The Grow Awards 2026 🏆 
Likes
Comments
Share
@BudBoutique
Follow
! this is my current status, gonna upload my last veg weeks within the next week - got a bit busy around Spannabis - thank you for your understanding! 💚
Welcome to Bud Boutique Grow Diary - really appreciate all your love and support :)
Dont forget to check out my other current grows!
🗓️ This Week:
after 48 hours of complete darkness (important for seedlings to make sure all plants switch into flower same time), I finally switched my lights to the 12/12 schedule and sent my ladies into the flower.
- This one Phenos super strong
- more than healthy and going well
- Day 3: Foliar spray with APTUS Regulator and APTUS Nutrispray to give them extra micronutrients and give them a little shell for protection.
! always use APTUS Regulator first and mix well with your water before adding any other nutrients for Feeding or Foliar!
Thank you for still staying with me 💚
___________________________________________
--- 🌱 Strain (Sponsor) ---
🏷️ Blue Cinderella 99 FF by MSNL
https://www.marijuana-seeds.nl/blue-cinderella-99-fast-flowering
--- 🥗 Nutrients and Feeding (sponsored by APTUS: APTUS Ambassador) ---
🍸 APTUS: full nutrient schedule extreme
-- Regulator, N-Boost, P-Boost, CaMg-Boost, K-Boost, Allin1 Liquid, Startbooster, Topbooster, Enzym+ every feeding
-- Fulvic-Blast, NutriSpray as Foliar each once a week
🔗 https://aptus-holland.com/
--- ♻️ Grow Control (Sponsor) ---
TROLMASTER: TENT-X + LM14 Light Adapter to dim/sunrise/sunset lights + Temp & rH Sensor all remote on App
🔗 https://www.trolmaster.eu/
--- 🏭 Grow Setup ---
💡LUMATEK Zeus Pro 600
* 🏠🌿 Indoor: Homebox 120x120x200cm (4x4)
* 📐🌀 PrimaKlima exhausting Fan 1180m3/h (running on 60-80%)
* 🌀 Can Light Filter 800m3/h & 1x Fanbox 1x Dyson fan for Air circulation
🔗 https://lumatek-lighting.com/zeus-600w-pro-29/
🔗 https://primaklima.com/de/shop/ventilatoren-de/ec-ventilatoren/pk160ec-tc/
🔗 https://canfilters.com/products/filters/
All Likes and comments are highly appreciated!!!
👨🌾 don't forget to check out my Instagram for daily educational content: budboutiquee
- Bud Boutique
Likes
16
Share
@HowtoBubatz
Follow
As the plant enters the fifth week of flowering, the first trichomes have begun to form.
The buds have started to thicken considerably during this week. They are becoming denser and more robust, which indicates that the plant is channeling its energy into producing larger, more resinous flowers.
Throughout the growth process, the cannabis plant has shown no signs of health issues.
It has remained vigorous and resilient, with no observable deficiencies or diseases.
To ensure optimal light penetration and airflow, the plant was lightly defoliated this week.
The cannabis plant is progressing well in its fifth week of flowering.
The formation of trichomes, the thickening of buds, and the plant's overall health are all promising indicators of a successful flowering phase.
Likes
2
Share
@Avengergreen
Follow
Začínam tretí týždeň vegetatívneho obdobia. Rozhodnite sa použiť aplikáciu Boom Boom od Biotabs. Ďalšia aplikácia o 14 dní.Today marks the end of my third week of vegetative growth. The plants are already starting to flower. Starting tomorrow, I will start applying fertilizers for the flowering phase.
Likes
3
Share
@Mett420
Follow
Effettuato topping, lst con clip e defogliazione degli strati più vicini all internodo (questo la settimana scorsa), e si può vedere un importante espansione delle foglie e irrobustimento degli steli. Tagli e tecniche necessarie per questo tipo di genetica e setup
Likes
6
Share
@GoldenWeedGrower
Follow
Legend
Timestamp: 📅
EC - pH: ⚗️
Temp - Hum: 🌡️
Water: 🌊
Food: 🍗
pH Correction: 💧
Actions: 💼
Thoughts: 🧠
Events: 🚀
Media: 🎬
D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING
______________
📅 D57/B20 - 11/06/24
⚗️ EC: 1.0 pH: 6.1
🌡️ T: 25°C H: 70%
🌊
🍗
💧
💼
🧠
🚀
🎬 1 TL video
______________
📅 D58/B21 - 12/06/24
⚗️ EC: 1.0 pH: 6.4
🌡️ T: 25°C H: 80%
🌊 8 L
🍗 Calmag - Bloom A-B
💧
💼
🧠
🚀
🎬 1 TL video
______________
📅 D59/B22 - 13/06/24
⚗️ EC: 1.2 pH: 6.6
🌡️ T: 25°C H: 70%
🌊
🍗
💧
💼
🧠
🚀
🎬 1 TL video
______________
📅 D60/B23 - 14/06/24
⚗️ EC: 1.0 pH: 5.8
🌡️ T: 25°C H: 70%
🌊 15 L
🍗 Calmag - Bloom A-B - B52 - Big Bud - Bud Candy
💧
💼 Spinosad and pH-
🧠
🚀
🎬 1 TL video
______________
📅 D61/B24 - 15/06/24
⚗️ EC: 1.0 pH: 5.8
🌡️ T: 25°C H: 70%
🌊
🍗
💧
💼
🧠
🚀
🎬 1 TL video
______________
📅 D62/B25 - 16/06/24
⚗️ EC: 1.0 pH: 5.5
🌡️ T: 26°C H: 80%
🌊
🍗
💧
💼
🧠
🚀
🎬 1 TL video
______________
📅 D63/B26 - 17/06/24
⚗️ EC: 1.0 pH: 5.2
🌡️ T: 26°C H: 80%
🌊
🍗
💧
💼
🧠
🚀
🎬 1 TL video
Likes
28
Share
@DreamIT
Follow
Sponsored by:
🎭ZAMNESIA SEEDS🎭-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️
28/7 has already recovered well after the cut, fantastic!
2/8 it reacted well to the cut and the cloning seems to have been successful. Thursday comes into bloom
__________________________________________
Personal advertising (contains affiliate links)
__________________________________________
🦄Zamnesia boasts the most complete and accurate site where you can find everything related to cannabis and the "psychedelic" world. Autoflowering, feminized seeds, mushrooms, salvia divinorum, afrodisiacim of everything, and more! ( no affiliate link)
✅https://bit.ly/Zamnesiaseeds
__________________________________________
Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄
🤯 And with the code "dreami t" you will immediately receive a 15% discount on your purchases
✅https: //bit.ly/GreenBuzzLiquidsPro
__________________________________________
👀 Are you looking for a good lamp to start with? 👀
🌞Viparspectra has something more than the others, take a look at their site.
⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount
👀 Search for it on Amazon
✅Amazon USA: https://amzn.to/30xSTVq
✅Amazon Canada: https://amzn.to/38udUVe
✅Viparspectra UE: bit.ly/ViparspectraUE
✅Viparspectra USA: bit.ly/ViparspectraUS
______________________________________________
🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links)
✅https: //bit.ly/Wedryer_
______________________________________________
📷🥇Follow the best photos on Instagram 🥇📷
https://www.instagram.com/dreamit420/
Backup
https://www.instagram.com/dreamit4200/
🔻🔻Leave a comment with your opinion if you pass by here🔻🔻
🤟🦄💚 Thank you and good growth 💚🦄🤟
Likes
39
Share
@PabloTheGrower
Follow
I cant believe how FAT Mimosa got. Looks like it's on a McDonald's only diet...big, juicy and shiny this one is.
The fade is on half way alredy and despite i cuted a couple of branches on the Apple&Bazookiez, I've decidid to let it go another week. Colours on this one are stunning. Red and purple buds and fades all over. Despite the slim rock hard nuggets i believe the thc and terpenes are going to make up for the lack of weight.
They have been on straight ph water for the last 2 weeks and thats how they going to be for the last 1 and 2 weeks respectively.
See you on next Sunday.
Good grows🌲
Likes
2
Share
@Albanymedicinalgarden
Follow
Pleasure to grow. Low maintenance in super soil setup in 5 gal cloth pot. Stayed small and compact but frosted up early and heavily. No deficiencies, steady growth, no training needed. Even minimal LST (which I did not do), would surely increase yield but I was more focused on quality and letting it do its thing. Genetically, it was determined to grow a perfect little canopy while not taking up much space, about as low maintenance as you can get on a plant imo.
Running autos is still a limited thing for me, I like the idea of having keeper clones of photos as this is all for personal medical use, but this plant was fun to grow, true to form and stable as heck. I have a few seeds left and I’ll definitely save them for an outdoor run down the line
Likes
25
Share
@FabioFobia
Follow
Alla fine ho optato per terminare tutta la decima settimana di fioritura facendo 3 giorni di flushing 2 giorni di solo acqua piovana e 2 giorni senza acqua e senza luce...in fine per garantirmi un essiccazione più lenta ed omogenea stò provando ad appendere le piante sane lasciando foglie e rami...probabilmente la temperatura oscillerà tra i 17 e i 19 gradi e l'umidità trà il 55% e il 70%....mi auguro che tutte le scelte da me fatte mi portino ad ottenere un buon prodotto.
Immagino che ci rivediamo la prima settimana di Febbraio per la conclusione del diario, intanto grazie a coloro che mi hanno seguito in questi 4 mesi....GROWDIARIES è un grande stimolo a fare meglio
Likes
48
Share
@StarfishSmallBatch
Follow
This week I am still working on my slow defoliation, to get some light intake to some of the node sites, while putting the plant under as little stress as possible. I've still been using the molasses, Mykos WP and Fish Sh!t mix every other watering. I also top dressed another 1/4 teaspoon of BioAg TM-7, which once again seemed to help both plants keep their leaves held up longer between waterings. I assume the TM-7 is improving the water retention of the Build A Soil Lite I'm using. I still have the Viparspectra 100w boards, set to about 30% power kept about 14 inches away, this seems to be a good spot for the plants. I'll probably be taking the bottom branches off and cloning them this week, so I can back up these genetics.
Update: I went ahead and cloned these ladies to back them up, they are my first plants from seed, so I wanna keep the genetics if I like the flower! I used clone-x, root riot cubes, my AC infinity Germination Kit with 80w led bar on setting 2. I sprayed the clones and inside of the kit with distilled water. Hoping I get some clones rooted soon!
Likes
11
Share
@tangie
Follow
Chopped her two days into week 14.
What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim.
What more can I wish for? I am a very happy man.
Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄
✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day.
Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?
Likes
37
Share
@HerbalAbuser
Follow
So week 5 has started. This week should be flowering week but shes taking it slowly. She looks lovely and healthy tho. This week I start adding bloom fertilizer to her solution. I like the way she stayed low and bushy. She has around 8 colas with this small size. I am trying to rotate the fan leaves with sticks so the lower colas can see the light directly. Almost everyday I am doing some changes with her LST. Main stem grew vertical nicely just as I wanted. But still I couldnt fill all my coverage area. Maybe because of the strain itself, or my low power lights, or 12/12 start light cycle. Probably all of them affected her size.
Day 30.
Switched one of the 6500K bulb with 2700K. Now its 2x6500, 2x2700. And the 300W LED ofc.
a short 1 hour timelapse. I need a bigger memory card so I can make a proper timelapse
Day 31.
Changed this week to flowering week. I can see shes focusing on her pre-flowers lately. Each day i can notice they grow taller. Changed another 6500K bulb with 2700K. Was waiting for next week but seems she is ready for full flow mode.
You can see her curvy body on pictures. It looks really nice imo. Middle buds already as big as main cola now.
Day 35.
Last day of week 5. Fed her today and this time I add 1ml/l Top-Max.
There are some small burns on random areas. Some are on edge of the leaves while others are in the middle like small dots. I guess they are light burn. No big deal hopefully.
The first leaves on the bottom of her main stem are drying and dying. I think thats normal. Everything else seems pretty healthy. She is filling 30x25 cm area while my coverage area is 40x40cm. Not too bad but next time I will train it better for sure.
Watering every 2 days with around 500ml water. And feeding between 2 waterings so every 6 day.
Likes
32
Share
@TenerifeCultiva
Follow
Esta semana se hizo el trasplante a media semana el video es de justo antes en el siguiente diario ya estarán en sus nuevos recipientes. Combatimos calor como siempre
Likes
15
Share
@valiotoro
Follow
I can’t upload the week comment…
Screenshot🔝
See you soon for the Banana Purple punch in coco😈
Processing
Likes
6
Share
@eldruida_lamota
Follow
Y hasta aquí, el corte última semana ya de todo el proyecto, solo queda tijera en mano y esperar para catarlo.
Os muestro mi zona de trabajo en un video 🤷♂️ Para mi consumo justo
Likes
31
Share
@JeyGanesha
Follow
Ztrawberriez mi sta stupendo anche lei..come sempre , complimenti alla banca semi fast buds,che AD oggi trovo da loro le mie genetiche preferite...ma quest'anno proverò altre banche perché ho visto che anche le altre un hanno genetiche valide.....w.w.w.la ganjah 😂😉
Likes
5
Share
@grazi2706
Follow
Another good week, just waiting for them to ripen. I'm planning on another week. That will put us at 9.5 weeks and they should be good to go.
