The Grow Awards 2026 🏆
Likes
Comments
Share
2/17/2024 - Vegetation Week 1 Day 1- I removed some of the water to see where the roots were only one had roots in the water. However I want to go ahead and get them on Week one Nutes So I am over 50 gallons of water in the system so I mixed the Trio at a 1.0mil per Gallon but restricted it to a top of 50 gallons period. I top fed the other two to keep encouraging root growth. I also finished my drying and curing from my last run and wanted to show what it looks like all bagged up and in the cannatrol. I added the following Nutes: Silica = .5Mil/Gal= 25Mil CalMag= .75Mil/Gal= 37.5Mil FloraMicro = 1Mil/Gal= 50Mil FloraGro= 1Mil/Gal= 50Mil FLoraBloom= 1Mil/Gal= 50Mil ORCA = .5Mil/Gal= 25Mil EPSOM- 1 big pinch 2/18/2024 - Vegetation Week 1 Day 2- I top fed #1 and #3 since they still don't have roots in the water, I will continue one top feed a day until roots hit water. 2/19/2024 - Vegetation Week 1 Day 3- #3 now has root in the water.. Yay!! I now have #2 and #3 with roots in the water so no top feed for them. I only had to top feed #1 and the only reason I didn't just go ahead and cull her today was I am responsible for breaking her tap root and stunting her, I wasn't careful enough and she was the first to show a good root. In that vain I will carry her a few more day's top feeding but if not root by the end of the week she is getting culled. 2/20/2024 - Vegetation Week 1 Day 4- Today I Ensured the PH is in range, I refilled the Humidifiers, I top fed #1 since the roots are still not in the water. I also removed the humidity shields from #2 and #3 today the ladies were touching the sides so they are done with the extra shields.. 2/21/2024 - Vegetation Week 1 Day 5- Today Morning: I Ensured the PH is in range, I refilled the Humidifiers, I top fed #1 since the roots are still not in the water, Evening: I decided that the roots of the two are looking great so I am going to drain and bump the Nutes to a full Week 1/ Week 2 Nute base. I added 36 Gallons I added the following Nutes: Silica = .5Mil/Gal= 18Mil CalMag= .75Mil/Gal= 27Mil FloraMicro = 3Mil/Gal= 108Mil FloraGro= 2Mil/Gal= 72Mil FLoraBloom= 2Mil/Gal= 72Mil ORCA = .5Mil/Gal= 18Mil 2/22/2024 - Vegetation Week 1 Day 6- Today I Ensured the PH was not too high as the system continues to cycle the water and adjust, I refilled the Humidifiers, I top fed #1 since the roots are still not in the water, 2/23/2024 - Vegetation Week 1 Day 7- Still have to Top Feed #1 no roots in the water, however she is still progressing nicely slower than her sisters with roots in the water but still going strong.
Likes
15
Share
@Chubbs
Follow
420Fastbuds FBT2313 Germination Week Time has come yet to start another amazing Tester strain from 420Fastbuds FBT2313. Started germination on 2/7 by soaking the seed in just water for 48hrs then planting it directly in the soil (Roots Organic 707) in a 3gal fabric pot. I spray the top soil with my gallon sprayer keeping it moist for the next week. After 48hrs in the soil we have sprouts that emerged that appear to be healthy and happy. All in all Happy Growing
Likes
5
Share
Disconnecting controller cones in handy
Likes
4
Share
📆 Semana 10 La Ice Cream Haze encara su última semana con parte del trabajo ya hecho: una parte cortada en su punto y otra quedándose unos días más para apurar madurez. Los cogollos que continúan en la planta siguen endureciendo, con la resina cada vez más espesa y los tonos morados plenamente definidos. El aroma cremoso-afrutado se concentra aún más gracias al lavado previo. Ahora solo toca mantener ambiente estable y dejar que esa segunda tanda llegue a su momento ideal. ✂️ Remate final: precisión, paciencia y doble cosecha afinada. ¡Seguimos creciendo fuerte 💪!
Likes
8
Share
Used real growers recharge for the first time as directed with RO water Day 13 first watering with RO water ph to 6.3
Likes
16
Share
Week 5 flower going well. Nothing much to report. Increased the drip as she is taking in more water. Turned up the fans to 100% for maximum flow, and due to that, the tent got a bit warmer and a bit dryer, so the exhaust fan and humidifier are working a bit harder. 75-77 deg F, 50-60% RH. Not sure if the lights are to intense or if it’s purple coming through, but at the highest tops there seems to be a bit of discolouration on the newest growth, just at the tips of the new buds. But I’m looking really close and it may be purple, not brown. I’ll keep an eye on it and turn the lights down if symptoms worsen. This plant is growing strong and uniform. Average frost so far. Hopefully she keeps growing well until the end. Thanks for the views…keep calm and grow on!
Likes
9
Share
@MassEric
Follow
Moving along nicely now. The timelapse is showing some nice growth over the last 6 days. The next month should really be fun to watch. I plan to let them stay in the buckets for another week before I move them into the larger containers. Not much else to see early on. They should be ready for their first clipping here soon. Fun fun!
Likes
57
Share
Week 1 of the latest cycle and starting out with some new hardware and an expanded grow print👍. We’re running 4 autos via a recirculating Dutch bucket system. First time on a dutchy so it’s gonna be interesting to see how it stacks up against DWC. I’ll give a full rundown on the system I’ve cobbled together on the next update. So far - all seedlings have germ’d without issue using the standard p-towel method. Why more people don’t use this method on GD is beyond me. It’s so reliable that some breeders even warranty your seeds if you use this method and more than 1 seed fails to crack. We’ve got little sprouts coming up now and it’s all just waiting for those first couple fan leaves to come out and those roots to run to the bottom of each bucket. They’ve been placed in root riot cubes (essentially a version of rapid rooters) like most of our runs and I’d recommend their use with all autos. Time and stress on young autos is key so they need the absolute best start you can give them👌. End of week update - looks like we got 4 quality little seedlings here👍. Alls good other than battling a ph issue for most of the week. Keeps spiking overnight for no real reason - hopefully it’ll even out and isn’t the early sign of a major problem🤞. Background The strain line up on this grow is look’n quite saucy 😈. We’ve got 2 FB strains this time around - Gorilla Cookies (seems we always have some GSC cross in the works). Mainly because the colours look stellar and remind me of a sugar breathe we did last year that was 🔥. The other FB is their original Cheese strain... because we already smoked all our cheese... and we really like our cheese...😉. Emerald triangle was kind enough to include a freebie of Lemon Haze. Wasn’t really big on the list but we haven’t done a haze strain to write home about yet so worth a go👍. The last is a Cherry auto from Bomb seeds that we’ve been trying to get to for months. Let’s just hope that she’s not a dud like the last bean. The new digs for this run are courtesy MarsHydro👊. Their 2x4 single grow tent, paired with a shiny new 240w QB courtesy ViparSpectra. These folks were kind enough to discuss a collaboration and as a result, here we are to test out the gear with an inaugural run of autos. Each week, we’ll try to expand on some of the benefits of each, as well as any limiting factors or considerations that need attention when pondering purchase. Already I can say that both are high quality products in terms of overall craftsmanship. MarsHydro 2x4 Grow Tent: Excellent construction in terms of durability. Reinforced stitching on the zippers and corners ensures zero tearing. Conveniently placed screen vents and intake/exhaust ports. The ceiling exhaust port only exists on the right side. Perfect for me but not great if you’re running exhaust from the top on the left side (left side wall port makes up for this however). The aluminum frame is rigid enough to support the weight of the lights and accessories. Once you have some weight in the tent, she’s go’n nowhere and you can assemble and break it down in record time if moving or stashing the grow op. Only limiting factors I’ve noticed is that temp. Control will be an issue for a tent. It just doesn’t have the same insulating ability as a wood cabinet or other permanent enclosed space. No worries, this is offset by a small desktop heater and keeps the environment exactly where desired. The other issue was a production problem - the ceiling vent was accidentally stitched into the corner seams on the assembly line. Again, no real issue - just pulled it out with no damage or fraying to the tent or port👍. Website link here: https://www.mars-hydro.com/grow-tent/buy-mars-hydro-grow-tent-24x48x70-2-x-4-cabinet-closet-grow-box-upgraded-diamond-1680d-mylar-for-sale ViparSpectra 240w Quantum Board: This thing is sleek and slick in terms of design. Closest comparable to it that I’ve seen would be spiderfarmers line of qbs. They feature the same top-o-the-line components and roughly similar spectrums. Where VS takes the advantage is in the convenience of the dimmer nob which is easily accessible and works great at 50% with no strobing👍. The heat sink is also larger which contributes to lower temps. That’s not a good thing in my case but beneficial for most folks. I can already say that this will be a great fixture through all stages of growth. Where I know this light will excel will be in the veg. Stage for sure. Dimming function gives seedlings a much better chance of success with the ability to use lower lighting levels early on and the coverage area on a 240w is great. The average grower will find this panel suitable and fitting to their needs in a 2x4 grow space although I’d suggest 2 units if going any larger than that. The total output in this space equates to about 30w/sq.ft. Which is a decent amount of coverage based on power vs. Growprint. Ideal for veg. Certainly but, in flower - I tend to run closer to 50-60w/sq.ft to achieve higher yields. Again, similar fixtures have performed admirably in the past and while this wouldn’t be considered an “entry-level” fixture, I’d recommend that any grower new to the game not skimp on lighting and start with one of these. The price points are a great value for quality LED tech. These days, so there’s little reason to even consider a lesser fixture👍. I have no detail on limiting factors for this light as yet but have heard that stock branded fixtures don’t necessarily incorporate enough red diodes. I’ve seen no issue myself but confess - I’m no lighting guru. Website link: https://www.viparspectra.com/collections/xs-series/products/xs-series-xs2000 ***8% discount when using code: “ItBudWhisper”*** Happy to have you along for the ride if you made it this far through my opening rant!!😎🤟😎🤟😎
Processing
Likes
1
Share
Bonjour à tous, ces derniers jours ce sont bien passé pour mes petit bébés elles grandissent doucement mais sûrement.C’est la première fois que je travail avec cette gamme de produits (je vous est mis des photos des produits 😉) pour l’instant j’en suis satisfait après, il faut voir le résultat final ce qui est moins facile 😂. Mes petit bébés commence leurs 5ème semaine (je me suis trompé d’une semaine 😕 désolé 😉) trop pressé!!! 😂 de mettre de nouvelles photos 😜. Je vous dis à là semaine prochaine vivement 😉 bonne journée à tous. Je vous remercie 😉.
Likes
12
Share
@Bluemels
Follow
Tag 53: Jede Menge entlaubt habe ich die Fat Banana heute. Ihr fehlt es noch etwas an Höhe und Form. Das will ich die kommenden Woche in Angriff nehmen. Und dann schicke ich sie nächstes Wochenende in die Blüte 😊 So jedenfalls mein Plan 😜
Likes
2
Share
Que pasa familia, vamos con la septima semana de floración de estas Gorilla Cookies Fast Flowering, de FastBuds. Agradezco a Agrobeta todos los kits obtenidos de ellos 🙏. Hasta aquí veis que llevan buen progreso y el color que se marcan es espectacular. Vamos al lío, el ph se controla en 6.2 , la temperatura la tenemos entre 22/24 grados y la humedad ronda el 50%. El fotoperiodo a 12-12. Estás próximas semanas veremos cómo avanzan. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨
Likes
7
Share
tela de scrog adicionada, agora esperar mais 2 semanas de recuperação e colocar ela em floração. grow 60cm x 60cm ( 2x2)
Likes
8
Share
The cookies strain from fastbuds are sooo amazing. This pheno looks again so yummi, love it.
Likes
30
Share
Feeding chart for my girls Flowering For 1 liter 3 ml Plagron coco a + b (NPK 4-2-4) + once a week 0.5g magnesium sulfate + 0.4 g T.A Silicate (or 2ml cal-mag) + once a 2 week 2.5 ml Megafol Valagro (foliar) 2.5 ml Maxicrop Cream (foliar)
Likes
24
Share
Flowers started showing up this week. Flowers forming on nodes. Did a flush this week for 3 days straight with RO water and CalMag+ to 250ppm and 5.8PH.
Likes
18
Share
easy enough week. added dehumidifiers in both tents as i really have them packed and its best we take care of that now than run into diffs later. nutrients all good, much the same. harvested bday cake auto 45g wet weight. maybe was hard on her at the start but whatever.. looks good, hopefully tastes as good. 3rd week in and these girls are massive.. like really impressive. no hype.
Likes
Comments
Share
Nice color changes on MF Roy #4 this pheno has been interesting from start to finish! Excited to see what the upcoming harvest and dry/cure has in store!
Likes
47
Share
@Reyden
Follow
Continua il tragitto verso metà della fioritura e ieri sono state sciacquate solo con acqua a ph neutro. The Sin è la pianta più alta di tutte con foglie più strette presentando caratteristiche più Sativa..quando entro nel box sento odori buonissimi 🤤 da rimanere lì ore per cercare di catturare più possibile ogni sfumatura della sua fragranza 💜non resta altro che aspettare 🌱👌
Likes
Comments
Share
Wir starten in die BW 5 Pflanzen sehen sehr gesund aus. LST ein wenig nachjustiert. Richtiger gesamt Bericht Ende der Woche