This week is going to be hot. I expect everything to hit generative 2/mid flower this week. The #1 & #2 plants should hit that phase day 2 and day 3 of this week. The #3 plant around day 7. The coop poop I top dressed with is still feeding. It should be just supplemental about mid week. I'm feeding my gen 2 formula that's in the nutrient section for this week. The plants will get that feed daily once generative two phase begins.The one I didn't top is over 7' tall. I used it's height for the plants height. The other two I topped are just over 5'.

We have passed the month and we are madly in love with all our autoflowering plants, we have two per strain, one worked with a mainlining adapted according to the characteristics of the plant and one that grows straight, we can't easily give up the main cola. For now we will show you those worked with the techniques that are more interesting to see and later planted first to make them finish more or less together with those that will grow straight and fast. I couldn't stop shooting.... Our Rainbow Sherbet is really very very beautiful, the main lining was perfectly successful and there is a small difference compared to the others. In fact, we made the first topping cut and consequent formation of the mainfold at the second internode instead of the third. I managed to bend the branches very well and the laterals have already lengthened in a very effective way and perfectly parallel to the ground. and the lateral branches are always continuing parallel to the ground and I like it a lot. amazing this plant will have many effective branches. So topping at the third internode, main lining, no pruning until the third internode and topping them again so we have multiplied the buds adequately. The application of the techniques is a delicate moment also for fertilization. Topping slows down the growth of the plant a bit and does not make it require all that Grow fertilizer that is normally recommended. So you have to go really slow and understand when to reduce the nitrogen. Better to prepare the soil with fertilizers to mix with the soil probably. The problem is sweeping now that it is going into flowering, the plant has shown the first fluff, declared the sex, and the fertilizer will soon be needed indeed. You have to inflate. In any case everything is under control and I will demonstrate it to you during the flowering phase. Wait for the Uncle BreadandBuds and see what he does. Remember that cold temperatures make the girls absorb food much more slowly than in summer, so be careful to give the right amount and let the plant dry in maximum 2 days or you risk imbalances. We are always using soil, feeding and all the recommended additives of Plagron 100& organic, we have only lowered the amount of grow in this topping phase for the reasons mentioned above. ---- Decide on the right soil and calculate your fertilizer sheet based on the soil on the official website. -- www.plagron.com Try a seed of this variety that drives us crazy.. ---- https://www.zamnesia.io/en/11230-zamnesia-seeds-rainbow-sherbet-automatic.html Zamnesia Description //A cross between Pink Guava, Sunset Sherbet and a hint of ruderalis, Rainbow Sherbet Auto offers a wide range of flavors, effects and more. This 70% indica-dominant strain reaches considerable THC levels (24%) and is suitable for both experienced growers and those taking their first steps in the world of cannabis cultivation. All the best that mother nature has to offer is on ---- www.zamnesia.com Translate

Nicole está a la altura de ser una planta de extracción

I spend less time with them my friend usually look after them. She went on holiday so I will be with them lucky ones. They are okay big plants flowering nicely I constantly removing old yellow leafs. All the same they do well :).

For LIQUIDS & Nutes ******GREEN BUZZ NUTRIENTS***** organic. Also i’m using their LIVING SOIL CULTURE in powder form! MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W 💨MARSHYDRO 6” in-line EXTRACTOR with speed-variation knob, comes complete with ducting and carbon filter.

Harvest done, a few days drying and then up for weeks of curing.

Same old same ol

De nuevo, actualizamos la séptima semana de floración y es que estas skunk están preciosas, es una Indica muy conocida y típica entre nosotros los cultivadores, muy sencilla de cultivar. El ph, la humedad y la temperatura son correctos, zambezaseeds está haciendo muy buen trabajo con sus variedades gente, os lo aseguro que ya son varios los cultivos con ellos. Hasta la semana que viene.

Amazing Plant!!!...

day 71 she is putting on weight even with all the burned leaves I believe Jeff123fish is right about the soil being toxic - the run off had about 1000ppms but the pH was good and I think the light distance was a little close and just accelerated the already damaged leaves. I flushed and raised the lights some. She smells like skittles and I think she will pull thru just fine.

So that’s the end of week 3 and starting week of week 4 , this week has been a roller coaster as you can see the plants have took a bit of a beating I think it’s due to lack of nute as I though I was over feeding but turns out I’m not watering enough but the new growth looks amazing so hopefully everything will be okay now

This is a amazing autoflower. She grew very well under the Medic Grow Mini Sun-2. She has some big huge colas on her. She smells great, and has a great frosty resin over her. I didn't have any major issues during the grow. looks like a excellent auto, and I am gear to test her. Thank you Medic Grow, and Seedsman. 🤜🏻🤛🏻🌱🌱🌱 https://www.seedsman.com/?a_aid=Mrsour420. This is my affiliate link to seedsman. Thank you Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

On day 1 the rez is at 6.2. The highest cola is 8.5" from the light. On day 2 the rez is at 6.2. The highest cola is 7.75" from the light. On day 3 the rez is at 6.1. The highest cola is 7.5" from the light. On day 4 the rez is at 6.3. The highest cola is 7.125" from the light. On day 5 the plants are smelling and doing well. On day 6 I changed out the rez and PH to 6.1. The highest cola is 7" from grow light stretch is deff slowing down and should be over shortly. My avg PPFD at canopy is around 800. On day 7 the rez ph is 6.0. The highest cola is still 7" away from light 😅 close but not too close in my small space.

Strain: Fast Buds – Gorilla Melon Grow Type: Indoor Pot Size: 5 Gallon Medium: Peat Moss & Perlite Nutrient Line: Athena (Bloom) Week 7 Update She is such a beautiful plant I really outdid myself with this 8-manifold. Her structure is everything I was hoping for! She shot up nicely during this first week of flowering and looks strong all around. No deficiencies or signs of stress she’s taking her nutrients perfectly. I’ll be clipping any big fan leaves that block bud sites we’re looooooking for full coverage 😎. Feeding 1.9 L Athena Bloom nutrient mix (steady from this point). Indoor Climate Conditions Temperature: 18–26°C Humidity: 45–55% VPD: ~1.3–1.8 kPa See y’all next week! And don’t forget to use my discount code ISLANDT for 15% off your next order at Fast Buds!

Looking good training main stems down to second ones .

June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.

Didn't stretch as much as she might have done which suits me. On target for plenty of compact buds. Taking the Shogun coco nutrient range like a champ. Only issue I've had is having to defoliate more times than I'd like.

Blütewoche 4 – Volle Expansion unter Druck In der vierten Blütewoche gehen die Pflanzen endgültig in den vollen Ausbau. Die Struktur verdichtet sich sichtbar, neue Kelche schieben konstant nach und die Harzproduktion nimmt deutlich Fahrt auf. Die Luftfeuchtigkeit wird konsequent bei 60 % gehalten, damit die Raubmilben optimale Bedingungen haben und ihren Job effektiv erledigen können. Das IPM-Management läuft stabil und präventiv. Trotz kontrollierter Parameter schießt die Pflanze weiter in die Höhe. Die zwei obersten Hauptstränge befinden sich inzwischen nur noch knapp 14 cm unter der Lampe, was bei genau diesen beiden Tops zu leicht aufgehellten, fast albinoartigen Spitzen führt. Interessanterweise zeigen die Buds etwa 20 cm darunter keinerlei Stress und vertragen die maximale PPFD problemlos. Das Lichtmanagement funktioniert also grundsätzlich – nur die absoluten Tops bekommen aktuell die volle Intensität ab. Die Pflanzen befinden sich klar im „Stacking Mode“. Die Budsites verdichten sich, die Zuckerblätter überziehen sich zunehmend mit Trichomen und die Struktur wird kompakter. Aromatisch beginnt sich bereits jetzt ein sehr klares Profil zu zeigen – ähnlich wie beim vorherigen Clone: 🌲 Waldig 🍏 Apfel 🌰 mit einer warmen Zimtnote Die Terpene breiten sich früh und intensiv aus. Ein sehr gutes Zeichen für die kommenden Wochen. Die Richtung stimmt – jetzt heißt es Stabilität halten und den Fokus auf sauberen Blütenaufbau legen. EN: Flower Week 4 – Full Expansion Under Pressure In week four of flowering the plants have fully entered their expansion phase. The structure is visibly tightening, new calyxes are stacking consistently, and resin production is clearly accelerating. Humidity is kept consistently at 60% to provide optimal conditions for the predatory mites so they can effectively do their job. The IPM strategy remains stable and preventive. Despite controlled environmental parameters, the plant continues stretching aggressively. The two upper main tops are now only about 14 cm below the lamp, which has resulted in slightly bleached, almost albino-looking tips — but only on those two highest buds. Interestingly, the buds located roughly 20 cm lower show zero signs of stress and handle maximum PPFD without any issues. Light management is fundamentally on point — only the very top colas are currently receiving the most intense exposure. The plants are clearly in full stacking mode. Bud sites are tightening up, sugar leaves are increasingly covered in trichomes, and overall structure is becoming denser. Aroma development is already pronounced and very expressive — similar to the previous clone: 🌲 Forest-like 🍏 Apple 🌰 with a warm cinnamon undertone Terpenes are spreading early and intensely, which is a very promising sign for the upcoming weeks. The direction is right — now it's about maintaining stability and channeling energy into clean bud development.