Começou a florir e fiz mais amarras nos dia 39 e 42

12/08/2021 Recovering from Neem oil over spray, New growth emerging. Day#4 I've noticed she has at least two tops maybe 3 !! Very interesting I will look more into this as I don't recall reading anything about its cause, is it inherent to genetics? Hmmm. The root and bloom has IBA in it, maybe thats why?

The Sensi Bloom pro is powder so it is 3 grams per gallon = 4 liters. The tent is starting to fill out but no frost yet. I just started the bud candy so that is what gives it the frost.

Yaprak temizliği bitkiyi strese sokmadan yapıldı . Birbirinden ayrılan dalların çogu şekil aldıgı için bitkiyi rahat bıraktım scroge cıkardım sıcaklık 28 nem 40 civarlarında . Yapraklar gozlenerek gübreleme yapılıyor pistiller gözüktü.

Meanwhile, our flowering cycle continues. In just one week, the plants have changed noticeably and are developing exactly as expected.

So this is how things are looking for for the Dark Phoenix at the end of Week 7 of Flower, finishing earlier than expected, I have uploaded a video for you guys with all the information. 👊🏾🌱💚

So now we got some better pics of the manifold out of the tent! Yay! You can see how I defoliated her to allow as much light into the center as I can. I am adjusting her spot in the tent so I can position another one in the center, which should be groovy as the stretch is now pretty much done. Supercropping?! What!? In the 4th week of flower?! I know right?! But check it out, it was initially a mistake. I was doing a little LST and a bend went a little too far. So I got the idea, since some growers supercrop early in flower anyways - I am going to go ahead and supercrop that entire plant where the branches are too long anyways! Woohoo! The theory being, it can grow even gnarlier and more potent buds, and new bud sites where the supercrop occurs. However, doing it at week 4 is a bit iffy! But, we will see - it could turn out super rad! Fingers crossed! I took pics of the bended branches so you can see just how far along I am in flower and how they are bent. We will definitely be keeping an eye on these. So that puts us officially at the following plant tests: 1 Topped Once (4+ cola) 1 Topped Twice (Manifold - 8 cola) 1 FIM (8+ colas) 1 FIM + Supercrop (8+ colas) Going to be fun to see how it works out! ✌️

12/8 - Here we are at the beginning of week 10. Her buds are starting to frost up and she is definitely bulking up more than her sister, but her sister has a longer projected flowering time-frame (Heavy Sativa vs Indica). Anyways, did some minor pruning for airflow optimization and to remove some unhappy leaves from her undergrowth. They weren't yellow, but they weren't getting enough light and it was showing. Haven't done much to her this week other than top her off with Tap every other day. Seems like her feed from last week was on point as her pH and EC were solid as the water level lowered. After her first top-off, her EC started to fall as she ate more (reflected in the lower ec in the res after topping off with tap). Tapered her down to 80% strength as she is moving further along in flower and should hopefully finish sooner than her sister. If she needs a bump in her EC, I may top off with full strength nutes, but I'm going to just wait and see how she responds. Breeder's timeline reflects a ~65 day seed-to-harvest, but I can assure anyone out there growing this strain in DWC that she will not be ready in that time-frame. Currently she is sitting on day 67 and still looks like she has another 2 weeks or more. I grew her in soil before and she was ready pretty darn close to her expected time-frame (~70 days), but this strain responds to DWC differently. She didn't have slow growth or anything; just seems like she will veg longer in hydro than in soil. Not sure why. Thanks for stopping by the garden, and, as always, Happy Growing!

Приветствую. Идём хорошо. Увидел небольшой недокорм, поэтому увеличил немного стимов. Организован новый бокс, в разы больше ))

Week 3 for the solo is officially complete. She's been growing with no trouble. Root development has been excellent. As you can see, I decided to mainline. Seeing as she's in a solo cup, I'm not too worried about stunting. I'm horrible at measuring the water intake, but the cup needs to be watered daily. It's as lite as a feather everyday.

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.

Day 39 and overdue and update!: Another slow week for the ladies and waiting on my finishing touches to the room before I can put the tanks in and let them get off to the flying start they want to do !. I have nipped the small 5th nodes out and been encouraging them to quadline a little but they are still too little to put the pressure on yet . Now time is more available I can get busy on this run finally. I expect some nice results with these genetics

Started my first round of topping this week. The Gold Leaf is looking healthy.

Did some cuttings on her, found some bugseggs not much It's been raining a lot but she won't be up for very much longer and I still hope for some sunny days😘

Week 7 begins. Removed some dead leaves and big leaves that were blocking light to the lower parts of the plant. Buds are getting big and frosty! Very happy with the plants development up to this point.

LJ 2Q24 Flower Week 6 Start of Week: - [Sun Aug 4, 2024, LJ 2Q24 36:F:6:1] - Plant Heights: [ 25, in] End of Week: - [Sat Aug 10, 2024 LJ 2Q24 42:F:6:7] - Plant Heights: [ 26, in] EC: 2.4. # Until Week 10 __ Sun Aug 4, 2024 LJ 2Q24 36:F:6:1 Add 7.5 ml of Dr. Zymes to 1 PT of Last Two Plants Feed (Ran out last night) THIS CHART FOR WEEKS 7 - DEHU Water, Reducing Lush Green (N), Eliminating Root Anchor + PSP, 1 Drop Beauvaria Bassiana Soluble __ Mon Aug 5, 2024 LJ 2Q24 37:F:6:2 RLA Week 6 +BioAg TM-7 Nik wonders if it might actually be a molybdenum deficiency w/ Lemon Jeffery. __ Tue Aug 6, 2024 LJ 2Q24 38:F:6:3    Environmental: - LightIntensityAvg: [ 836, µMol/m2/s] - TempAvg: [ 78.4, °F] - RHAvg: [ 65.7 , %] - VPDAvg: [ 0.90 , kPa] - EC: [ 2.4, mS] Note: - Nik @TheRootedLeaf mentioned Molybendum as an ESSENTIAL µNutrient participating in Nitrogen Reduction. - The BioAg TM-7 contains Mb, Apply @ 1 tsp/gal  __ Wed Aug 7, 2024 LJ 2Q24 39:F:6:4 __ Thu Aug 8, 2024 LJ 2Q24 40:F:6:5 Note: - We really need at least 2 Fertigations/day, @2000 & @0130 - We’ll water to saturation each event (10% Pot Volume, 440 ml/plant/event) - We need 440 * 2 * 7: 6.16 Liters,Need 1.62 Liters, Will mix 1.75 - Need to increase daily total from 1.5 to 2 Gallons - 1.1 L/Plant/Day - 440 ml/plant/event * 2 Per Event - Estimate Minimal Runoff - Pot Size 4.4 Liters - Saturation: 440 ml - 0% Runoff 1.75 Gal, 5700 ml, 814 ml - [x] Light Defoliation (as needed/lowers) Feed Chart for 1.75 Gallons Apply 440 ml/plant @ 2000 & @ 0130 - [x] Mixed! 2024-08-08T16:03:01-0500   __ Fri Aug 9, 2024 LJ 2Q24 41:F:6:6 - [ ] Collect Dehu Water - [ ] Water 440/plant @ 2000 - [ ] Water 440/plant @ 0130 880 ml/plant/day * 7 : 6160 ml, 1.62 Gal __ Sat Aug 10, 2024 LJ 2Q24 42:F:6:7

Si no haces nada especial para ti y actualizaremos para ti también y para siempre 😂

First time growing with autos and with leds

Geruch etwas weniger als erwartet trdm sehr sehr sehr geile terps bin gespannt wenn’s fertig gecured ist wie es dann schmeckt Leider nicht mein Fall trdm sehr geile Pflanze