Likes
Comments
Share
Discovered a magnesium deficiency this week. Flushed and added Epsom salts
Likes
49
Share
@AsNoriu
Follow
Day 65. Heavy training in progress ... All done, hopefully not many natural protectors lost, took about 30 liters bag full off leaves and shoots, could do like 100 clones easy ;))) All girls lolitoped, cleared, defoliated, rewired, some had supercroping. Skunks were happy when last Cheese was done, so i think/hope - all will go smooth. This time i really cleared them a lot, maybe the most in my career ... Cheeses performed thicker and more stacked branches . Fun is starting !!! Day 66. Got my last puzzle of protection against thrips. I think i beat them already, yesterday haven't noticed any thrips on leaves, but i am old and blind ;))) They where ordered a week ago, so just in case ... Girls look just fabulous !!! I think it will be very nice harvest by bag appeal, hopefully weight will make me smile too ;)))) I still think to strip them hard at the end of week 5 or week 6 if they will delay in progress .... At the moment they are just perfect ! Day 69. Here comes my moan ;)) Stretch was not so big as i expected, looks like 80 is more real target than 100. They look very nice and healthy and i beaten thrips , but this time i cleared too much i feel ;))))) Future will show ... Happy Growing !!!
Likes
300
Share
@Ju_Bps
Follow
Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Girls keep growing on this last veg week. Down the EC, don't need to much. 💪 Continuing Defoliation, lst, preparing scrog and daily fighting with this big leaves 😅 💧 Give water each 2/3 day And vaporise plant with water + Plagron Roots (1ml/l) 1.5 l Water + Roots + Grow + Zym + Sugar Royal (1 + 4 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 43% 43 cm Mars Hydro Fan kit Setting 4 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - Tropicana Cookies FF🌲🌲 https://2fast4buds.com/us/seeds/tropicana-cookies-fast-flowering
Likes
41
Share
The buds are fattening up this week and some hairs are turning orange on the bigger buds. I’m guessing I’ll have to harvest this one in stages looking at the bud development now. The buds are beginning to smell very strongly. Some large ones are having difficulty standing up so I imagine I’ll have to secure them in the next few days. Trichromes are clear and the sugar leaves are getting frostier and frostier each day. I’m estimating harvest first week of April so I’ll begin flushing next week.
Likes
Comments
Share
Likes
5
Share
@Weedseed
Follow
Llevo poco tiempo pero la verdas que bastante bien, cada vez vamos aprendiendo mas
Likes
22
Share
@Aeromax
Follow
5/5 Topped all the plants Received FloraFlex nuturients. Already started sprayin with VegFoliar 7/5 Started FloraFlex V1/V2 0,4g/l 9/5 Moved plants to a new veg space where i will keep mothers 🙌 I got 2 new reg strains in there. That's a L.A. Kush Cake and a Skywalker OG. Both found while rolling 😅
Likes
9
Share
Last run of the growing season. Biscotti Mintz by Barney's Farm. I wasn't satisfied with the last crop's yield so i wanted another crack at it. This time I'm armed with a digital Lux meter so i can better dial in the light without the guesswork. Looking to start the clones off with between 5000 and 7000 LUX at the canopy. But i didn't like the brightness at 8000 so i upped it to 15,000 Lux. I think the 5k to 8k Lux recommendations for clones was for clones in the process of rooting. Recommended Lux values for vegging plants is between 15,000 and 50,000 Lux. They were very lanky with long internodal spacing which I thought might be insufficient lighting. Because the other Biscotti Mintz grows and research i've done, shows a very bushy indica trait growth pattern. So either i have a shitty pheno, or my lighting wasn't good enough. I'm guessing it was the light because preliminary testing with the Lux meter showed that my canopy was quite under lit last run. Again using 3 gallon pots, this time i am crossing my fingers with the substrate because it is reused coco that i washed and buffered myself. I've never done this before so i have no idea what's going to happen. For all i know they will all be dead in a few days lol. Anyways, i tested the coco pH last night, and after buffering with 2x strength calmag and soaking the coco in a 6.0 pH for 48 hours, the pH is sitting around 6.8 in the coco. Not where I wanted it, but it's doable. I believe the coco brand new out of the bag measures at 6.8 so... I will be watering in 6.0 pH to try to achieve a balance. Treating the roots before planting with Azos and dusting the planting hole with Mykos. The nutrient solution is very mild to start off. About 450ppm. Hygrozyme will be added to the mix and watered in to help break down the old dead root matter that wasn't able to be sifted out of the coco. The cellulase will break those roots down into usable food for the plant to uptake, and clean up the dead roots at the same time. Hygroben will also be added because i have some left from the last crop. And after seeing the results of using bacteria, i'm pretty sold on using it. Today is March 4th, 2024. I like to start on the first of the month but i like starting on Monday's better for keeping my weed soaked brain organized a little easier. I'm thinking to do half strength doses 2x per week instead of full doses 1x per week. It's twice the mixing, but that's ok. There will be 7 plants in total, and the experiment i am running this time, for anyone that wants to check out, is 1 of the plants i will do a seriously severe defoliation on while leaving the rest untouched. And we'll see how it plays out yield wise. I'm sure of the outcome already, but I'm tired of the babbling dummies all over the place that preach fan leaves fan leaves... So we shall see! I had the pH of the nutrient solution set to 6.0 but after adding the enzyme and liquid bacteria, the pH dropped to 5.78, so beware of that if you use those products, even though they claim not to affect the pH. The light dimmer is set to 6 of 10. The clip fan is set to 2 of 10. Temps set to 74F and humidity set to 70% humidity. The light is 18 inches from the canopy at a dimmer setting of 6, which gives the canopy 15,000 Lux. Each plant was gently watered with about 300ml of nutrient solution, which was carefully and gently dispensed with a 140CC syringe Hope they like what i've done with the place lol. P.S. I realized that the 5000 to 7000 Lux was for clones that are rooting. So I had the lux at 12,000 at 18 inches from the plants at a dimmer value of 5. I've now upped the dimmer to 6. Tomorrow i'll check the lux and see where it's at. The clones have just come out of the dome today so i don't want to push them too aggressively too fast. MARCH 5, 2024 I just tested the Par light reading on BM #1 and the BM right in the center. BM #1 Par reading is 247. Center plant is 270. Light dimmer is at 6 and light is now 13 inches from plant canopy. MARCH 9, 2024 Fed again today. There is some progress in growth. 1/2 inch increase. The clones have been upset getting adjusted to their new environment. I've upped the dimmer to 7 and the PPFD and DLI numbers are good. Humidity remains set at 70% and temperature is set to trigger the fan at 78F Light remains where it was so the plants have grown 1/2 so the light will be 12 inches above the canopy. Mixed up 2 liters of nutrients and the ppm was 555, and the pH was adjusted to 6.15. 2ml Per liter of hygrozyme and hygroben were also added. Clones have curled leaves and a perky/droopy stature. The leaf edges are browning a little bit. I'm not sure whats happening with them other than it's just the effects of transplanting and drastic environmental change. What i'm wondering is how they will/are reacting to the used coco underneath? We press on with fingers crossed! 🙏😁
Likes
29
Share
@Pr3m_85
Follow
Start pk 13-14 and boost this week. Peace to all ✌️🏼✌️✌️🏽✌️🏻✌️🏾✌️🏿
Likes
23
Share
@DevelGrow
Follow
Schöne Pflanze,auf 15-85 geerntet! Big Buds Verströmt einen schönen starken leicht fruchtig aber in Menge stinkenden kush Geruch! Beim Trimmen wer es kennt wie frische Baby 👀💩
Likes
30
Share
Likes
7
Share
@Rangaku
Follow
Pulled her out of the tent with a 10% amber trichomes, she’s megga frosty and sticky . Bit different this one from others of grown but uniquely brilliant. Buds are dense as anything , and from the sneaky smoke I had she’s potent as . I’ll add some more pics once I’ve trimmed the buds up and got em hanging.
Likes
4
Share
Just fed her water this week. Stretch is real in this week. Gheeez 😩
Processing
Likes
21
Share
@GRow_M8s
Follow
* Starting this week with a final 🍃 defoliation, the plants responded really great after every training (LST, defoliation, lollipoping), eating and drinking like real champs 🏋️‍♀️ 🧗‍♂️. * Humidifier 🌪️ makes a real difference, through low humidity (40%-50%) we achieved better VPD -> more transpiration -> faster growth, the plants enjoying it. * Gemma's crystalize NPK for bloom, collaborates with the others boosters with no problem (reccomend separate mixtures when feeding). ℹ️ You can see the response on the plants after one day --> updated photos ℹ️ Later this week : The plants eating like beasts, watering almost every day, Buds progressing smoothly, Smells too and the canopy is pretty good in this (0.80m ×0.80m ×1.60m tent size) we are impressed with transpiration rate, game changer the humidifier present.
Likes
4
Share
Hacemos domingo 4 mayo te aireado y echamos 22 gr de top dress
Likes
2
Share
Hallo zusammen! 👋🍑 Auch meine Apricots entwickeln sich in Woche 10 genau in die Richtung, die ich mir erhofft hatte. Von Woche zu Woche werden die Veränderungen deutlicher und langsam beginnt die eigentliche Magie der Blütephase. Die Pflanzen haben in den letzten Tagen sichtbar an Masse gewonnen. Besonders die Hauptcolas werden immer kompakter und beginnen sich Stück für Stück zu verdichten. Gleichzeitig legen auch die zahlreichen Seitentriebe ordentlich zu, wodurch überall gleichmäßig schöne Blüten entstehen. Besonders beeindruckt mich in dieser Woche die Harzentwicklung. Die Sugar Leaves sind mittlerweile nahezu komplett mit Trichomen überzogen und die Blüten bekommen diesen wunderschönen frostigen Look, der von Woche zu Woche intensiver wird. Man merkt, dass die Pflanzen jetzt ihre Energie voll auf die Blütenproduktion konzentrieren. Trotz des wechselhaften Wetters entwickeln sich die Apricots weiterhin ausgesprochen stabil. Die Blattfarbe ist gesund, das Wachstum bleibt kräftig und die Blüten schieben täglich neue Kelche nach. Dadurch werden die Colas immer massiver und gewinnen kontinuierlich an Volumen. Ich bin außerdem sehr zufrieden mit der Struktur der Pflanzen. Durch das Training gelangt ausreichend Licht bis in die unteren Bereiche, sodass selbst kleinere Budsites hervorragend mitwachsen. Genau das sorgt dafür, dass sich nicht nur die Spitzen, sondern nahezu die komplette Pflanze gleichmäßig entwickelt. Auch der Duft verändert sich inzwischen deutlich. Beim Berühren der Blüten bleibt ein intensives, süß-fruchtiges Aroma an den Fingern zurück, das bereits jetzt Lust auf die Ernte macht. Jetzt beginnt die spannendste Phase des gesamten Grows. In den kommenden Wochen werden die Blüten weiter anschwellen, die Trichomproduktion wird noch einmal deutlich zunehmen und ich bin gespannt, welches Potenzial die Apricots bis zur Ernte noch entfalten werden. Ich freue mich schon auf das nächste Update und wünsche euch allen weiterhin eine erfolgreiche Grow-Saison! 💚🌱 -------------------------------------------------------------------------------------------------------------------------------------------------------------------- Hello everyone! 👋🍑 My Apricots are continuing to develop beautifully in Week 10, and every new update makes the progress even more noticeable. The flowering stage is now entering one of the most exciting periods. Over the past week the plants have gained noticeable size and density. The main colas are becoming thicker and more compact, while the numerous side branches continue stacking flowers, creating a very even canopy filled with healthy bud sites. The biggest highlight this week is definitely the resin production. The sugar leaves are now heavily coated with trichomes, giving the buds a beautiful frosty appearance that becomes more impressive every day. It's clear that the plants are now directing most of their energy into flower production. Despite the changing outdoor conditions, the plants continue to perform extremely well. The foliage remains healthy, growth is vigorous, and fresh calyxes continue forming throughout the flowers. As a result, the colas are steadily becoming denser and gaining more weight week after week. I'm also very happy with the overall plant structure. Thanks to the training, plenty of light reaches the lower branches, allowing even the smaller bud sites to develop into well-formed flowers instead of remaining underdeveloped. This creates a much more balanced plant with quality buds throughout the entire canopy. Another thing I've really started to notice is the aroma. Every time I inspect the flowers, they release an increasingly rich sweet and fruity scent that already gives a small preview of what the final harvest might offer. The most exciting stage of this grow is just beginning. Over the coming weeks the buds should continue swelling, resin production will increase even further, and I'm really looking forward to seeing how much these Apricots can still develop before harvest. Thanks for following along, and I wish everyone a fantastic growing season! 💚🌱
Likes
16
Share
@Weed_nerd
Follow
she grows well but is a bit saggy at times. should take and clean out of it a little it is a little dense and also train out branches a little more .but I am happy with it