Likes
Comments
Share
Likes
11
Share
The ladies are thriving and loving the Advanced Nutrients Organic Line. The smell in the tent is amazing I could literally breathe that air in all day! My CandyLand has been the biggest through all three plants lifecycles. But all three are looking strong and healthy. The lights will be transitioned into the flowering schedule throughout the week. To all my fellow greenthumbs I hope everyone has an amazing grow week. 🤙🏾
Likes
6
Share
It was such a nice experience for me with this strain, first time ever growing her, she had a little bit of long internodes and thought she wasn't gonna be very productive, however the nuggets are so so hard and compact and the quality is just brutal, doesn't even look like she's s been outdoor grown, I love this strain for the rare strong smell like very sweet and floral with that strange diesel notes mix the sweet tones, I would love be growing her my whole life, I definitely will keep growing this lady FOR SURE!. thank you so much and hope you guys enjoy! 💎🙏🔝💚
Likes
15
Share
@dank604
Follow
Girls are trucking along without much issue. I did have a bit of PH flux due to my PH meter calibration being off but no biggie, she didn't show too much signs of stress. These girls are starting to stink which I'm happy about, hoping for a really cheesy harvest :D
Processing
Likes
12
Share
BLUE CUSH 35 Days from sprout. Light training. Leaf tucking and pony tailing. Pony tailing seems to help with the side branching. She is genetically a small plant I believe, but she might be smaller then expected.. Possibly due to lower RH early on. Otherwise she seems to be doing ok. Attempted a layer of clay pellets after soaking in PH'd water for 16 hours, to combat the gnats from reaching the soil. I feel like sand may have been a better choice and removed the clay before feeding again. There are so few gnats that its not much of an issue, but I'd like to eliminate the threat before flowering really kicks in.
Likes
4
Share
B.A.C. schedule goes on with bloom week 6 : a bit more PK Booster again and no more Final Solution. Motherplant looks better after a massive plain water watering, I'll alternate nutritive solution / plain water for now. Clones buds' are getting fatter, faster than motherplant ones, and a few big leaves are yellowing. There are trichromes everywhere and smell is more powerfull. 2023/04/12 : first check on trichromes... there are already amber ones on clones' leaves, not yet on flowers. Mother plant is a bit late, only clear and cloudy trichromes for the moment. I would say 2 to 3 weeks before harvest.😊
Likes
24
Share
Las 4 nenas del scrog 12/12: están siendo alimentadas con advanced nutrients(dosis indicadas en la foto de la tabla) -micro -blom -grow -b52 -rhino skin -big bue -bud ignitor -bud candy -sensi cal mag xtra Las 2 nenas en macetas de 30LT 18/6: por el momento están siendo alimentadas con advanced nutrients(dosis indicadas en la foto de la tabla) -micro -grow -blom -b52 Por la tardanza y mi decisión de no regar hasta realizar el transplante, se ve una prácticamente sin vida... Había pensado en sacrificarla.. finalmente no lo hice y ya se encuentra en su macetero de 30LT, la verdad sin esperar mucho de ella, debido al mal cuidado que le dí
Likes
35
Share
Day 29 and she is doing well im expecting her to start to fatten up in the next week. im thinking 2 more weeks at least till flush. also my defoliation is very light at this point
Likes
10
Share
@Gamfin
Follow
// Day 91 She is getting there. The buds ware not fattening up as much as I wanted to but her trichomes are almost all cloudy and a very low minority is amber. So I guess I give her 2-3 more days and cut her down on friday or saturday. This time I try out the bro science: Befor cutting, I'll let her stay in the dark for 48h. So maybe I turn off the lights tomorrow until friday and chop her down. The bro science hypothesis is that the not ending darkness will give her a last stress which boosts trichome production. || Edit: I‘m not here for bro science, so I am not doing that shit // Day 94 Those are the last videos and pictures from her. I chopped her down today. Since I need to do a bud wash (spider mites, outdoor grow), I can't hang the plant whole. So I cut the stems into as big pieces as possible and washed them with deluted hydrogenperoxide. I hanged them into the tent and try to dry them as long as possible.
Processing
Likes
68
Share
hi guys I take the photos with a new camera i take it in 4k mod 😀👍 but idk if it's 4k on the website because he resizing the picture. 😒 some news we can see the roots go through the pot. She can take more oxygen 😂 I do sometimes some small defoliation. I reduced hours on week 6 to switch to flowering period, the way than i take : day1 18/6 day2 17/7 day3 16/8 day4 15/9 day5 14/10 day6 13/11 day7 12/12
Likes
78
Share
@Hou_Stone
Follow
Hello friends, another beautiful day for growing indoors🌞 Here are my 4 plants which are continue to grow 🌿 ✂️This week I am doing a light defoliation on my Bana Krumble🍌, I will continue in the coming weeks to reduce the humidity in the tent starting with the leaves and new shoots from below which capture less light from the lamp ⌚️At the end of this week I start to reduce the schedule where my lamp is on by 1 hour per day to reach 12 hours of day and 12 hours of night next week and start flowering. ------------------------------------------------------------ 💧Watering each pot: Day 25 : 0.5 L Day 28 : 0.5 L I use tap water, adjust the ph to around 6 and water ------------------------------------------------------------ 🔥❄️Temperature of the week : Day : 19-23°C (Humidity : 60-75%) Night : 14-17°C ------------------------------------------------------------ 🚀Equipment of the week ⭐️ : Light FC3000 Mars hydro. power 95% at 50cm Extractor 6 inch Mars Hydro. power 1/10. ON 24/24h 2 fans to circulate the air inside the tent. Each on for 30 minutes then off for 1 hour. this rhythm repeats itself in a loop Heating mat 95x95cm. ON 45 minutes. OFF 30minutes. In a loop. The day only ------------------------------------------------------------ 🌎 I created my discount code on Mars Hydro. Get 5% off with my code: houstone5 By using a code, in addition to getting a discount, you directly support the creator who shares it.🙏 So if you make purchases on Mars Hydro don't forget to enter a code😀 Mine is "houstone5" 😉 https://www.mars-hydro.com/?acc=hou-stone ----------------------------------------------------- My instagram 👨‍🚀🌱 : https://www.instagram.com/hou_stone420/ ------------------------------------------------------ Thanks for your visit 💚😀
Likes
14
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Likes
20
Share
@Xabii
Follow
Ran into some Calcium/Phosphorus trouble !? First deficiency in the grow. Topped up with new nutrient solution, added some CalMag and Universol Yellow 12/32/12. Raised PH to 6.1 and EC to 1850. Added 100ml 12% H2O2 to make sure no PH trouble occurs. Switched the Carbon filter around so that I can lift my light a little more. Orion F1 is getting really frosty ~2 more weeks? The Northern Lights take some more time.
Likes
19
Share
Sorry for not uploading i had some ups and downs in my life, and with the college is really hard to work all those things together. But now i am back and going to hustle really hard.
Likes
34
Share
@Salokin
Follow
Grow Diary - Week 1: Germination of Watermelon Candy F1 Hybrid Automatic Introduction: Greetings, Growmies! Salokin here, thrilled to share the exciting germination week of our newest addition, Watermelon Candy F1 Hybrid Automatic. A special shout-out to Patricia from the Zamnesia family for granting us the opportunity to be among the first to cultivate this fantastic strain. Our journey begins as we prepare these seedlings for their future home in the controlled environment of Tent X. Germination Process: On January 24th, the Watermelon Candy F1 Hybrid Automatic seeds were carefully placed in the EZ-Plug germination setup. After a brief 1 1/2 days in these nurturing plugs, the seeds sprouted, marking the commencement of their growth journey. The uniformity in their germination is impressive, showcasing synchronized and promising starts for each seedling. Growing Environment: While they're not yet in the Tent X environment, our Watermelon Candy seedlings are thriving in their current setup. We're preparing the optimal conditions for their transition into the controlled environment. Observations: The seedlings exhibit a thriving and lush green appearance, though slightly trailing their tent mates. This expected difference in early-stage growth is carefully monitored, and adjustments are made to ensure optimal conditions. Acknowledgment: A special thanks to Zamnesia Seeds and Patricia for the sponsorship and the opportunity to cultivate this exciting strain. We eagerly anticipate observing the Watermelon Candy F1 Hybrid Automatic's journey from germination to harvest. Stay tuned for more updates as we nurture these promising seedlings through their growth stages. Stay Lifted, Salokin
Likes
19
Share
@Mazgoth
Follow
the plant has built an incredibly strong trunk that with great difficulty you can even shake the plant a little.The cold prevails unfortunately but the plant seems to cope with it and produ flowers
Processing
Likes
3
Share
First sign of mold formed. I cut the branch, remove moldy bit and drying it. I needed to get her inside as soon as possible, so this made me harvest the Peach Puree CBD faster as she was using the lights, I brought the church in and put her next the peach for her final night, you can see her in the 3rd picture. I needed to do some super cropping to get a more even canopy so that the light gets as many buds as possible. Was still not happy with how the lower branches are getting barely any lights so I did some foliation and tied the lower branches so they are higher (you can see some side ways branches in the video, that is because I pulled them in). Had to some reflective material lying around, so I wrapped that around her and she is looking very comfortable in her new home now. I've put some hay which I had laying around on the soil with some leaves I cut to act as some mulch which could be why she is drinking very little water, haven't had to water her since I brought her in 3 days ago (mind you she was under a lot of rain before that).
Likes
11
Share
@CocoLogic
Follow
Sept 13th: (F27) Fertigation once a day with same recipe (1200 EC 6.1 PH) watered until 10-20% run-off Sept 14th: (F28) Fertigation once a day with same recipe (1200 EC 6.1 PH) watered until 10-20% run-off Sept 15th: (F29) Fertigation once a day with same recipe (1200 EC 6.1 PH) watered until 10-20% run-off Sept 16th: (F30) Fertigation once a day with same recipe (1200 EC 6.1 PH) watered until 10-20% run-off Sept 17th: (F31) Fertigation once a day with same recipe (1200 EC 6.1 PH) watered until 10-20% run-off Had to supercrop 1 branch on the PE#2 since it was almost in the roof of the tent Sept 18th: (F32) Fertigation once a day with same recipe (1200 EC 6.1 PH) watered until 10-20% run-off Sept 19th: (F33) Fertigation once a day with same recipe (1200 EC 6.1 PH) watered until 10-20% run-off