Still burn tips and edges Bulking up 3 girls all different, G1 is smal plant did not stretch and is ahead of the others, will be the first going down G2 was the smallest and weakest is w 90 cm and bulking up nicely G3 is big, long branches, stretched more than I was expecting, because of the size and long branches she’s a bit behind the other girls. Btw not very strong smell yet but it’s marvelous so far

38 day last watering with An Grow part A+B 3ml/L, we are moving into flowering (watering 3liters) into watering added: An Sensi Calmag Xtra 3ml/L Grotek Vitamax Plus 1ml/L An Voodoo Juice 2ml/L An Tarantula 2ml/L An Rhino Skin 2ml/L Grotek Solo Tek Bloom 2ml/L pH was 5.6

Gracias al equipo de Zamnesia, Marshydro, XpertNutrients y Trolmaster sin ellos esto no sería posible. 💐🍁MAC 1: La MAC 1 es una variedad muy solicitada, creada originalmente por Capulator y distribuida solamente a determinados criadores y cultivadores. ¡Pero ahora ya puedes cultivar este tesoro en casa y disfrutar de sus cogollos densos, jugosos y potentes! Gracias a su densa copa y vigor, la MAC 1 es una opción ideal para LST, poda apical y otras técnicas de entrenamiento (incluido el lollipopping). Cuando entra en floración, las plantas de la MAC 1 se estiran bastante y una vez maduras pueden alcanzar una altura de 160cm en interior y más de 180cm en exterior. De media, las plantas feminizadas de la MAC 1 necesitan un total de 9-10 semanas para terminar la floración, momento en el que estarán repletas de cogollos índica pequeños y compactos. 🌻🚀 Consigue aqui tus semillas: https://www.zamnesia.es/10906-zamnesia-seeds-mac-1.html Código Descuento 20%: ZAMMIGD2023 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 1: Ha sido una buena semana, ella ha dado otro gran cambio en su lugar definitivo 😎. La carpa está ocupada al 75% y comienza una floracion explosiva gracias a @Marshydro y @Xpertnutrients y @Trolmaster con esta gran genética 💪. A partir de ahora se riega manualmente con las dosis recomendadas por el fabricante.

I removed the large leaves and hung them up to dry , on day 64.

final week. after this i flush and harvest the soil plant looks horrible the hydro looks pretty fat

Start of week 4

week 9 and LOOK AT THAT !! 😄 Im in love with her perfume, the smell is amazing and she is growing by the biggest autos i have ever seen, unfortunatly as you guys can see im running out of space in the 5x5, but thats what it is, super confident i will have a huge yeild from this tent. see you later, give a like and comment, tks 😎

Finally the Sour Strawberry started catching up! It seemed to have some sort of mutation where it topped itself and also rotated while growing. In the timelapse you can see the entire plant rotates about 90° over the course of the week. Sadly the other 3 plants kept throwing new issues at me and were at very different heights, all while the Sour Strawberry was tiny. Bending them had little effect and I did not actually want to super crop them just yet. I had to put in a net.

This week was amazing guys. I literally watched the buds getting fat day by day. I am still feeding with a similar program and adding Aptus Regulator once per week to boost silica and some other minerals like molybdenum and boron. I'm flowering my plants in a hot environment with CO2 boost. PPFD is high to support these settings and thankfully my the pots aren't getting hot. No fungus gnats or any other pests, no root rot and bad smell. Everything is perfectly neat and buds are exploding. My expectations from this harvest is really high and I'll keep adding CO2 for another week. Some fellow growers asked for CO2 and PPFD measurements. I am sharing these information on this week's pictures. I got my CO2 meter fixed and I tested the CO2 PPM in different places of the canopy. Typical value for this grow tent with this CO2 setup is around 1100-1350. Temperature is fluctuating between 28-31 and the average PPFD on the bud sites is 1100 micro moles. I'm sharing CO2 measurements right under the fan, where you expect it to show the lowest value. Then I'll also share the CO2 PPM value coming out from the air pipe, which is normally attached to the grill of the fan. Direct output is now around 5500PPM and in the first two days, the meter shows 10000PPM which is the max value that it can reads. This bucket yeast CO2 reactor lasts for four days and I'm refreshing the mixture twice a week. This is huge CO2 with a fairly low cost compared to propane burners or CO2 tubes. Edit: I refreshed the CO2 bucket today and got you guys a video of the direct output. The system is outputting more than 10000PPM of CO2 and the meter can't measure it for the first two days. This CO2 method is a killer one for tent grows. Very low cost for very high CO2 concentrations. Hope these information helps. Happy growing 💪

I started Flushing two plants as there nearing the end of there days. I'll start Flushing the others this week apart from the kalimist indica pheno as it started flowering 3 or so weeks after the others even though they were all forced together. (alkward bugger) Some of the plants are showing red /purple colours a little bit 👍

Lsd is 75 days old and 35 days in flowering stage. Lsd is looking great I feel like she is growing slowly if any have any ideas on if I’m doing anything wrong. Day 76 I feel so much better she is like great I used my iPad and I could not believe it I seen trichome with my own eyes 👀 wow it was amazing.

Great strain!! Amazing smell and superb flavor and great Stoney buzz!!!

Растение простила промах на второй-третьей недели и идёт польным ходом ✌️🤩💚

Day 29 since I first saw her cotyies...2nd day of Week 5 and the little Dr. shows growth at what seems to be a quicker rate. I'll envisoning some colas from LST and perhaps I top one or two of those just to get more colas, whatever it takes to fill the damned net. Well of course these are just plans. Continue fertigation twice a day., inflow 1200 and run-off 1000 units of EC. Day 30 (10/10/2019) just fertigate her for the first time in the day, inflow and run-off are normal concentrations for the stage of growth. Day 31 One month and a day already... the plant has shown herself very stubborn, growing very slowy but healthy, I'll tame her eventually. Day 32 (12-10-2019) the little Dr seems to have kept up the growth pace, I see her growing remarkably more vigorously...👌 Fertigations, twice a day, getting 1200 uSm/cm in the run-off. Day 33 (13-10-2019) When I get an extra buck I'll change the extraction fan, Temperature is getting high inside the tent for this time of the year. 450 W (real power) from DIY led lights raise the temperature quite a few degrees in a 0.80x0.80x1.60 m tent. Day 34 last day of the 5th week. She's doing fine.

The second week of vegetation is going well! This time, I’ve decided to try the Green House Feeding BioEnhancer instead of BioBizz Root-Juice. I’ve had issues with the shelf life of Root-Juice in the past, so I’m curious to see how BioEnhancer performs. The plant is looking healthy now, but it had a bit of a rough start. I initially planted it in soil that was too heavily pre-fertilized, which caused the first leaves to turn yellow.😔 Thankfully, it recovered quickly and seems to be thriving now. 💪 To keep the plant as stress-free as possible during vegetation, I’ve decided not to train it for now. I want it to focus on strong, natural growth without any added strain. I’m excited to see how it progresses over the next few weeks—things are looking promising!🌱😊

Couple weeks from Toppin 🌱🎩🌈🍬

All is well. I'm continuing to feed 'bloom' nutrients every other time I water. I'm giving heavy calmag doses every time I water. I'm trying to take out any unnecessary vegetation that is preventing air circulation. Lights are all at about 85% intensity... I won't be turning them up any more than that. I have reduced my nitrogen load... By the end of next week I won't be giving any more nitrogen at all.

Got these transplanted to the rain science 3 gal bags and moved to a 4x4 in the basement where it's a little better environment in terms of vpd. I had a full bag of roots organic soil so I decided to do a soil/coco blend like I did with the current autoflower crop. I also topped every single one of em mid week. Once I get the flower tent all cleaned out and everything I'll be throwing these in there for bloom. Hoping this will be an even better grow than the last since I have both my arms back. I'm doing the update a little early since I was late on it last week, today (tuesday 9.10.19) is day 43 from germination and about day 39 from full sprout. Before this week they were under only about 185w in a 4x4 area so it's been slow growth so far. These are doing solid, some are a little small and bushy like the purple candy paint and the rocstar breath but not that they have some room to grow maybe theyll pick it up.

Less than a week left, I've been reducing nutes and will be flushing with ph'd water twice before harvest, everything is sticky, smelly, and some of these skinnier/weaker branches are bending from the weight of the buds now 😎 Pistils are mostly all changed now (trichs are looking cloudy as well) and the leaves on the Cheese are yellowing, looking like she's ready so is the GDP but not quite as much.. These Pineapple Skunk plants could probably go a little longer but I will be harvesting the whole tent on the 55th day of flower, monday the 8th. then they will dry in the tent (hopefully at 50% rh, 67 f) for a few days before trimming and jarring, cheers 😃