The stretch phase is officially over, and now the plant is shifting its energy toward trichome production!🌱 I’ve started noticing a light scent developing, though it’s still not very intense yet. I expect that to change in the coming weeks. I did a light defoliation to improve airflow and light penetration, and I plan to do another round in about two weeks. Interestingly, the fan leaves are starting to take on a slight reddish hue—curious to see how that develops! 💪😊 So far, everything is looking great, and I’m excited to watch the buds bulk up in the next phase!

Flowering has been an uphill battle against high humidity. Close to the end though. I can't wait I've been watching so many videos and been reading on forums from this point, harvesting, drying and curing. Still looks like itll be a while before smoking. But anyway this has been a great new experience.

Other wedding glue has been chopped. Last one here, slowly it is maturing compared to the others. Solo cup grow started. Will start a diary on those as well. Wedding glue auto by fastbuds is a truly amazing strain. One of my favorites

Start week 7 , Bio Grow 2 ml/L + Bio Bloom 4 ml/L + Sensi Cal-Mag Xtra 2 ml/L + CarboLoad 2 ml/L + Top Max 4 ml/L (Ph 6.7).

I loved every min of her. Shes is hanging to dry and will be trimmed and weighted as she dries. Cant wait to smoke her. She was so heavy in the end she needed yo yo hangers to have her supported under all her weight. I would love the chance to grow her again. Oh my god she is sooo heavy like wow i cant even with her. The rosin she produced is just fire. Lemons and vanilla and so heavy. I would grow her a million times over.

10-18 She hasnt even acted like I bent her top! Recovered nicely. Her buds have turned upwards to welcome the light! 😁 10-19 Water, noticed some slight burn, will flush her next day or so. She looks pretty good other. Spaced some branches just just a tad. Cleanin up, while she fattens! Has a minty smell. I know Im rough, very grateful for these beans Weedseedsexpress!💚😻 Ill get my shit together! 💪🤘 .

Starting to Low Stress Training and super cropping some secondaries

She’s recovered from defoliation and buds are everywhere. THe tent is smelling great. Almost to the halfway point in flowering. Getting excited to see her swell.

And it starts like this. an official collaboration starts with the friends of Zamnesia, from today I will only grow, grow and flower Zamnesia Seeds plants and I really like it. We are close to a flowering in the extreme heat and therefore we opted to start with 4 very fast F1s, they are not joking guys when they tell you that they are made to be more resistant, stable and fast they are not telling you something false. The girls are super fast, even those from other brands tried in the past are excellent and a sliver and this one from Zamnesia have all it takes to be the best autoflowering on the market. The Wurlz F1s were also born at the speed of light, 18 hours in water, 24 on land and we were already born, both of us. Oh yes, a lot of research is being done on autoflowering plants, you have all noticed monstrous improvements compared to Low Rider and subsequent derivatives. Whoever works best wins and from what I have been able to see so far Zamnesia is working very well. I know, there is a group of sceptics, friends I'm here on purpose, give me a couple of months and we'll see. Zamnesia is the best online shop in the situation, you can find everything from seeds, to mushroom kits, through vaporizers and a thousand other things https://www.zamnesia.io Wurlz F1 seeds specifically https://www.zamnesia.com/10669-zamnesia-seeds-wurlz-f1-automatic.html Site Description ZAMNESIA SEEDS - WURLZ F1 HYBRID AUTOMATIC: EFFECTS TO LEAVE YOUR HEAD IN A WHIRL! As the end product of combining Runtz with Watermelon Candy, Wurlz F1 hybrid Automatic showcases a reliable, uniform, and, above all, easy growing experience. The resulting buds offer mind-blowing flavors and soothing effects, making Wurlz F1 Automatic more than worthy of being on your radar. GROWING WURLZ F1 HYBRID AUTOMATIC As an autoflowering strain, it takes just 9–10 weeks for Wurlz F1 Automatic to move from germination to harvest. Fortunately, there's very little required other than a bit of maintenance along the way. This is partly due to the F1 genetics that make this strain robust and uniform, resulting in plants that reach a similar height and provide a similar (large) yield. Moreover, Wurlz F1 Automatic is highly resistant to disease, pests, and other ailments. Reaching heights of about 65–80cm, Wurlz F1 Automatic is not an overbearing plant and can fit into smaller spaces with zero fuss. Once ready to yield, growers have the potential to see a return in the region of 450–500g/m² indoors and 50–150g/plant outdoors. AROMAS, FLAVORS, AND EFFECTS OF WURLZ F1 HYBRID AUTOMATIC After Wurlz F1 Hybrid Automatic wows you with its easygoing growing experience, the best is yet to come: the smoke test. Teeming with terpenes, this cultivar offers a fruity and candy-like flavor tinged with just a little bit of pine for good measure. In terms of effects, Wurlz F1 Automatic is bolstered by 24% THC and a finely tuned array of cannabinoids, making for a soothing, physically relaxing, and, in larger amounts, couch-locking high. So settle in with some of your favorite friends, snacks, and movies; this is relaxation at its finest.

8. Woche Läuft soweit gut, Z-Up ist aktiv am Bloom produzieren 😊

May 26 2026 She's been repotted into a 5 gallon grow bag, and that will serve as her home for the remainder of the grow. The soil in the bottom half is pro-mix all purpose, and the top half is a combination of coco coir, perlite, worm castings, biochar, blood meal, bone meal, Epsom salts, and a bit of cal-mag. She's making a lot of progress health-wise, and by next week she should look completely normal. I did remove a some lower fan leaves, as they were no longer of any use. ---------- On a side note: I had originally ordered 10 purple dragon ball F5 seeds from 7East, but they only sent me 6 due to lack of inventory and substituted with a generous amount of Watermelon Dragon seeds, which I'm fine with since I had intended to order those sometime in the future anyway. That said, of those 6 purple dragon ball seeds, there were 5 that initially cracked open but the inside of the seed was rotten. The sole surviving seed germinated properly, and while these are regular seeds and could be male or female, I'm confident this one is a female based on physical characteristics and a lack of pre-flower development on the 4th node. In rare cases I've seen males develop their first pre-flowers on the 5th node, but in those cases they ended up being male herms. Fingers crossed that doesn't happen here, but the only way to find out is to wait. ⏳

Week 14 Day 92 | 22/07/2022: No time today Day 93 | 23/07/2022: Watered the girls today with just 1.5L of water. The temperatures have dropped thankfully so it's not too hot for them now Day 94 | 24/07/2022: So many trichomes on these girls, the buds are looking white! Just a few days left! Day 95 | 25/07/2022: The trichomes are looking amazing on these girls! Shame they won't be able to get to their full potential since most of the hairs are still white and the trichomes are still mostly cloudy, but I am really looking forward to trying them! They smell like a fruit juice or something :D Also I decided not to water them anymore so they can dry up a bit before harvest in 3 days! Day 96 | 26/07/2022: Day 97 | 27/07/2022: Day 98 | 28/07/2022: Today was the big day! (for the girls and for myself) So the only thing I did was tidied up the foliage by removing all the fan leaves, cutting the girls at the base and handing them in the tent. I find that the remaining leaves really help keep the moisture at a higher level and they tend to smell less like hay. I will be leaving the girls to dry for about 10 days, and then I always put them into glass jars to cure! I really wish I could have kept these girls growing just for another week because most of their hairs are still white, but unfortunately i had no choice and this is still more than good enough. Let's hope the genetics make up for it in the smoke!

This was a brilliant plant, it kinda stunted a little bit, but that was my fault. It was so beautiful during flower, and the smell is not like weed at all, but more like juicy fruit chewing gum. Amazing and smooth to smoke as well.

6/19/2024 this plant is short and stinky as fuck even as a cutting. Excited for this next run I'm doing. The last clones from this nursery, were the rs11 and purple octane and those were phenomenal. Let's see where this goes yall 6/25 been staring at her trying to envision how to go about training or topping. She's short and the lower branches are fairly prominent and reaching close to main stem. I will probably Top her after she starts growing regularly and gives me some more to work with.

# Journal de Culture Cannabis - Eternity Grow Cup 2 (Zamnesia x Plagron) 2026 **Grower :** @Sadhusfrgrow **Localisation :** Luxembourg **Strain :** Sticky Broccoli (Zamnesia Seeds) - Féminisée **Description de la variété :** Sticky Broccoli est une variété indica dominante (90 %), avec un THC à 23 %. Elle présente des arômes sucrés, épicés et floraux persistants, des plantes compactes et résineuses, idéales pour des rendements élevés en culture contrôlée. **Setup général :** - Substrat : 100 % coco Plagron, offrant un drainage supérieur et une oxygénation racinaire. - Pots : Définitifs de 5 litres, pour un développement racinaire sans contrainte. - Irrigation : Automatique Netafim Drip (Netadrip), cycles de 2 minutes par heure × 14 (soit ~200-250 ml/shot, ajusté pour ~6-8 % humidité substrat), suivis d'un dry back de 15 % pour promouvoir la santé racinaire. - Contrôle : TrolMaster full setup pour une automatisation complète (voir présentation ci-dessous), incluant climatisation, humidificateur/déshumidificateur, chauffage, extracteur/intractor d'air, ventilateur, pompe à eau, chauffe-eau avec bulleur et agitateur, pompe à eau usée, table de drain DIY, et barre UV/IR pour spectre étendu. - Nutrition : Plagron Coco (A&B, Power Roots, Pure Zym, Green Sensation). EC tank 2,0-2,5 mS/cm, pH 5,8 stable. - Éclairage : Cycle 18/6 végétatif, hauteur lampe 80 cm, imitation lever/coucher de soleil + 30 min IR chevauchant les lumières principales ; PPFD ~550, DLI ~35 mol/m²/jour. - Objectif : Préparer le switch à 12/12 dans quelques jours pour floraison, avec clonage pour préservation génétique. - Mises à jour : 2 plantes robustes ; LST relâché pour permettre une expansion naturelle, défoliation et FIM maintenus pour structure buissonnante. Présentation du setup TrolMaster : Le système intègre une climatisation pour régulation thermique précise, un humidificateur/déshumidificateur pour VPD stable, un chauffage d'appoint, un extracteur/intractor pour renouvellement d'air (taux CO2 cible 900 ppm), un ventilateur pour circulation, une pompe à eau avec chauffe-eau, bulleur (oxygénation) et agitateur (homogénéisation nutriments), une pompe à eau usée pour évacuation automatique, une table de drain DIY pour collecte runoff, et une barre UV/IR pour booster résine et terpènes. Photos jointes montrent le dashboard et graphs pour monitoring en temps réel. ## Semaine 4 : Croissance Végétative Avancée (8-14 février 2026) ### Contexte et Objectifs de la Semaine Cette semaine marque la fin de la phase végétative intensive, avec préparation au switch 12/12 prévu dans quelques jours. Nutrition Plagron poussée à EC 2,0-2,5 (Cocos A&B 2,5-3 ml/L, additifs stables) pour soutenir la biomasse accrue, pH tank maintenu à 5,8. Irrigation affinée : Cycles de 2 min/h × 14 (total ~2,8-3,5 L/pot/jour), dry back 15 % pour oxygénation et prévention des pathologies racinaires. Éclairage optimisé pour DLI élevé, favorisant une photosynthèse maximale sans stress. Techniques : Défoliation sélective (retrait de feuilles ombrageantes pour aération), FIM pour multiplier colas, LST relâché (attaches assouplies pour croissance naturelle tout en maintenant canopée plate). Clonage planned pour préserver phénotypes potentiellement élites. Objectifs : Maximiser la vigueur pré-flo, avec grosse défoliation à venir (retrait tout en dessous du 1er treillis pour concentrer énergie sur buds supérieurs). EC/pH runoff légèrement inférieurs à l'input, indiquant absorption efficace sans accumulations. ### Observations des Plantes - **Jour 22-24 (8-10 février) :** Plantes vigoureuses, envergure ~40-45 cm, hauteur bridée à 18-20 cm par treillis. Défoliation mineure et FIM confirmés ; LST relâché pour permettre extension latérale sans contrainte excessive. Racines denses et blanches (inspection via pot transparent). EC runoff 1,8-2,2 (légèrement input), pH 5,7-5,9 stable. Irrigation : 14 shots/jour, dry back 15 % mesuré (moist descend à ~60 % avant recharge). Pas de signes de stress ; feuilles vertes profondes, envergure 18-20 cm. - **Jour 25-26 (11-12 février) :** Croissance explosive ; structure à 6-7 nœuds, branches secondaires robustes grâce au FIM. Relâchement LST complet pour préparation flo ; défoliation supplémentaire pour pénétration lumineuse. Clonage initié au jour 25 : Boutures apicales prélevées, placées en propagateur avec Power Roots. VPD stable, favorisant transpiration saine. Runoff analyse : EC légèrement inférieur (absorption NPK optimale), pH stable sans drift. - **Jour 27-28 (13-14 février) :** Plantes prêtes pour switch ; envergure 45-50 cm, hauteur 20 cm. Dernière défoliation légère ; tout est sain, sans pests ou carences. Plans pour grosse défoliation post-switch : Retrait feuilles/banches sous treillis pour focus sur tops. Clones enracinés ~20 %, à monitorer. ### Paramètres Environnementaux (Analyse des Données TrolMaster) Basé sur captures TrolMaster pour "Coco Test" (moyennes semaine 4, jours 22-28) et dashboard live (15/02/2026), avec graphs montrant tendances stables sur 24h/semaine. Graphs indiquent fluctuations contrôlées : Temp/Hum stable avec pics mineurs, VPD constant, Light cyclique (jour/nuit), pH/EC solution sans spikes majeurs, moist moyenne 75 % avec dry backs visibles. CO2 non mesuré (ambiant ~400-500 ppm ; cible 900 non atteinte). Augmentation PPFD pour DLI cible 35. - **Température (°C) :** - Moyenne Jour : 25,2 °C (dashboard 25,8, cible 26 pour veg fin). - Moyenne Nuit : 23,1 °C. - Max Jour : 26,5 °C ; Max Nuit : 24,3 °C. - Min Jour : 22,8 °C ; Min Nuit : 21,7 °C. Stabilité : Variations

Obama runtz x gas tax sad to say both seedlings are super crappy so far. If it was not for the gas tax parent being the best flower ever then I wld just toss these but sometimes the crappy slow growing plants end up being super dank It's looking like a good start to a week the plants are strong they are getting to the point I can let the dried dry out completely. I'm thinking by the end of this week the plants will be starting to be sold. Last week I put all the plants into my bigger 2x4 tent with my medicgrow mini sun 2 the 500w version. Only a few of the plants were ready for that light. Seems like the only plants that really have good resistance and have a strong start are the weedseedsexpress.com seeds. Shout out to weedseedsexpress.com for the strong plants. I ended up putting all the plants back into my 2x2 tent with the 55w amazon light it has alot more blue light in its spectrum. It's kinda weird b4 I switched the plants to the 2x4 tent they were getting 220umol under my amazon 55w led then when I put them under the 500w light 25% strength about 50in from plants and they were getting only about 195umol in that tent but it was stressing most the plants. I assume a larger light has more side lighting hitting the plants. I think when useing larger lights it's good to measure umols from the top but also coming from the sides. I think durring seedling stage they only need about 50% the umols coming from the side the plants as the top is receiving. When I put the plants back in the small tent about the same umols as they were getting b4 the switch and they were still a little stressed. So for a few days I put the small light at the top the tent giving them 100umols for a few hrs then 130umols the rest the day.

After 4 days of heavy rain, the first mold appeared... So I spent about 18 hours searching for plants and picking out mold with tweezers After last year's experience with another seed bank, I expected the plants to be very affected by mold, but I have to say that Fast Buds genetics coped very well! Mold appear mainly on blisters to which the stem of the leaf leads water, which then collects between the stem and the blister I trimmed the plants more so that the air flows better and that water does not stick to them The plants look healthy and the flowers are gaining strength Especially the dark purple phenotypes look very dense and hard. it also looks very resistant to mold Very pleasant sweet fruity scent I haven't seen my children for 3 days, it's raining extremely ... the last time I was chased out by swarms of ants in the early evening, I've never experienced this before, there were maybe a million of them and they sat on me and on the plants I'm finally going to visit them tomorrow, I expect I'll have a lot of work to do with mold and I hope the swarms of ants haven't harmed them in any way

Hey all! 👋 Remember last week when I said Falco was getting some chlorosis? Well, the first photos show how bad it is (or was) but the plant is "old", she was quite special as a young plant and her main leaves are doing well so I suppose what is happening is just something normal or maybe some other weird factor... might be affecting her, but more probably I'm just way too worried. In my confusion I added 2ml of Green Grow (which is the growing fertilizer I previously used) thinking that she needed the extra nitrogen but in the end it seems it was unnecessary (as it's a normal process of the plant), I just removed the old leaves and left her to be. 😝 Besides what I previously said I saw a lot of bud progress this week (and I tried to picture all that! 😋). There are plenty photos of the same flower (most of the times!) showing how trichomes were constantly appearing during this week. Next week I'll be adding some extra Potassium and Phosphorus and I hope those products will help my babies to get bigger buds! I also made a video at the end of the week to show how my plants look at a normal speed plus two time-lapses. There are also some photos I took with my DSLR and an inverse ring just to see how the plant would look... and I think they look amazing! 😍 Anyway, I hope you all like the photos and thanks for reading! 👋