Processing
Likes
Comments
Share
@
Follow
Likes
16
Share
This strain give us a highest yield so far with 924g of dry buds after trimming and ready to be cured. And this pheno is pretty strong, it grows super fast, and have a very strong smell of jackfruit.
Likes
14
Share
EVERYTHING IS HARVESTED NOW AND TRIMMING LIKE A MANIAC. STAY TUNED FOR THE NEXT BIG GROW. THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 https://strivenutrients.com/ Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍
Processing
Likes
14
Share
Likes
6
Share
The girls are loving their new home and enjoying the heatwave we are experiencing here in Ontario. There was a big rainfall yesterday to break the heat so that was nice treat. I did spray them with a neem oil soapy mixture as I found a few bugs on the underleaves. Could have been aphids but I'm not 100% sure. Also found a few leaves that were munched on by Japanese Beatles. I've gotten rid of 2 of those Beatles already but seems to be the time of the season as they are all over my veggie garden too. I'll probably move them closer to my garden beds next to some companion plants. Maybe it'll help with the bugs.
Likes
20
Share
@RonnieB
Follow
I wish I had better lights. These are cheap ts600 and par600 The last week i did major pruning of lower shaded popcorn buds, skinny stringy branches. Tied outter buds towards more lighting and have cut water and nutrients back. Ive found that if you let a plant get on the drier side. That it'll give you more frost, better flavor, and larger colas. This method comes from fine wine makers who force not so optimal conditions onto their vines. This in turn causes the plant to work harder and focused more on bud than growing new fan leaves. Cannabis plants biggest goal is to get a cola in to the air as high as it can in hopes to get a pollinating creatures attention. If you manipulate this you can force the plant to make better buds. Because theres a chance the plant senses danger because of the watering routine changing
Likes
22
Share
@DevelGrow
Follow
Hallo Freunde des grünen Daumens 👋🍀✌️ die Kleinen sind 14 Tage alt! Und legen einen schönen Start hin. Es Entwickeln sich die ersten Triebe und bin erstaunt wie schnell sie wachsen! Temperatur und Luftfeuchtigkeit liegen stabil in den Werten,im ganzen ein sehr entspanntes Gewächs die Version A ! Schauen wir Mal gespannt weiter wie Sie sich entwickeltn! Allen einen schönen Grow and keep Green 🍀👋
Likes
9
Share
The purple punch which suffered light stretch is yellowing, the stems are thin comparing to the other purple punch. What surprises me is the fact the yellowing plant forming colorful purple colors I cant wait to see the bud formation because this 2 grows are fully organic.
Likes
16
Share
28 días de mis hermosas nenas... A una semana lo más probable las pasare a florar!!!
Likes
24
Share
Living da coco life Week 6 🌿 Check Out My Cannabis Community! 🌿 👇 Like, Follow, Comment, and Subscribe to My YouTube Channel 👇 ❄️🌱🍻 DutchF4rmer on YouTube (https://www.youtube.com/@DutchF4rmer) ---------------------------------------------------------- 🎁 Join Our Discord Community for Weekly Giveaways! 🎁 👉 Join Our Discord Server (https://discord.gg/VMu6rH4a7V) ---------------------------------------------------------- 🌟 Get Exclusive Help, Advice, and Mentoring on Patreon! 🌟 👉 Join Our Patreon. (https://www.patreon.com/DutchFarmer) ---------------------------------------------------------- 📸 Follow Me on Instagram 📸 👉 DutchFarmer1 on Instagram (https://www.instagram.com/dutchfarmer1)
Likes
26
Share
@darb35
Follow
Day 78 - No Water (93-100 cm) Day 79 - 1L Water (ph 6.4)(93-100 cm) Day 80 - No Water (93-100 cm) Day 81 - 1L Water (ph 6.4)(93-100 cm) Day 82 - 800 ml Water (ph 6.4)(93-100 cm) Day 83 - Harvest time for plants 1&2, plant 3 will stay in for a few more days Day 84 - No Water Maybe last week? Thinking of harvesting this weekend. Maybe plant number 3 will wait a bit longer? They all smell amazing and a bit different than each other 😍
Likes
14
Share
Beginning week 6 of flower, gettin loud in there, tropical pineapple with lotsa GAS. Still tryin to dial in the jacks 321 have some slight burning goin on, ppms we’re almost 2000 flushed again got the medium down to 850. 7-800 seems to be the sweet spot for these girls still not likin a lot of food
Likes
14
Share
churning along. very spread out through multiple rounds of LST. this would grow quite tall if allowed.
Likes
16
Share
@DonKrika
Follow
I still have problems with high levels of humidity, but I discovered that if I open the window of the room to let fresh air in I can reduce the humidity in the air. This week I introduced molasses in the water, I used 1 tablespoon for every 4L of water. From now on I will only use nutes and molasses. The buds are not huge, but they are full of trichomes. I saw a bit of nutrient burn on a few leaves, nothing to worry about, I guess PPM around 2000 is a bit too much for this strain. DAY 108 PH - 6.01 Solution Temp - 17.3 PPM-2150 Watering Volume per plant - 4L DAY 112 - Molasses PH - 6 Solution Temp - 19 PPM-610 Watering Volume per plant - 4L
Likes
15
Share
@Dunk_Junk
Follow
Wow well she has jumped up!! A week ago I scraped off a couple of inches of the soil/perlite mix and replaced it with brand new compost. My grows for the last few months have been unimpressive to say the least and I've been trying to figure out the problem. I've had a few theories but the one I've settled on is my soil. I think I need to change it much more often than I have been doing previously.
Likes
1
Share
This is still week 7 but a couple days after last weeks pictures. The Photos haven’t fully flipped to flower but are showing clear signs. Really pleased with Somango and BCP but I’m not really liking the way LSD is growing. Doesn’t have an abundance of leaves and is growing really long Branches. We’ll see how that goes in Flower, I hope it’s not going to turn in to a lot of Space and/or humidity Problems.
Likes
25
Share
week intel: its time to harvest top buds! because my base nutrients and one of boosters was salt based, i'll do flushing this week to get some relieve to plants in the last days stresses : flushing Drought stress via watering only one time with flushing this week feeding: day 1 : i flushed them with Advanced Nutrients Flawless finish and adjusted ph day 3 : no more feeding from now on day 5 : no more feeding from now on guide of the week : i harvest in 2 parts : first i harvest top of the branches and will let the lower buds to ripe another week then ill harvest the second wave. its crucial to get uniformed buds in terms of quality that you let the lower buds to get some extra air and especially light! then the pop corn buds quality will reach the top buds. my dry and cure style is this: 3 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 3 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. im happy as hell with this harvest :D.
Processing
Likes
17
Share
@greennug
Follow
they are all thriving, growing exactly as i want them to. sucking up everything i give them and they are on daily feeds. some of the autos are starting to flower, but im gonna stretch out veg for atleast another 4/5days for photoperiods. they are ranging in height between 45 and 75cm. west coast OG auto from fastbuds been the tallest at the mo. dinafem cookie strains showing preflowers now and everything going fine. no problems as of yet in the slightest. daily updates.