Recommended
Likes
Comments
Share
Looking much better here after recovering and proper water. I was definitely giving nutrients here but not a lot
Likes
9
Share
THERE IS 4 PHOTOPERIODS LEFT IN THE 5X5 TENT. I WILL BE MOVING ALL OF THE PHOTOPERIODS INTO THE 8X8 TENT ONCE ALL THE AUTOFLOWERS ARE DONE, THEN I WILL SWITH THE LIGHTS TO 12/12 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
44
Share
@RakonGrow
Follow
Note : + jegliches Zubehör wird in der GermniationsWoche aufgelistet . Zeitraffer Videos folgen immer nachträglich. + videos werden so geschnitten das nur ein geschlossenes Zelt erscheint , ergo Fehlen paar reale Minuten (ca 1 Std) . Day 57: + 2.0 Liter Flaschenwasser + + Dünger für Blühte + + + Canna Terrar Flores (Achtung wirkt wie PH-) + + + Canna Boost + + + Cannazym + + + Canna PH+ + + PH 5.91 Da es heute heiss ist , wird wie Gestern laufen . Bis 19:00 Uhr wird das Licht reduziert und dann DLI nachgeholt. Day 58: Da es immer noch heiss ist , wird wie Gestern laufen . Bis 19:00 Uhr wird das Licht reduziert und dann DLI nachgeholt. Day 59: + 2.0 Liter Flaschenwasser + + Dünger für Blühte + + + Canna Terrar Flores (Achtung wirkt wie PH-) + + + Canna Boost + + + Cannazym + + + Canna Rhizotonic + + + Canna PH+ + + PH 5.91 16h jetzt mit 1000 PPFD und jeweils 1 Stunde Sonnenaufgang und Sonnenuntergang. Day 60: Mal ein bissel Größenvergleiche gemacht .Das Clipper Feuerzeug ist 7.5 cm hoch . Day 61: + 1.75 Liter Flaschenwasser + + Dünger für Blühte + + + Canna Terrar Flores (Achtung wirkt wie PH-) + + + Canna Boost + + + Cannazym + + + Canna Rhizotonic + + + Canna PH+ + + PH 6.01 Day 62: Das Wetter bleibt stabil, damit bleiben die Growwerte auch stabil. Bisher Läuft das 1000 PPFD Spitze und 750 PPFD Sekundätriebe ganz gut . Ihre Freundin die leider ein Wasserschaden erlitten hat (tja da war wohl irgendwas im Wasser was ein Regenbogenfilm erzeugt hat , im schlimmsten Fall Waschmittel) nimmt der einen Seite zwar licht, aber geht halt nicht anderes bei nur einer Lichtquelle . Ich fahr halt gleich ein doppel Experiement mit dem Licht. Bisher aber holt sie ganz gut nach mit 900-1000 PPFD auf die ziemlich gleich hohe Krone . Day 63: + 1.75 Liter Flaschenwasser + + Dünger für Blühte + + + Canna Terrar Flores (Achtung wirkt wie PH-) + + + Canna Boost + + + Cannazym + + + Canna Rhizotonic + + + Greenhouse Feeding BioEnhancer + + + Canna PH+ + + PH 6.01
Processing
Likes
2
Share
Que pasa familia , vamos actualizar estas misty gorilla auto de Zambezaseeds, están increíbles, vaya color, como van formando esas flores , añado mega PK(0,5gr),Terminator, tricoma y explotacogollos (0,2gr),todo de la gama AgroBeta, que por cierto contentísimo con los resultados hasta ahora , cubren todas las etapas de principio , hasta el final de la floración. Sigo controlando la humedad en que no suba de 50% la temperatura que no aumente de 27 grados y el ph controlado en 6,2 siempre en cada riego tenga nutrientes o no. Pues lo que veis es lo que hay espero que os este gustando este diario, ya que no soy partidario de poner autoflorecientes en indoor, os traigo el lst en indoor con autos para seguir aumentando los diarios y que os puedan servir de referencia o futuras dudas, un saludo fumetillas y que tengáis buenos humos.
Likes
55
Share
So she got the chop 2 weeks prior to what I wanted, but I did not lollipop enough doing this Scrog and suffered high humidity, lack of airflow and as a result lost 4 tops... Out of 16 big ones. But I have harvest, wet trimmed and left to hang dry in a room on clothes drier. Room circulation fan on low, and temp is 22c with 51% humidity. Aiming for a 10day dry it maybe sooner. Then we will smoke test and cure then re test 🙌💚 Thank you all for following along this LONG and heartbreaking breaking Journey
Likes
6
Share
@JonGrow
Follow
Seems all is ok . Flowering 3 rd week. All of them are huge , ses.litighting case, distance, but only way to control hot air. P.S ACTUALLY WE WAS NOT EXPACTING CLONING OF AUTO FLOWERING STRAIN ,BUT IT HAPPENED, TOOTS ARE CRAZY . =)
Likes
19
Share
Great week both inside the tent and out this week. Inside they've been fattening and frosting up like crazy. Carl 1 is 50/50 on pistils and still mostly clear trichomes, I'm thinking 2-3 weeks. UKBS 1 is 80/20 on pistils and starting to cloud a little more, I'm thinking 1-2 weeks in that department. Outside, I've built a little greenhouse thing for the plants to chill in, out of the extreme winds. They've been acclimatizing fairly well to the low night temps and very hot days, but that's not to say they're entirely thrilled with it. Hopefully they take fully and flower out well. EOS Rebel T5 shots coming soon, tomorrow or the next day. 6/24/2021- Had some rain overnight, structure held up and kept the moisture out. Came outside to totally dry plants, and it'd been raining for several hours. 6/25/2021- Got the EOS T5 out tonight, got some real good shots of both plants. Carl 1's HUGENESS and UKBS 1's frostiness are definitely showcased well in my opinion. -Timelapse is out this week. Should only be another couple weeks on the indoor plants, probably not enough for a month. (unfortunate as the youtube "Month" Timelapse is going up this week.) 6/29/2021 - Fade on both plants coming in nicely. Purple and yellow on Carl 1, and a much darker color scheme on UKBS 1.
Likes
7
Share
@Athos_GD
Follow
D55. Plants are really changing at this point. Calyx’s are getting swollen. Still some clear trichomes.
Likes
3
Share
@Cainb
Follow
A couple more days and she will be ready.
Likes
3
Share
For sure i will keep this plant in stock. Very different and potent head high with great looking buds and strong flavor.
Likes
6
Share
@BigGGrows
Follow
This week i harvested her on day 88 from seed week 13. This girl had some issues. She none the less survived long enough to finish up. Around the 2 week of flower she began burning up underneath the led's ( which don't get that hot). It's really weird, because out of 3 plants that were under the led's i run, this candy kush was the only one to react this way. I narrowed it down to this being the issue after flushing and verifying run off ph, defoliation, and nutrient decreases.She was also transplanted during preflower from a 1 gallon to a 5 gallon pot, which she took to well and really grew alot bigger from. I pulled off soooo many damaged leaves from the issues that occurred from the burning. It was so bad, i eventually built a greenhouse for her to finish up in. Although i think she could have been grown better and produced more, i cannot complain. I did oven bake some bottom branch larf buds and rolled up a sample. Of course the terpines were garbage and she tasted like shit haha, but the high was pretty good and intense! After she is done drying i will supply dry picks and weights, then she will be going into them curing jars. Oh and she was flushed for one week using only tps signal and molasses. She will indeed get another run in the future.
Processing
Likes
3
Share
The temperature had some fluctuations, and the plant got a bit more humidity a little bit of mold on a few fan leaves.. a bit too much water consumption
Likes
14
Share
Van preciosas estas Og Kush CBD. Se ha dado muy fácil su cultivo avanzan y progresan de buena manera. Última semana de fertilización de engorde, el próximo riego ya será para finalizar este cultivo.
Likes
24
Share
COLOMBIAN JACK BY KANNABIA Week #8 Overall Week #8 Veg This week she recovered from being topped and being pruned she's going great it's also crazy hot right now and she's dealing with the heat she's got some great genetics!! Stay Growing!!
Likes
3
Share
@4D2
Follow
Transplant ..... Grow BIG ROOTS !!!!!!!!!!!!! 😋 Keep it simple ...maybe!!! VIVA LA MOTTA
Likes
10
Share
Week 16 and two of the plants are almost ready for harvest, probably next week I’ll be trimming, Grape Diamonds and Cotton Candy Grapes. After that I believe that the rest should be staggered for a good harvest in two more weeks.
Likes
31
Share
🦍 cookies ancora pochi giorni ed è cotta anche lei.. buonissima,!! Ha un profumo delizioso super. I'attesa si fa lunga 🤣😉🤣😉
Likes
43
Share
~Entry for the 'Best Rarest & Smallest Pot by Seedsman' contest~ Starring 🤩.... ~ Seedsman Zkittlez Auto ~ Zkittlez (Grape x Grape Apple) Auto x Auto Fruit (Auto Fruit Cheese x Auto Blueberry) Zkittlez Auto is one of the very sweetest-tasting auto strains available anywhere. It is a sativa-dominant (60%) strain that was bred from Zkittlez (Grape x Grape Apple) Auto crossed with a male Fruit Kush Auto, the latter a remarkable fruity strain bred from Fruit Cheese Auto and Blueberry Auto. Growers can expect to harvest some good yields of high-THC buds. Zkittlez Auto remains a fairly short plant, rarely exceeding 120 cm. in height wherever it is grown. This is a vigorous plant which is able to metabolize a high level of nutrients and she's a thirsty girl too! If growing indoors close to neighbors it is strongly advised to ensure good and effective carbon air-filtration in order to neutralize powerful odors. This strain's life-cycle is approximately 90 days from seed to harvest. The leaves on this plant are big and wide serving to convert every lumen available into Zkittlez goodness. Indoor growers should obtain between 400 - 500 gr/m2 while plants cultivated outdoors will produce slightly more at 500 - 600 gr/m2. Lateral branching is very good and it is recommended to use supports/ties to prevent snapping and keep buds close to the light source. This strain's scent is sweet and fruity with candy and berry notes. Its high-THC has been measured at between 21 - 24% with less than 1% CBD. The effect is well-balanced, cerebral and euphoric, and is very good for social situations as well as for relaxing in front of the TV either alone or with company. It also has the added effect of helping to relieve chronic pain, helping with nausea, insomnia and depression as well as stimulating the appetite.** **Credit to Seedsman.com ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~ The Setup ~ ~ Grown in a 2qt plastic popcorn pot filled with Mother Earth Grow 70/30 Coco/Perlite with Xtreme Gardening Mykos added. ~ Seed was germinated directly in the medium without any 'pre-soak' ~ Feeding will be by Dutch Pro Nutrients ~ 24hr light cycle while germinating ~ 20/4 light cycle after first leaves appear. ~ 4x8 Gorilla Tent ~ HLG 650R w/ 30w Supplemental UVA Bar controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. (also a HLG Blackbird for additional side lighting if necessary) ~ Supplemental co2 controlled by an AutoPilot APC 8200 co2 controller ~ AC Infinity Cloudline T6 with Controller 67 using a Terrabloom 6x24" carbon filter ~ De-Humidifier and Humidifier when needed. ~ 14k BTU IdealAir portable A/C unit plumbed into tent for temperature control. ~ BlueLab testing instruments ~ Two Hurricane 18" oscillating fans ~ Two 6" Clip-on fans ~ Two 10" floor mounted fans ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ The Harvest: After checking her trichomes which were at 90% milky, I placed the Zkittlez Auto into complete darkness for 72 hours. While in the dark I maintained a temperature of 65-68℉ and a RH of 40%. After three days in the dark I removed the Zkittlez Auto and all I can say is WOW! All of the flowers on the Zkittlez were just covered in trichomes and it had a super strong sweet/fruity aroma that hit me right in the face!😍 I cut the Zkittlez and hung her in two sections as the flowers were huge, and I wanted to make sure that there wasn't going to be any issues with air circulation around them possibly causing issues. It's wintertime here now so I took advantage of the low temp's and RH hanging the Zkittlez Auto in my attic. I sealed off a section of the attic from any light leaks and installed a de-humidifier, fan and humidifier along with a hygrometer which I suspended at the same level as the plant was hanging which give the most accurate reading of temp/RH. After hanging the Zkittles, I adjusted the fan direction so that it was not blowing directly on the hanging plant, but kept the air slightly moving in the room. I set the de-humidifier for 50% which I run for the first 24hrs to knock down some moisture in the plant, then set it to 60-65% for the remainder of the drying time. The Zkittles Auto hung for a full 12 days, during which I checked on it daily to empty the de-humidifier and make sure that the environment stayed on point. After hanging, it was time to trim this beauty up and get her flowers into glass jars to begin the curing process which I prefer to take at least one month, preferably 2-3 months to really get a good cure and allow all the starches to convert to sugars, the remaining chlorophyll to metabolize and the terpenes to form their bouquet! Trimming the Zkittlez Auto by Seedsman was a breeze and resulted in some tightly stacked and absolutely gorgeous flowers that are loaded with shiny trichomes that sparkle, and a sweet and fruity aroma that will make your mouth water!😍 I was super stoked to harvest almost 100g from this beautiful autoflower that was grown in a little .5g plastic popcorn pot that I had saved from a trip to see 'Top Gun Maverick' at the theater and I can attest from cultivating Seedsman's Zkittlez Auto in the past, that with a bigger pot, it is capable of some incredible yields! All in all, this grow was super fun and easy! I highly recommend Seedsman's Zkittlez Auto to everyone from novice's to master growers as it NEVER disappoints to produce some mind blowing fruity buds! ❤️❤️❤️
Likes
8
Share
@Max1973
Follow
Day 35 - few pics and vids..... everything going along nicely 👍 This is a pretty big update, so i'll add to it over the next few days, as i finish building it all.... i'm building these 2 x SS haze, the full tent, just finishing up the setup..... trimming them, changing solutions to 12/12 and flower..... changed the exhaust fan and filter setup to the better outside the tent method.... and installed 12v CPU computer fan, lol ("alta9" fits in 4in ducting perfectly), drops wattage on extractor fan.... 10w tops... got a few kg of active carbon and making/replacing the carbon filter .... i'll add afew vids of the new setup in afew days... Day 36 - few pics/vid of new tent setup...... "alta 9" fan :) post tomorrow after i finish trimmin and settin up night mode etc...... and into tomorrow we go, lol ... Day 37.... slowly getting there..... little bit more to go... this should make things abit more interesting..... right tank (short babie) has : 19 lts of tap water @18oC + 150 ml -dutch master one gold FLOWER.... 6.4 PH - 1400 PPM left tank has : 19 lts of tap water @18oC + 50 ml of elements a and 50ml of b and 10 ml of nitro and 20ml of Crystalic (molasses/pot) .... 6.5 PH - 1200 PPM more pics / vids of the finished tent setup.... roots, transfer, etc... Day 37 is alot of vids of the clean and change to flower..... edit - day after build noticed left tank (nutrifield) not enough bubbles..... pulled out the 4 air pump and swapped to the 2 x original oxipumps... much better, also to fix the problem with ph goin high, and bubbles not stirin the mix, was to add another 10ml of crystallic and another 5ml of nitro... then pumped both tanks with ph down and set em to 5.8-6.2 - both plants have fully recovered from the big trim, and bounced back within 12-24hrs, post pics/vid in abit..... Day 39 - made a freaky video... was curious about what the plants would see looking up at the lights... the lights and buzzing of air compressors and bubbling tank water, and dazzling lights turned out pretty cool in vid editor, was in selfie mode.... and final vid of the bounceback from trim :) 👍😎