Likes
Comments
Share
Eccoci qui... Tutto va per il meglio, questa settimana non ho applicato stress alla piccola, ma ho guardato l'evoluzione che ha avuto dando i nutrienti. Ora ha un odore davvero intenso ed uno strat di resina pauroso, vediamo come si riprende dalla defogliazione che ho fatto settimana scorsa. Seguiranno aggiornamenti, grazie a tutti per il supporto🔥🌲❤️
Likes
8
Share
Did some cuttings on her, found some bugseggs not much It's been raining a lot but she won't be up for very much longer and I still hope for some sunny days😘
Likes
59
Share
So, sad day friends. I got spider mites and had to throw all my plants out. This is what I think happened: About 2-3 weeks ago I noticed some freckling on the lower leaves. I looked at it and thought it might be a cal/mag issue so I added cal/mag that week and went about my business. I saw it about a week later and it wasn''t getting any better so I added more cal/mag. This continued for about 2-3 weeks until I finally took off a leaf and examined it under my microscope. I saw little bugs crawling everywhere and my stomach just dropped. My fiance did some quick research while I was panic ripping leaves off (see pictures) and she correctly diagnosed it as spider mites. I debated with myself and my close friend and ultimately I decided to throw all the plants in my tent away. I know that there are a lot of people who will say that there are things I could have done to make it to harvest but what it came down to is the people I take care of and personal pride. I consider myself a caregiver and I give away product for free that I am not going to use to my family and close friends. I thought to myself "Would you smoke this?" and when my answer was "ehhh, I don''t know", I thought about how it would feel giving it away and immediately made the decision to destroy them. I take an immense amount of pride in my product and this hobby and if I am not going to stand behind it I would rather just start over. I grow from my heart (shout out to the Grow From Your Heart Podcast!) to help people and make sure my family is not getting unsafe product from sketchy people. To spray pesticides in flower that may hurt people and have little bug carcasses in there just goes against that in every way and is just wrong in my opinion if you are giving it away to others. If you are the only one smoking it then it is one thing to take that risk but not with your patients. I want my medicine to help people, not create or exacerbate health issues. It is also important to note that the mites had moved from my flower tent into my veg space and took over my auto berry as well. Damn things are crafty and fast. So that is why I made the decision to destroy them all after 3 months of res changes, pruning, and manifolding on a slow vegging strain. Feel free to chime in with your opinion but I do not and will not regret my decision. I threw out my new clones, mother plant, and auto berry I had on my veg side as well. Shout out to all the other growers out there that do the right thing by their patients. Caregivers > Cash croppers. For anyone curious, I removed everything from my tent and scrubbed it all with a 20% bleach/water solution. All equipment has been wiped down and stored in the garage away from any organic materials. I will give them until tomorrow (2 days) to air out and dry and then I will wipe it down again with bleach and wait another 2 days. Hopefully that will make sure everything is dead and will not come back next grow. That next grow should start in about a week. It sucks but sometimes it happens and you gotta be ready for it. Lesson learned. Never bring outdoor plants into your indoor garden even if it is after just a day or two. A bunch of people on here and Reddit warned me and I did not listen. Now I have learned the hard way and it feels like when your parents "told you so" haha. Thanks to everyone who stopped by along the way. Stay tuned for a new grow coming soon. It is going to be some cool new limited edition Mephisto Illuminautos. I am pretty excited. Good luck out there and always grow from your heart folks. -Grim
Likes
27
Share
@Major
Follow
hi i think i will wait a few more days to harvest the frichomes are not yet ripe and that's good i still have too many green leaves on the plants. a light watering to hold 3 to 4 days and harvest. ciao ciao😃😃👌
Likes
107
Share
@Afterglow
Follow
Ну вот и закончился наш короткий путь выращивания сатива-доминантного сорта. К сожалению, размер бокса не позволил полноценно включить лампу, так как растение сильно вытянулось и стало получать световые ожоги, плюс еще сыграл недостаток кальция. Изначально хотел 8 больших, толстых и симметричных колл, но пришлось гнуть дополнительно. На фотографии видно, что все ветки закручены по спирали - это пытался решить проблему сильно низкого освещения. Давно не растил сативный сорт и забыл, что в начале цветения растение ну очень сильно вытягивается. В итоге, из-за LST во время цветения, нижние этажи тоже вытянулись и вместо 8 колл получилось в 3 раза больше. Все-таки мне мой метод больше нравится, чем ML, так как времени уходить меньше, стресса меньше, а результат такой же. Снял 607 грамм больших веток и около 100 грам всякой мелочевки. Немножечко пересушил. Так бы вышло грамм 200 чистых шишек. Придется чуток их увлажнить. Вцелом очень доволен собой и результатом. Спасибо что заглянули и порадовались вместе со мной.
Likes
65
Share
Hey guys :-) . Today the plant was sprayed again with neem oil. There weren't any more trips to be seen after the second application, but to be on the safe side, you did it again today get a cure. That's why the beautiful dark shimmer on the leaves :-). She has developed very well this week. I will give you 7-10 days before I switch to flowering. This week it was poured 3 times with 1 l each (nutrients see table above) I will tie the Dr Grinspoon down again with LST and apply topping because it will be damn big 😂. Otherwise everything was cleaned and, as always, everything was checked. Have fun with the update and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.barneysfarm.com/dr-grinspoon-5 Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany
Likes
10
Share
Das wird wohl die letzte Woche, ich schaue mal wann ich ernte. Ich denke ich werde ab jetzt auch nicht mehr gießen damit die Erde etwas trocknet und die Pflanze etwas stressed. Ich werde auch 1-2 Tage vorher das Licht aus lassen. Aktuelle Werte: VPD: 1.6 Humidity: 54% Temp: 31°C DLI: 50 1055 PAR
Likes
9
Share
@Bncgrower
Follow
Another week is over. I've been a bit short on time and this week has been really busy, but here we go... it seems to be fine, except for some of the leaves looking a bit burnt and yellow, probably due to the increased nutrient load in the last few weeks. They've been eating a lot and the smell is really delicious. Happy growing! 🌱🌱🌿
Likes
6
Share
Nice big early flowers on this strain.
Likes
184
Share
#seedsman420growoff and #SeedsmanSeeds 📆 Week 5, 25-31 May 2024 25-27 May - Observed and let the plant grow. 28 May - Defoliated plant. 29 May - Placed scrog ring on trellis system, bent top of plant over 90 degrees, adjusted and spread branches (see pictures). 30-31 May - Observed and let the plant grow. 📑 I’m very pleased with the way this plant has responded to the nutrient schedule so far. Now it is time to see how she will do with training. I like using a version of the scrog method most because it gives me the greatest space for bud growth overall. My experiences have taught me that under these lights there is about 15-18” worth of quality vertical bud potential. Anything below that line is only draining on the plant, and not receiving adeqate DLI. So I dont need to focus on a tall plant - rather a wide one. Now that she is under a scrog the DLI has a significant canopy increase. What I’ve done with this plant is cut all side shoots off the main branches up to the scrog. She will grow for another week to allow all for growth to develop just above that and then be flipped to flower. I’ve never grown this plant before, but assumeing she can double her size during pre-flower, I’ll have plenty of room in my grow tent. The Trellis System: is made with 1/2” (12.7mm) white, SharkBite PEX, 1/2” pex clamps, small screws/nuts #6-32 x 3/8 in (to hold clamps opposite each other, this is what holds the structure together, side bars, rings, scrog), 1/2” pex straight coupling connectors (to connect rings, and extensions), nylon tape and nylon cord. The frame design is independant from the bucket and can be put on anytime before or after the start of the grow. It simply snaps together (nothing needs to be crimpted), the rings stay in tact with coupling and tape, the netting is strung once for the most part, I prefere 2” squares, and held in place by clamps. The size of the rings depends on the size of your pot, the bottom and top ring are measured seperately. The scrog ring is determined by the size of the tent or desired spread. It takes 5 side bars evenly spaced apart and snapped on the bottom ring 1st to hold the frame sturdy in place, their length should start flat from the bottom to about 8” above the top of the bucket. Place the pot into the bottom ring with 5 side bars already attached, lift up the bars, then put on and attach the top ring, this prevents it from moving. Both are then placed on a 12” Bonsai turn table for easy access and observation of the plant. The final scrog is placed on when the desired height is close to being achieved, then maneuvered down over the plant. A simple design that allows you to easily adjust the netting (place extenders on side bars faceing in opposite direction for additional height) and opens many other possabilities for training. See pictures for an example. 🍶 25 May nutrient solution changed 🍽️ 25 May feeding schedule updated 💧 Using reverse osmosis water with EC/TDS at 0 🐉 Nutrient Solution EC 2.3 at 73 degree F 🔆 Light power at 60%, DLI 30-35 canopy coverage at 18hrs 😤 Using General Hydroponics, HGC728040, Dual Diaphragm Air Pump, 320 GPH That is it for this week. Thanks for the look, read and stopping by.
Likes
14
Share
This week the girls were covered in snow. I've never seen anything like it with my own eyes before, only in pictures :D The lower large leaves have turned yellow, but this time don't panic :D experts say it's normal.
Likes
9
Share
📆 Semana 9 La planta se asienta plenamente en el cultivo en exterior y muestra una respuesta muy positiva al entorno natural. El crecimiento se vuelve más vigoroso y constante, con una mayor ramificación y una expansión clara de la masa vegetal. La estructura gana densidad y altura de forma progresiva, mientras el sistema radicular continúa consolidándose en el suelo, mejorando la absorción de agua y nutrientes. El color se mantiene estable y saludable, reflejando una adaptación completa al nuevo medio. ⚡ EC: 1.0–1.1 💧 pH: 6.2–6.5 🌡️ Agua: 20–22°C 🌫️ Humedad: 50–60% 💡 PPFD: luz solar exterior 🌡️ Temp ambiente: 18–26°C 🔥 Nota: Con la planta ya adaptada al exterior, el crecimiento suele acelerarse notablemente. En esta fase se prioriza seguir fortaleciendo estructura y raíz para sostener el desarrollo futuro y maximizar el vigor en las siguientes etapas. Seguimos creciendo fuerte 💪!
Likes
8
Share
@RFarm21
Follow
Semana 8 abril - 14 abril 12 abril feeding day (1.5l): Calmag 1.5ml; bio bloom 4.5ml; topmax 4.5; bio heaven 5ml; acti-vera 5ml; bio grow 4ml; alg-a-mic 4ml pH 6.6
Likes
3
Share
She's popp'n and whew were!!! This is an amazing strain. Thankfully I have more beans and the next round clones will be taken for sure. This is one of those that a wise commissure would keep a permanent spot in his or her line up. And these were bag seed of a strain that I was informed that's not available in seed or clone. I may be wrong but the quality of this strain tells me all I need to know!!!
Likes
9
Share
@Drtomb
Follow
Starting week 2 of flower. Been slowly trimming any sucker branches that reach away from the main stem by greater than 2". I have moved branches into positions in the scrog screen to efficiently fill the whole net.
Likes
8
Share
This was the last week of Veg for these beautiful ladies. Installed the SCROG on Sunday afternoon, and they are already filling it in nicely. Started reducing light Thursday by 2 hours, so by Saturday they will be on a 12/12 light cycle to finish them off 🤗. Did some defoliation, and have been twisting and spreading the tops to fill the canopy screen. They are very thirsty, I had been watering every 3-4 days, and for the past week it’s been 2-3 and they are getting close to a full gallon each! I’ve Upped the light % gradually over the last 14 days from 50% to about 75% now in prep of flower. They have been responding well to the increases, as well as the extra heat generated. Temps are going up a bit, close to 81-82 degrees on very hot days here, but they are not too often. Average is about 79 degrees. Nutrients (P and K) were increased also in prep for the demand the flower makes as they begin. Looking forward to the good part. Happy growing 🇨🇦❤️🌱😎💨
Likes
25
Share
This week the Jelly Donutz clearly entered the heavy resin and terpene production phase 🍩✨ Buds are stacking nicely across the plant and the overall flower formation became much more pronounced. • Stretch completely finished • Focus fully shifted toward bud swelling and resin production • Spear-shaped flowers continue developing across the canopy The structure remained unchanged at around ~100 cm, confirming that vertical growth has fully stopped. Instead, the plant is now investing all energy into flower mass and trichome coverage 🌸 One of the most noticeable changes this week was the increase in frost production ❄️ Sugar leaves are now heavily coated and trichomes continue spreading deeper into the buds and surrounding leaf material. The aroma also became significantly louder 👃🔥 The terpene profile is difficult to describe but extremely unique, sweet, fruity and very reminiscent of jam or fruit confiture, with a candy-like background typical of the Jelly Donutz lineage. Light intensity remained high: • Top colas receiving up to ~1100 PPFD • Lower canopy still receiving ~800–1000 PPFD ☀️ Despite the strong light intensity, the plant continues handling it well with only minimal signs of stress. Water demand remained stable: • ~4L every 2 days 💧 Feeding this week was intentionally simple: • RO water + BioBizz CalMag only Environmental conditions stayed consistent: • ~24°C temperature • 50–55% RH 🌡️ No major training or defoliation was performed this week. The branches were only slightly adjusted and supported with stakes to improve spacing and light penetration through the canopy. Overall the plant looks healthy, increasingly resinous and very aromatic, with the flowers now entering the stage where density and terpene production begin accelerating noticeably 🍓🔥
Likes
41
Share
*********Week 4 Flower - October 10 to 16, 2020, Days 22 to 28********* They are doing awesome!!! Nice progress for week 4. The tent is getting stuffy and full. Flower has been very strong for growth. Cream 47 girls are getting thicker and praying hard everyday. The leaves are big and pointing up everyday. Further leaf strip this week to allow more light below. Nutrients are following the same for the most part this week. Big Bud doing its job and helping to swell the colas. Silica still added to keep strengthening her stems. Overall, stay the course this week and keep them happy. Getting stuffy and looking forward to a bigger tent arriving soon😀 Little more detail........ Oct 11/20, Day 23 - 4L - Rezin, Terpinator @ 2ml, Big Bud, B52 @ 1.5ml, CalMag, Sensi Bloom, Bud Candy @ 1ml - good amount of runoff from the pots. - water only next feed.....reminder😀 - had some higher heat levels yesterday at 86 degrees. The leaf strip is helping and down to 82 now. Oct 12/20, Day 24 - Light watering again today. - 3L with Enzymes @ 1ml = 25ppm and 5.6pH - Leaves are darkening up.....little concerning. - letting them do their thing. Oct 13/20, Day 25 - 3L - Rezin, B52 @ 2ml, CalMag @ 1ml = 400ppm and 6.1pH. (missed pH was 6.4…...added B52 to lower) - took a couple of lower branches from C47 girls. Oct 14/20, Day 26 - 3L - Microbial Mass @ 1.5ml, Piranha @ 1ml = 80ppm and 5.9pH (was shooting for 6.0) - C471 had runoff pretty quickly. - Microbes to help the roots as we get closer to the end. - sticky girls removing a couple of leaves today. So that wraps up the week. They look good but I am not seeing huge changes from the start of the week? Looking good though......keep getting frosty girls👍
Likes
8
Share