Getting there... cant wait for Spring Walls are up and painted, floor is laid, electrical all done, exhaust outlets mounted. Ive started to install the trim - I decided to put a grey stain instead of boring paint on the floor trim boards. Looks really solid against the dark bamboo floors. I used two gallons and two coats of flat pure white paint for walls and ceiling. Should give me a reflectivity somewhere around 80%. Some may ask why not opt for mylar? I just dont like the look. I dont care too much for reflectivity, as I will be well above the required watts/sqft with the light setup I will be using. I mounted an electrical receptacle in the ceiling, I thought it may come in handy for cord management. Im going to mount the 3 x meanwell drivers outside of the grow room and run some extra long cables to them. This is to keep heat out of the room, any little bit helps. Will be running a 8inch fan with about 750 CFM in order to properly vent the room. Intake will be a door vent and the negative pressure the fan provides. Odor is not too much of a concern, but may as well add a carbon filter. Tables to be built this week after trim is installed Week 1 Spend - $2080 Week 2 Spend - $350 (mostly on hardware store visits) Total so far - $2430

Getting there... cant wait for Spring Walls are up and painted, floor is laid, electrical all done, exhaust outlets mounted. Ive started to install the trim - I decided to put a grey stain instead of boring paint on the floor trim boards. Looks really solid against the dark bamboo floors. I used two gallons and two coats of flat pure white paint for walls and ceiling. Should give me a reflectivity somewhere around 80%. Some may ask why not opt for mylar? I just dont like the look. I dont care too much for reflectivity, as I will be well above the required watts/sqft with the light setup I will be using. I mounted an electrical receptacle in the ceiling, I thought it may come in handy for cord management. Im going to mount the 3 x meanwell drivers outside of the grow room and run some extra long cables to them. This is to keep heat out of the room, any little bit helps. Will be running a 8inch fan with about 750 CFM in order to properly vent the room. Intake will be a door vent and the negative pressure the fan provides. Odor is not too much of a concern, but may as well add a carbon filter. Tables to be built this week after trim is installed Week 1 Spend - $2080 Week 2 Spend - $350 (mostly on hardware store visits) Total so far - $2430

Getting there... cant wait for Spring Walls are up and painted, floor is laid, electrical all done, exhaust outlets mounted. Ive started to install the trim - I decided to put a grey stain instead of boring paint on the floor trim boards. Looks really solid against the dark bamboo floors. I used two gallons and two coats of flat pure white paint for walls and ceiling. Should give me a reflectivity somewhere around 80%. Some may ask why not opt for mylar? I just dont like the look. I dont care too much for reflectivity, as I will be well above the required watts/sqft with the light setup I will be using. I mounted an electrical receptacle in the ceiling, I thought it may come in handy for cord management. Im going to mount the 3 x meanwell drivers outside of the grow room and run some extra long cables to them. This is to keep heat out of the room, any little bit helps. Will be running a 8inch fan with about 750 CFM in order to properly vent the room. Intake will be a door vent and the negative pressure the fan provides. Odor is not too much of a concern, but may as well add a carbon filter. Tables to be built this week after trim is installed Week 1 Spend - $2080 Week 2 Spend - $350 (mostly on hardware store visits) Total so far - $2430

End of week 9 flush week, cut the blueberry ladies and put them in the mesh drying rack. Will update in 2 weeks with first smoke and dry weight, assuming she's dry in 2 weeks. Flush week for the Super Lemon Haze, she'll get chopped this coming Sunday.

End of week 9 flush week, cut the blueberry ladies and put them in the mesh drying rack. Will update in 2 weeks with first smoke and dry weight, assuming she's dry in 2 weeks. Flush week for the Super Lemon Haze, she'll get chopped this coming Sunday.

This week I cleaned the plant a little late, but it was necessary for the excess of leaves and buds that would not develop. The positive side is that the plant is in full force in its buds, more pistils turned orange and the smell got a lot stronger, the aroma is wonderful !!😍

Boa safra muito feliz e ancioso......

End of week 9 flush week, cut the blueberry ladies and put them in the mesh drying rack. Will update in 2 weeks with first smoke and dry weight, assuming she's dry in 2 weeks. Flush week for the Super Lemon Haze, she'll get chopped this coming Sunday.

Week 7 went well! Took a few more bottom leaves because it was getting quite crowded and they were making it harder to find spots around the rim to bind her to for LST, and they were getting mashed when I had to pick her up anyway. Lots of benign neglect this week... Haven't fed her very heavily or done much other than let her do her thing. Thinking another week or so in veg. Maybe 2. Have to try to time it so my schedule will be open when she finishes so I don't feel tempted to rush again.

Cut out all the nitrogen from the Biogrow and Algamic nutes, the plants are well into the late stages of flower, expecting to be flushing later this the week, leaves are yellowing as the plants get to the end of their life, however the buds are getting to be a respectable size. I couldn't resist and had a pre-harvest taster, cut some of her bottom bud, dried and decarboxylated them in the oven, toked in my new 8" bong. Needless to say i was very happy with the results. Pleased with this strain alot so far. 12 /12 Administered the ladies a Molasses flush. 1 tsp Molasses, 8 ltrs filtered water, 2 ltrs per plant.

66g - Candy Cane [F2]  (top section)  75g - Candy Cane [F2]  (top section) 98g - Candy Cane [F2] 107g - Candy Cane [F2] 110g - Candy Cane [F2] 126g- Candy Cane [F2] 128g - Candy Cane [F2] TOTAL: 710g 👍

66g - Candy Cane [F2]  (top section)  75g - Candy Cane [F2]  (top section) 98g - Candy Cane [F2] 107g - Candy Cane [F2] 110g - Candy Cane [F2] 126g- Candy Cane [F2] 128g - Candy Cane [F2] TOTAL: 710g 👍