These girls are still perfect. You want a picture perfect set of plants and it's these they are all damn identical i am still blown away by how close they are from growing from seed! The only real diffrnce is 1 has slightly wider smaller leafs so more leaned indica hybrid but all the spacing between the 4 are about the same. They have been receiving about 500ml of food/ water about every 3 days with the ph at 5.6-5.7. Will top these girls soon to get a couple heads started just didn't want to end the symmetry. Still no smell or sign of preflower yet, with a stem rub they feel sticky to touch and only smell green so just tells me they healthy. Soon a smell will come along! Peace be with you!

Everything is movin along some will be coming down this week a few need a little longer. I'll get some pics up a little later today. This one was stunted early but has some pretty nice nugs on it. Just started the flush

First put them in a cup of water then paper towel

DID SOME MAJOR DEFOLIATION TO SLOW THE GROWTH ABIT. IM GOING TO PUT THE 15 PHOTOPERIODS IN THE 8X8 TENT TO FLOWER BUT I NEED TO HARVEST THE AUTOFLOWERS FIRST. FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Great grow excellent quality. Probably gonna end up keeping #2 since she was an absolute best but won’t know until she’s cured

Hello my friends 👨‍🌾👩‍🌾, This week I've continued my training, Removed several leaves making shadow, I'll continue to remove leaves and next week. Today I've transplanted the ladies in 11l pot with plagron batmix. I've given 600 ml/plants 2 times. After transplanted 1.2l/plants Start week, mid week, today 1x water + tera vega + boost 1x water + cannazym 1x water + rhizo PH@6 Starting 12 12 next week, last growth week! Not yet found the bugs, maybe removed in same time than leaves, because not too much damage this end week. Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Also to @marshydrococo2 , @News_SweetSeeds for sponsoring 💕💕. Mars Hydro TS 1000 https://www.mars-hydro.com/ts-1000-led-grow-light Gorilla Girl F1 fast version https://sweetseeds.es/en/photoperiod-dependent-seeds/3065-gorilla-girl-f1-fast-version.html See you next week my friends Have a good week end 😁💕

4ème semaine de floraison. Cette dame ce porte a merveille ☠️☠️💀 irrigation tous les 3 jours environ 6L, 12L/Semaine.

im starting to have concerns about this plant. she's been growing slow but in the same cycle as the Pineapple Glue.

Week 6 Report: White OG – Shaping Her Future 🌟 We’re at Week 6 of veg, and the White OG is thriving like a superstar! This week, I decided to take her structure to the next level by topping a few branches, and let me tell you—she’s loving it. 🌿 The growth is vigorous, and she’s shaping up beautifully to maximize her potential for flowering. Let’s dive into what went down this week and why it’s all so important for her journey. Branch Topping: Building a Strong Framework After recovering beautifully from her initial topping at node 7, it was time to refine her structure further by topping a few branches. For each branch, I left two nodes to ensure strong, healthy growth while encouraging a bushier canopy. Why Top Branches? Topping isn’t just for the main stem—it’s an essential technique for creating an even canopy and increasing yield potential: 1. Encourages Lateral Growth: By removing the top of a branch, the plant redirects its energy into the remaining nodes, encouraging side shoots to grow and fill out. 2. Maximizes Light Penetration: A bushier plant with more branches ensures that all parts of the plant get access to light, reducing shading and improving photosynthesis. 3. Improves Structure: A strong, evenly distributed framework sets the stage for a healthier plant that can support larger buds during flowering. The decision to leave two nodes per topped branch ensures a balance between promoting growth and avoiding unnecessary stress. Tent Conditions: Consistency is Key The room conditions this week have remained steady and perfect for her vegetative stage: • Temperature: Around 18°C—cool but manageable, keeping her growth steady. • Humidity: At 60%, maintaining just the right level to support her root zone and foliage. • Lighting: The Future of Grow (FOG) LED at 200 PPFD continues to provide optimal light for compact, strong growth. i will dim it up soon! These consistent conditions give her the environment she needs to recover quickly from topping and focus on building her structure. Nutrient Routine: Trusting the Pellets This week, I’ve continued with the Aptus Holland All-in-One Pellets as the primary nutrient source. They’re working their magic, providing a steady release of nutrients to support her vigorous growth. As a backup plan, I’m always ready to reintroduce All-in-One Liquid if she starts showing signs of needing more immediate nutrition. For now, she’s thriving, and the pellets are doing an excellent job of meeting her needs. Training and Future Plans Topping a few branches this week was just the beginning. I’m planning to continue topping over the next few weeks to shape her into a bushy, evenly distributed plant. By focusing on creating a strong structure now, she’ll be perfectly prepared for explosive growth when we flip her into flowering. Looking Ahead: Growth on Overdrive 🚀 As Week 7 approaches, I’ll be monitoring how she responds to the additional topping and ensuring her environment stays consistent. The goal is to encourage her lateral growth while keeping her stress levels low and her energy focused. A huge thank you to the incredible brands and community that make this journey so rewarding: • Seedsman Seeds for the top-tier genetics—don’t forget to use the DOGDOCTOR 10% off discount code! • Aptus Holland for their game-changing nutrient solutions. • Pro-Mix Soil for the perfect foundation with their HP Mycorrhizae + Bacillus blend. • TrolMaster for helping me maintain the perfect environment. • Future of Grow LED for reliable, efficient lighting. • Cannakan for kickstarting this journey during germination. • Grow Diaries for being the platform where we share, connect, and learn together. To all my followers, lovers, haters, and everyone in the community—you’re the heart and soul of this journey! 🌟 Bonus Content: New Episodes Weekly on YouTube! 🎥 Don’t forget to check out my YouTube channel for weekly episodes with tips, tricks, and behind-the-scenes action. Links are in the profile—come join the fun! Growers Love! 💚 DISCOUNT CODE - SeedsmanSeeds - DOGDOCTOR 10% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚

 Friendly reminder all you see here is pure research and for educational purposes only 💚Growers Love To you All and remember to keep that smile big and alive 💚

This week's been real fun seeing alot of purple coming in slow leaves are turning very purple I ditched the blurple light... it was good for supplemental lighting bit it started burning the tops a bit ... however I have 2 of the exact same plants strains are same ingrow both exact same and one is a green pheno looks scraggly and the left one is the ourple phenonwhich looks absolutely stunning they are like day and night crazy cause I have done nothing different with each and the ammount of issues from right to left plant have been drastic . Lots of purple on the tip calyxes' ! And the bottom of the nugs are very sticky smelly and very very fruity I cannot wait to chose this lady, trim cure going to be so much fun...

JOANNE'S CBD / ROYAL QUEEN SEEDS WEEK #15 OVERALL WEEK #3 FLOWER This week all 👍 good no issues to report she's looking good nice and green she's doing her thing 👌 buds are starting to form nicely!! Stay Growing!! Thank you for stopping by and taking a look it's much appreciated!! THANK YOU ROYAL QUEEN SEEDS!! BUDTRAINER.COM BUD CLIPS

To clarify I'm using the OG Oganics Nirvana as the regular isn't OMRI approved. Long story short the plant is loud, I moved it into a 2X2 for some special attention under a growcraft x3 mini and doing well

Well, that day has come, the girl would have been really different if not for the high temperature, strong light, and a huge lack of potassium :( well, everything will be fine next time :) live and learn :) I am satisfied with the result, which is what I need :) got 200 gr of liquid :) gathered a lot of sugar leaf :) they are already in the sweet shop :D I will make an addition!! good growth and success :)

Well, marking the first week of flower. Lots of pistils, flower has begun. Just wildly hot weather, 33c days, full sun every day, we've had 6mm of rain in 2 months, average rainfall for June / July should be 60mm. As much as I love the weather, climate change / water scarcity worries me. Luckily we have a good clean glacier fed reservoir with strict water restrictions in summer. Made a compost tea in 5g bucket, compost, molasses, kelp, Epsom, some coir, and aerate for 24hrs. Removed some inner nodes not catching up to the cannopy, and some lst clips for the tallest nodes. Cannopy is looking really great and FLAT! Drones the only way I can get up there to see, must be pushing 7ft easy by now. Stalk is insane, biggest i've ever grown, going to need a chainsaw to remove it! Fingers crossed for a dry August / September. Hoping weekly spray of LCPT will keep Botrytis away, last fall we had 98% humidity, not much hope with that!

Had big fires and power outages lately. The first big power outage seemed to put the og in flower and the second to both of the NLs. Learning a lot! Got a good humidifier that will hold stat. It was always 15% or lately a few times, 100%. Don't want either of those too long. Got a new pump watering can with 4L capacity, which is much better than the family cookware. Had to trim the bottom leaves of one of the NLs due to lack of sustanance, which i didn't want to but looks good now. Went to 18 hours light, like the call. Added a lil 30 watt LED grow fixture for fun. Got a new floor fan and added one to the ceiling. Around 300 Watts at full blast. I like growing such challenging beauties. Now just wondering if i should dry in this tent. I might have to.

Smells very fruity and Sweet. Very dense trichomes. Very dark and frosty buds

-Strain: Purple Lemonade - Fast Buds -Tent: 5x5 Gorilla Grow Tent -Lights: Budget LED Grow Lights 2 x 250 Watt LED Full Spec/Red Spec mixed boards -Light Cycle: 18/6 -Soil: Fox Farm -Air Circulation: AC Infinity Cloudline T4 Inline Duct Fan WECLOME BACK GROWMIES! Week 8 here with our STRAWBERRY NUGGETS by MEPHISTO January 14, 2020 (DAY 52) - Hey there growmies sorry for the one and only update this week, i got sick and just cant do it. i hope you all understand.