets but I've got most everything else. The B grade buds will be either given away or made into more bubble hash because i am estimating about a pound of top-shelf flower and a pound for everything else. I've always disliked the hanging net drying racks but maybe I'll look into for the B-grade heads next time. This has been the longest cycle I have ever done and geez it's probably the biggest. I really hope it's the most enjoyable smoke! I'm locked in on the drying/curing process hoping to finally get something that can beat the dispenserary stuff. I am so excited! My next cycle plan is to do a rotating perpetual harvest every 3 weeks in the four 40 gallon containers using the last of my Strawberry gorilla and Gorilla Cookies from FastBuds. These plants and genetics far surpassed my expectations so far, I'll be back to update soon and I'll get a weight from each of the Top and Mid buds as well as the bubble hash yield. The bubble hash will be using Bubblebagdude 5 gallon zippered mesh bag, their 5 pack of 20-220 micron and some hand style agitation. It will be my first try! Thanks for reading, and please take care of yourself! No one can take care of you, like you can take care of yourself.

4-5-2021 Trace elements fix. i think everything is stable about 2/3 plants had some micro nutrition deficiency so i think tomorrow im gonna turn the watts from 280watt to 350watt , and some light defoliation max 5% Fun to grow : i just love her , Amazing plant she grows very well and easy, just 2 see her explode from week 4 till now is very impressive😱 growing in height stopt because i can see she putting some weight on her beautiful tops of enjoy.. Recommend: Duux whisper-flex-smart : https://duux.com/product/whisper-flex-smart-white-battery-pack/ EXTREMELY quiet and smart and that is exactly what i like! extremely quiet is no extradition, the quiets ventilator i ever experience for sure! You can operate the ventilator with a app and change 26 speed setting also natural wind and damn moving up and down from left to right and in-between! amazing how quit she is so fucking handy for the stealth growers who need a little help, also there is a option for a accu so 12 hours without power is no problem!also the freedom moving without a power cord... i just fucking love it! yes 200 euro is not a small price but for the longterm it is i think. 7-5-2021 Defoliation , around 20% also new batch of 10MIL nematodes, the population of fungus gnats is very small now so almost gone i hope this cycle will kill them all , the hydrorocks helps 4sure alittle bit also for the nematodes its great, no direct light 7-5-2021 3e Run on this reused coco , i bought it in 2018... it's my best run till now so that is interesting, yes i clean it (dead roots etc) and mix the lost coco amount with fresh coco , PH test it and EC , canna flush and i always use enzymes! Next run i buy a clean new batch and mix in with vermiculite Again some defoliation 10% today , cleaning the room and take care of the high humidity 75% is too high so i installed the dehumidifier also a DUUX , i DIY a carbon hepa filter with the exact diameter . they use it for air-purifier so that is nice,, i have a active 3way filter circle , 2 are active and both growtents have a passive intake filter its handy for so many reasons but flying Spoors is 1good reasons 8-5-2021 Bought https://www.migrolight.com/product/migro-uvb-310/ UVB /UVA fixture for the last weeks pf flower i hope its on time , interesting selftestproject Also i cleaned the under side of the cannopy and i added a extra fan fpr good airflow

It survived the holiday! Roots and plant looking healthy 👍 I Topped it as soon as I came back and plan to start LST when the branches start to stretch.

Cheese die Expert Seeds e pronta per il raccolto e aggiorno domani il diario

✌️🎃 Thank you for checking my cultivation. 🌱✨ She looks better.

Half way through week 2 flower the girls look smell great today I pick about 150 leaves off my 9 plants didn’t touch the other 6 but that’s the last time I’ll be picking any leaves now I’ll be leaving the girls to just flourish and be happy I cleared a lot of the bottom as well watched a few vids about bugs and got para so I did a lot off sorting the bottom of the plant witch you’ll see in the pics .. what can I say it’s my 2nd grow and my plants are looking better then most off my mates mine are just looking fresh smell nice asf and there leaves are a perfect green. Couldn’t be happier and it looks like I’m gonna get abit off them 9 that’s in my trellis net Subscribers YouTube channel Uk grower blueboy Ps the pics are the 6 that haven’t been trained they’ve just been little personal project for me There well jue a feed it’s bin really hard getting hold off Water I’m just going to go out tomorrow and buy 100 bottles if the shops let me.... there gonna love there watering tomorrow.

Week almost coming to an end, I decided to update a few days before as this week should be very busy... Everything is going very well so far, nothing to correct, looking forward to the next few weeks 💪💪💪 I decided to automate my irrigation, which was the only thing I still had to do manually, humidifier, dehumidifier, air conditioning were all automated and all that was left was watering. Using automotive equipment, I assembled a fuel pump, a cold start solenoid, a smart extension from China, some hoses, connectors and an aquarium air compressor to make bubbles every hour for 20 minutes, and finally the drippers, which are also low cost. 💲💲💲 I posted the video of the whole scheme working and also the oxygenator, I don't know if anyone doesn't want to invest in a high-cost one and also likes to do these things, that's a great idea... If you have any questions or want to do the same you can ask me in chat, it's very simple... Good farming to everyone 🌱🌱🌱

Well today I am exactly 2 weeks from germination I know they seem abit small compared to other people's. But up to now all good. repoted to solo cups will probably stay in them for 2 more weeks then repot again.