Hi Growmies, She has been topped and growing nicely, and slowly starts stretching through the ScrOG. The plant has not shown any signs of stress after the topping. I will let her fill the net to 60% and then flip her. I unfortunately snapped a branch, which I right away taped and it seems like it’s going to survive with just a little stunt in growth of that particular branch. Have already removed a few of the lower side branches and Will start with a light defoliation this week. From my experience it shocks the plant less than doing big batches at once. Roots have started to grow in the tank, which means that another growth spurt is to be expected soon. Thanks for ready and apologies for the delay. Merry Christmas :)

Stressing them out let’s see what they got

So the start of flower is here 😌. I'm giving her a little worm casting, some cal-mag and a hint of PK booster. The cal-mag has N in it, so I'm hitting all my bases. I may put up a net to help rangle the multiple tops I have going. I'm going to give her a good defoliation at the end of the week jut expose those covered sites. Happy with the nutrients so far from Aurora Innovation : Soul line; players pack. No deficancys or issues as of yet and she is looking healthy

Week 5 on these amazing girls. They're full into the flower stage and the smells are starting to come through super strong. I've switched over to bloom nutes and they seemed to never skip a beat. All in all excited to see what the coming weeks have in store. Happy Growing.

I made a concoction of living soil using ingredients I could find of subcools formula. Theoretically all i need to add is ph balanced water. And a tea once I decide to flower. I'm waiting for some gadgets[ph and moisture meters]to come in before doing any extensive watering.

One of the shorter phenos but I got a feeling she's going to be a bush!

Lemon Cherry is smelling amazing, they look as though they should finish quick, but I'll try to hold harvest until late this time. Not doing any special treatments, feeding nuts about once a week full biobizz schedule and taking down sick leaves. AK will probably finish last, looking very pretty.

Starting to pile on the trichomes and weight. Looking 🔥.

Cut the plants down on the 24th of April, drying room levels are 72°F and around 60%RH, I'm currently on Day #14 of drying and the buds don't feel fully dry yet, the main tops feel crunchy and dry but the lower smaller buds are still quite moist and smell like chlorophyll, I think I may harvest the main tops so I don't overdry and leave the rest in the tent for another few days, either that or put the rest of the buds in a brown paper bag to finish drying. Finished dry trimming the plant ended up with 200 grams dry weight not including trim there's another 2 ounces of trim which if you want to include that would bring the total weight from this 250W LED to 256 grams. I'm super happy with the result of this especially for my first grow and from one autoflower, it can only get better from here on out. FYI Not sure why I can't edit the lights I used but the bloomgro 600W LED is PULLING AN ACTUAL 250W FROM THE WALL so the gram/watt should be .8g/W

💩Holy Crap We Are Back At It And Loving It💩 Growmies we are at DAY 42 and she's just killing💀it👌 The Gorilla Punch Is Amazing 👏 👉We are in full flowering mode for the stretch 👈 OG 👍 GP 👍 the AF was the hold out but shes finally went into Preflower 👈 So Shit , I gave them just a tad to much nutes at the start feeding 👈 But I have since fixed it So I'm still doing some low stress training 🙃 and some defolation 😳 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈

Barney's Farm Watermelon Zkittlez Auto from North Atlantic Seed Company. Germinated in rapid rooter placed on AC Infinity propagator. Temp 75º RH 85% + Watermelon Zkittlez Auto by Barneys Farm Watch out, because Watermelon Zkittlez Auto has the power to bounce you sideways like a ninepin. Discover her distinct fruity flavours as they froth and fizz from this phenomenal trichome loaded THC factory. An easy to grow yet awe inspiring autoflower, this plant is capable of producing prodigious yields in excess of 550gr/m² in experienced hands. That said, she is an unfussy plant that pretty much grows herself, so can be an ideal option for beginners and experts alike. This sensational specimen will spring into flower when planted in just 70 days, a real speed demon. An easy girl to trim makes harvesting a synch. Later on her effervescent effects will gently pamper you into an extremely peaceful state of mind. Watermelon Skittlez Auto grows to a height of up to just 140cm making it ideal for terrace and balcony growing. High levels of THC (26%) ensure a profound and long lasting euphoric effect. Make sure you try the totally tropical flavours of Watermelon Zkittlez Auto at least once in your life. You will not be sorry you did. Genetics Watermelon Zkittlez x BF Super Auto #1 Indica / Sativa Percentage 60% Indica / 40% Sativa Flowering Time 70 days from sprout Grow Difficulty (1=Easy, 5=Hard): 2 Flavor Profile Fruity Watermelon, Sweet berries

4.7. DSD grew by far the biggest Seems to take the heat and direct sun well. Some bugs are eating the leaves. Will apply neem. Food every 10 days or so

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

Northern soul. This strain is one of my top grows. The smell is very strong already. With the leaves so big and wide like they are we all know its an indica strain.very happy so far with this plant.Happy growing.

9/1 About one more week till chop the trichome pic doesn’t really get a look and see the amber but it’s some coming in

Ich bin der Meinung das Bilder mehr als 1000 Worte sagen. Ich hab sie in den letzten Tagen ordentlich gespült und dann dunkel gestellt. Heute also am Ende der 12. Woche habe ich sie letztendlich geerntet. Die trichome waren alle milchig bis bärnstein Farbend. Ich lasse sie jetzt eine Woche mit eingeschalteter Abluft troknen.

Hello dear readers! I’m in a hurry to share the results :) 26.02 was added to bio protect 0.5l over the leaf. The leaves of the plant were carefully spray at night from all sides.😋 27.02. It was decided to produce the crop topping. After topping immediately poured solution with fertilizer. And T.A. Fulvic was added to the general fertilizer. The flight is normal!💪 Isn’t it a little early for a topping? This week I plan to hang the lamp on 600W MH and water 1part on 2days per liter. Maybe add calmag. Water under the filter with the initial value of 130ppm. The week watered with 340ppm. I think to increase to 500ppm.😉