Week 7 for the gorilla cookies from fastbuds 420!!! We gave the last week of xpert nutrients feeding and will continue now with only water, harvest time is soon and at the moment the buds are looking great, nice smell in the tent and the buds are nice and covered in trichomes! The plants are not that big but of course i have quite some plants together in the tent and 7 liter pots so they stayed a little smaller, next time i will do maybe less plants but with the bigger 420 fastbuds airpots!

Day 1 of Week 9: Everything looking good so far, the upper buds starting to gain mass and resin, lower Buds still pretty "hairy" but also resinous. Day 2 of Week9: Aint got nothing to tell tbh, everything goin good. The Cookie smell is dominating in this stage of flower as always. Day 3 of Week 9: All good, slowly the slight piney sour note adds to the cookie smell, also just fed her 3 L Rainwater with 9ml Élan, 6ml Uphtrive, Spark, Prosper, 1.5g Kick Off and 4ml Bio Tabs PK. PH 6.3 EC 1.8; Drain: 950ml PH 6.7 EC 2.4 Day 4 of Week 9: Decided to remove some of the smallest and lowest buds (5 in total). Day 5 of Week 9: All good, the sour and gassy smell is getting more intense. Day 6 of Week 9: Haven't really had time to take a proper look at her today tbh, topbud getting purple hues. Day 7 of Week 9: All good

The only plant left was the Jack Herer and it is its last week 😎 I watered it twice with clear water before chopping it down. After the harvest of the two other plants, the humidity in the room dropped signifcantly. If you are interested in more detailed graphs about the plants heights vs weeks, see the harvests. It was a long journey but I really enjoyed it 😁

First week of flowering started for our strawberry cookies 🍓 from the Super sativa seeds club We add a small amount of biogrow the last week and the next week we start with xpert nutrients as always!!! We continue to monitor with our tentX controler

Week 7 for the ztrawberriez from fastbuds 420!!! We gave the last week of xpert nutrients feeding and will continue now with only water, harvest time is soon and at the moment the buds are looking great, nice smell in the tent and the buds are nice and covered in trichomes! The plants are not that big but of course i have quite some plants together in the tent and 7 liter pots so they stayed a little smaller, next time i will do maybe less plants but with the bigger 420 fastbuds airpots!

Week 7 for the banana purple punch from fastbuds 420!!! We gave the last week of xpert nutrients feeding and will continue now with only water, harvest time is soon and at the moment the buds are looking great, nice smell in the tent and the buds are nice and covered in trichomes! The plants are not that big but of course i have quite some plants together in the tent and 7 liter pots so they stayed a little smaller, next time i will do maybe less plants but with the bigger 420 fastbuds airpots!

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. iSOPRO......ops caps . ... beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Brain suggests I should create a secondary toroidal field with the same frequency and place it so it emits from the same reference point on the plant, (ZEPHERIUM) constructive interference suggests it should increase in size. If the toroidal field dictates the proportions, does increasing the toroidal size increase the proportions? Need identical genetic clones. Resonant Frequency: My first real-life experience of this was placing a grape in a microwave as a child. A resonant frequency is the natural vibrating frequency of an object and denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and could keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in sympathy with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

No estoy muy satisfecho con el cultivo. Aun habiendo realizado varias podas y defoliaciones todavía quedaban muchas ramas bajas y cogollos pequeños que han influido en el resultado final. En el próximo cultivo cambiaré la estrategia.

Feb 22 This guy really is FAST. I guess FastBuds was right. I'll need to attach a timelapse to show just how fast it's taken off.

Feb 22 Really starting to thicken up! The soil underneath is still plenty moist even though the fan is blowing on it 24 hours a day. The roots will grow more quickly as the water dries up and the roots continue their search for more.

21.02.24 Update Eintrag folgt 🙂

Second gusher flushed for harvest this coming weekend the other I pulled a week ago is dry and trimmed taste great!!

Pulled the shorter of the 2 Sater day week 11 flower the tall one I’ll flush next week and give her 2 weeks for 13 weeks of flower total! Found one seed on the branch I pollenated with FW10 on the short one I have drying !!

Humidity and temps lowered, fan speed increased and will get fed friday..Friday Feed is what I call it..otherwise I kept forgetting which days I added nutes and started confusing myself LOL.. My runtz is looking beautiful..my little mini tree, everyday I see more pistils and I’m hoping this will be my best yield yet!

Lil defoliation lil lst

Overall she grew good. No harsh reactions so I'm happy to put some bud in the jar. She vegged out 20cm and got to 35-38cm and finished with a lovely fade. Amazing scents. (More to come after some review next month. This pheno gets 9☆ the other 10☆ as the yield on my last Highcloudz was like 3-4x. But the buds are of a much higher grade. So, its a very high rating. Just sad there's not much of it. In saying that, now that you can change the rating I've no doubts I'll be giving it a 10 upon my smoke review.. I've fems left so ill be doing a SOG soon and this fem will defo be in it. 15+3-4 grams i quick dried. This defo needs a cure. The taste is so confusing, I get the scents of watermelon, typical zkittlez smell with a twist, the confusing part. Is f there's different smells coming from different buds. Smoking there is a very light panty taste. Very stoney, uplifting, very happy with when I harvested. Has much more of an energetic buzz with a nice mellow high. Very strong but not couch locking so things can be done. It kinda puts me in the zone. Been one of my smaller harvests. I have 2g left to keep out for 2moro day, I'll be putting this on 4-6 week cure. I'm gonna leave it out for another 12hrs or so. The stuff that came off the stems just now is very very slightly till wet. It would be able to put into the cure jar, but would need a lot more burping. So, id rather leave it to dry out properly and I'll burp every 12hrs, leave lid of for 4-5m and after a week, I'll slowly start burping it less. Knowing how weed dries you really can't set times on curing you go with how the weed feels. There is no hay smell. (I didn't have any worries about a hay smell. My drying room is 15c and 60-63% RH.

16.2. - Entering new week, which is the last one for the 4 plants I flushed already. Everything is looking fine and I'm excited to harvest ✂️ 19.2. - So tomorrow is one of the big days. I've decided to harvest few of my plants as they look ready to me ❤️ I've also added some close-ups of the beautiful frosty, fat and smelly buds ✌️ 20.2. - One Creamatic and one Fritter harvested ✂️ I've decided that others still have some time left to mature. 22.2. - Week wrap-up: Two plants harvested and drying, another two getting ready and others are still growing. I'm getting worried about the Gelato plant as it started yellowing and buds are not developing much. 16.2. - 22.2.2024

This week has seen a bit of stretch but theyre all hitting flower nicely opening the tent right now makes my heart sing. They all look so healthy and happy to me. This is hands down the deepest green Ive managed to get my plants compared to past grows I think the blurple has played a role in that and maybe from starting silicone from the moment they popped. Im glad I took a few clones from these before I flipped just hoping the clones pull through as these are some happy ladies in my opinion.

2/17/2024 - Vegetation Week 1 Day 1- I removed some of the water to see where the roots were only one had roots in the water. However I want to go ahead and get them on Week one Nutes So I am over 50 gallons of water in the system so I mixed the Trio at a 1.0mil per Gallon but restricted it to a top of 50 gallons period. I top fed the other two to keep encouraging root growth. I also finished my drying and curing from my last run and wanted to show what it looks like all bagged up and in the cannatrol. I added the following Nutes: Silica = .5Mil/Gal= 25Mil CalMag= .75Mil/Gal= 37.5Mil FloraMicro = 1Mil/Gal= 50Mil FloraGro= 1Mil/Gal= 50Mil FLoraBloom= 1Mil/Gal= 50Mil ORCA = .5Mil/Gal= 25Mil EPSOM- 1 big pinch 2/18/2024 - Vegetation Week 1 Day 2- I top fed #1 and #3 since they still don't have roots in the water, I will continue one top feed a day until roots hit water. 2/19/2024 - Vegetation Week 1 Day 3- #3 now has root in the water.. Yay!! I now have #2 and #3 with roots in the water so no top feed for them. I only had to top feed #1 and the only reason I didn't just go ahead and cull her today was I am responsible for breaking her tap root and stunting her, I wasn't careful enough and she was the first to show a good root. In that vain I will carry her a few more day's top feeding but if not root by the end of the week she is getting culled. 2/20/2024 - Vegetation Week 1 Day 4- Today I Ensured the PH is in range, I refilled the Humidifiers, I top fed #1 since the roots are still not in the water. I also removed the humidity shields from #2 and #3 today the ladies were touching the sides so they are done with the extra shields.. 2/21/2024 - Vegetation Week 1 Day 5- Today Morning: I Ensured the PH is in range, I refilled the Humidifiers, I top fed #1 since the roots are still not in the water, Evening: I decided that the roots of the two are looking great so I am going to drain and bump the Nutes to a full Week 1/ Week 2 Nute base. I added 36 Gallons I added the following Nutes: Silica = .5Mil/Gal= 18Mil CalMag= .75Mil/Gal= 27Mil FloraMicro = 3Mil/Gal= 108Mil FloraGro= 2Mil/Gal= 72Mil FLoraBloom= 2Mil/Gal= 72Mil ORCA = .5Mil/Gal= 18Mil

Doin good