Hello, fellow growers I thank you for having dedicated your attention to my garden. We tried to do some order to distinguish the genetics, the Epic buds are with brown pots

:)

end of week 5. I barely feed these ladies so they usually run out of nutes by week 6 and I can feed so lightly or almost feed light to the end and have awesome taste. that way. love it here lezgoo. Grower love. thanks for liking

N'hésitez pas à me contacter si vous avez des questions! Pour préparer votre solution, dans votre réservoir ou arrosoir : Mettre en premier la base (Iguana) Ensuite Ancient Earth Et enfin les bactéries ASSUREZ-VOUS D'UTILISER UNE EAU DE BONNE QUALITE (EC < 0,2) POUR DE MEILLEURS RESULTATS. J'utilise un substrat non enrichi pour permettre le meilleur départ à mes plantes. Il s'agit du Promix de Plagron, il a une EC proche de 0, c'est pour cette raison que je commence les engrais assez fort dès le début. Les plantes sont très gourmande sous LED haute intensité et l'enracinement est rapide. J'arrose tous les 3 jours environ avec 2 arrosages à l'engrais et 1 à l'eau par semaine. Je n'attend pas que le substrat sèche complétement sinon ça réduit l'efficacité de l'arrosage, ça détruit la faune et éventuellement facilite la cristallisation des minéraux. Au niveau du volume d'arrosage, il faut prendre en compte 1/3 de la taille du pot. Pour un pot de 1L je vais donc arroser environ 300ml. Pour un Pot de 10L je vais arroser environ 3L. Il est important d'arroser doucement pour éviter que l'eau ne coule tout de suite au fond. Il est important d'avoir au moins 15% de drain pour s'assurer d'évacuer tous les nutriments non consommé et faire la place aux nouveaux. IL EST PRIMORDIALE D'EVACUER L'EAU AU FOND DES COUPELLES, c'est une eau qui est chargée en nutriments non consommé et on ne veut pas qu'elle remonte dans les pots car cela risquerait de créer des blocages. Au niveau de la technique de taille de formation, je réalise tout de suite une FIM que je reproduirai dès que l'apex aura repoussé. La première FIM est la plus longue mais les suivantes sont très rapide car la plante s'habitue à la technique et cela la stress beaucoup moins. En général il faut reproduire la FIM tous les 3 à 4 jours en fonction de la vigueur. C'est une technique très facile à mettre en œuvre et ne demande aucun matériel. C'est aussi la plus rapide pour obtenir des buissons. N'hésitez pas à me contacter si vous avez des questions concernant la FIM! Je retire également les feuilles supérieur (pas toute pour éviter de ralentir la plante) qui cache les secondaires pour augmenter l'efficacité de la FIM sur la croissance des secondaires.

Overview of my grow: Tent: Secret Jardin DS120 4 x 4 (120 cm by 120 cm) Lights: 2 x 120 Watt CTlite c4 clusterled Climat: Trotec Dehumidifyer 240 watt- 10L/24h Filter: Prima Klima carbon filter PK2600 fan: 2 x Secret Jardin 20watt osc. fan Pots: Gronest 4 x 11 liter airpots Water : automated water system PH: bluelab Nutrients: Plagron cocos A + B Plagron PK 13/14 ATA cal/mag Epsom salt no rights to music in the videos Week 6 She is doing great, She has grown 15 cm in height. She is developing in a nice indica shape i performed HST on the main and defoliation to give the tops more light. She looks a bit pale so i raised up the nutsThanks for checking and stay safe all 😋

…éliminer la plus petite.

i will up date weight when i have finished trimming

Fo' Twenny Back with another update on our GelatO.G from Seedsman. She is looking really awesome. She keeps stacking on the calyxes and getting frosty! Overall, super healthy with leaves "praying" to the canna-gods! Now, on with the deets! LIGHTING: Increased lighting at dimmer last week with good results. Was about 70k LUX on average @ Canopy. Turning it up a bit more this week. 8 Outer Boards @ 665.5w 6 Inner Boards @ 601w LUX APP MAXES OUT READING 78750 LUX @ Canopy. Lets hope its not too much! RHIZOSPHERE: If you didn't tune into the last update, I had just flushed pots due to high PPM runoff. pH of runoff was at 6.3. PPM and pH are tested using 2 separate calibrated BlueLab meters. All Water/Fertilizer is shared by 3.25 plants (.25 because autoflower gets less than a quarter the volume of the larger plants) 2 GAL PLAIN H20 w/fungicide prior to feed PH to 6.0 1 tsp/gal of Southern AG Garden Friendly Fungicide - Bacillus bacteria known as Bacillus Amyloliquefaciens (OMRI Organic Bacterial Innocclant/compare to Hydroguard) Waited 15 minutes after plain H2O and fungicide 5 gallon tap H20 through 2 KDF filters START PH: 7.5 (taken from reservoir that contains impurities/residue from previous feeds) START PPM: 500 (also taken from reservoir) TEMP: 76°F .125 tsp Ascorbic Acid added to help reduce chlorine/chloramine WEEK 4 FEED SCHEDULE: .5 tsp/gal Sledgehammer (Surfactant) .125 tsp/gal Gringo Rasta Cal-Mag 1 tsp/gal BIG Bloom .5 tsp/gal Grow Big .5 tsp/gal Tiger Bloom .25 tsp/gal Kelp Me Kelp You .75 tsp/gal BEMBE .25 tsp/gal Beastie Blooms (Increased due to low ppm of solution) PPM: 1150 Added to Increase PPM .5 tsp/gal Tiger Bloom PPM: 1350 PH: 5.8 1 tsp/gal RECHARGE .6 ml/gal MAMMOTH P PH: 5.9 PPM: 1490 Thanks for checking out my diary. If you liked this diary, check out my other diaries and give me a follow! Until next time... Peace ☮️, Love 💚, And Frosty Nugs ❄️🌲! -Fo'Twenny

Vamos a por otra semana mas, 🔥 🔥🔥 los clones estan contando los dias para terminar de coger color

It’s been a long day potting these girls into there new home. All is looking well. Little bit of heat stress but ime sure they will cope 🤞

We'd love to raise this guy again! And again. And... Sorry if there are not enough words, this is our first report 😅 Next more details 😇 peace

Week 1 Day 1 - 8/12/2023 1st Water change Day! Such a special time it is when you remove the little bit of Nutes that you gave them as an appetizer and you give them their first real meal. Added 39 Gallons of Water to my system SILICA= .5mil/Gal = 19.5 = 20mil Root Drip = 1mil/Gal = 39mil Cal Mag= .25mil/Gal = 9.75 = 10mil FLoraMicro= 3.0mil/Gal = 114mil FloraGro = 2.0mil/Gal = 78mil FloraBloom = 2.0mil/Gal =78mil ORCA= .5mil/Gal = 19.5 = 20mil Week 1 Day 2 - 8/13/2023 Everything is looking good the roots are making their way to the water and the new grow is looking nice and green. Week 1 Day 3- 8/14/2023 Everything is right on track, they are looking beautiful and in the praying position all leaves happily lifting towards the light. Week 1 Day 4- 8/15/2023 A little worried today her birth Twin the BA I am growing out is looking great and is raised towards the light and this one is just slightly under.. Will keep an eye on Her. Week 1 Day 5- 8/16/2023 Walked in and the humidity was under 60.... ohh noooooo.. So I added 2 humidifiers to the tent and attached them to my InkBird controller which is set to 62. Also looking at the roots and she has some poking out the bottom but just not in the water yet.. Luckily we are set for 14 days before next water change so the system will stay stable and her sister already has roots in the water so she should only be a day or two behind.. we will just keep tracking but she is delayed. Week 1 Day 6- 8/17/2023 Roots in the Water!!! Huston, we have a successful launch. This grow is on! Humidity was a little low this morning so I refilled the humidifiers. Other than that the temp looks great, the PH looks good, the PPM looks good the plant is in the praying position and all damage from the little drowning from over filling the cloning machine seems to have been fixed. Happy Happy. Week 1 Day 7- 8/18/2023 Yay.. week 1 in the books, roots in the water growth has started. Everything for growth and environment is looking good and on track, there are a couple of mutations with this Lady will keep an eye on those leaves. IMO this grow is going A lot during this week 1 then week 1 of the last grow when I had them drowning. Really excited on how this grow is going to come out.

Good growth, Blueberry powering through cal mag issue. Skywalker will be first to harvest for sure. Insane amount of frost on that plant. Glueberry og continues to require fairly frequent defoliations to open up canopy. Blueberry starting to get some subtle berry coming through.

Three weeks into flower and things are moving along. I defoliated some of the lower branches and spread out a few branches here and there. Other than that it's the same situation as always. Nutrients are pumping and lights are beaming. Everything is running smooth and all is well with the world. Like some namaste shit going on around here at the moment. Could very well just be the calm before the storm...

Stopped feeding this week other than one watering with molasses. Needing to be watered every 3 days. Other waterings using ph'ed filtered water to 6.5 set on my air bubbler for a few hours before watering. She's very close to being ready. Another week and i think she will be perfect. Notice leaves fading end of last week and they have been getting more color throughout the week. Bud growth only happening closes to the light and much of orange hairs are white. Not a ton of amber trichomes yet which is good. Really liking how this plant is turning out. Nice loud terpene profile and fat dense frosty buds. Trimming should be pretty easy on this one which is a relief knowing how much work I have ahead of me. I think this very could be the fast version.

For the Herbies contest - https://growdiaries.com/diaries/157348-grow-journal-by-dabbertglobberfield#gallery=6777378 - Grandmommy Purple is guilty multiple noise violations for being too loud and for stanky funk. Harvest - 169 days / 66 days in flower Well, we did it. I made it to the end. All I can think is...WOW that was A LOT of work. But I think I had very good results for a first time grower. I For harvest, we took Plant B and D and prepared them for immediate freezing. Altogether, I ended up with 1212g wet on plant B and 1089g wet on plant D. I ended up freezing 1816g of this. There was some from each of these plants that was set aside from freezing because, for whatever reason, I thought they were not worthy of washing because of how progressed the leaf damage was from the root rot battle. So that was cut up and dried as nuggets instead of hanging like the rest. Sawtooth and Plant C were both harvested and hung in the tent to dry for 12-13 days. I think I overdried by 1-2 days because when I jarred them they struggled to raise up to 55%. So I am using rh% packs. After drying Sawtooth and plant C, I ended up at 459.8g for dried flower and 170.8g in dried trim. So just over 1lbs between the 2 plants and 4.15lbs wet between the other 2 plants that was washed for hash. So... are you for real with the effort involved with washing bud for bubble hash? I don't think I would do this in the warmth. I only pursued doing bubble hash cause it's cold right now and I figured that would really help. Even in the 30s(fahrenheit) stuff would stick. It's hilarious how sticky of a process this is. I hope you have a bunch of gloves, water, and ice to burn through. I went through over 60 gallons of distilled water and 80lbs of ice to wash the 4 lbs. I am envious of people in videos using a hose to collect, clean, and refill. Also, doing this as a 1 person show is the definition of insanity. I broke the washings up into 3 parts. The first part was was the tester wash. I broke off 420g of plant D's 848gs available. I used 7 bags to see where I would end up. I used 220, 160, 120, 90, 73, 45, 25. What I determined was that if I was hunting a specific micron with a lot of material this would help find what you can get. But for the next washing I reduced the amount of bags to 4; 220, 160, 45, 25. The time, with the 4 bags, I washed with 809g. I had a much more favorable experience and return this second time but I had green fast and probably used too much ice. The 3rd wash was the remaining 631g and I found an extra 137g I added of sugar leaves and trim, brining the 3rd wash to 768g. I used 5 bags this time; 220, 160, 73, 45, 25. By the 3rd wash I have become an expert in collection but also never want to do it again. lol. 2 of the 3 washes have dried and I have 43.4g of bubble and 2.8g of dry sift. 37.4g of that bubble is able to be pressed into rosin. I will probably press that dry sift as well. The other stuff is 25u or 160u that I will experiment with or cook with. The other stuff is drying so I can't add it all in. I pressed a bunch of trim and some flower. The trim presses nice and the dab is decent. I am working out a good temp for the flower. But the problem with all these tests to find the sweet spot is that I have all these testers to go through but want to keep pressing and trying that! I think I will need to work on a better storage solution. I can't wait for the fresh frozen bubble hash rosin pressing... I have over 20gs of bubble to put in one bag. I am really looking forward to this. But I will need to work up to that pressing since I have never pressed hash/kief/bubble before in my rosin press. So this should be really fun. I will 100% post an update of the hash pressing once I do that and also after the 3rd wash session is done drying. In closing, saying I learned a lot from this grow would be an understatement. I fully expect to start it back up in a few weeks after some R&R then some R&D. There's some things I will need to work on before I start again, such as: having a single external reservoir that feeds multiple plants, hard to clog and easy to use ebb and flow system, miscellaneous final run stuff like space for drying. So thanks everyone for hanging out and perusing the photos and or reading all my huge rambling updates and thanks to those for the help along the way.