Vote Now 🏆 for the Grow Awards 2025!
Recommended
Likes
Comments
Share
another resin monster from seedstockers, with a very special scent, full of flavors! grinded it smelled like peppermint, and vaped it has a great sweet creamy taste!
Likes
13
Share
@SgtDoofy
Follow
March 18 Sherbet has the tent to themselves now. I've flipped to a 12/12 flowering light schedule for Sherbet. You're supposed to imagine what the current plant looks like doubled in size, and flip to flowering according to what you think your tent could handle. The other tent is larger than this one, but it's in a much colder room, so having 12 hours without the heat from the lights could have been harsh for the plant. This room can hover around 50-60F on cold nights, so Sherbet will just stay in this tent to grow. Temps have lowered 5+ degrees by removing the other plant and it's light.
Likes
7
Share
@BIYEI
Follow
Floracion (Tiempo estimado 64 dias) Decima Semana de Floracion 11/03/2024 - 5:00hrs y 22hrs: Se hace cambio de cubeta y solucion, Se hace Lavado de cubetas, tuberias, bomba, humificador, y perifericos, Se realiza limpieza completa del indoor, Se verifican parámetros básicos del agua, mantener cuidados específicos, el olor empieza a ser mucho mas penetrante con solo abrir el indoor se nota el aroma muy delicioso, empiezan a observarse mas el crecimiento de los Cogollos. Agua de osmosis: Ph 6.0, PPm 550-750, Ec 1.2-1.4, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 55%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 12/03/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 550-750, Ec 1.2-1.4, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 55%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 13/03/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 550-750, Ec 1.2-1.4, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 55%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 14/03/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 550-750, Ec 1.2-1.4, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 55%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 15/03/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 550-750, Ec 1.2-1.4, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 55%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 16/03/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 550-750, Ec 1.2-1.4, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 55%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad. 17/03/2024 - 5:00hrs y 22hrs: Se verifican parámetros básicos del agua, mantener cuidados específicos. Agua de osmosis: Ph 6.0, PPm 550-750, Ec 1.2-1.4, Temperatura 18°C - 24°C Ambiente: Temperatura 19-25 °C, Humedad 55%, Ventilación 20%, 12 hrs de luz , 12 hrs de obscuridad.
Likes
Comments
Share
Likes
19
Share
Hello / Good night after having passed difficult tests in terms of cloning we have 16 cloned after 3 weeks of growth we are leaving for flowering we are very happy today to be the long live green 🍀
Likes
5
Share
@SgtDoofy
Follow
March 18 I've moved the plant to a separate tent from the other, so that I can flip that plant to 12/12 light schedule for flowering. That plant is going to need all the space it can get too. This second tent is quite a bit colder being in a different room with only one grow light. For now I'm going to default to a 24 hour schedule, but will soon be switching to a 20/4 schedule to give some sleeping time. We're just about ready for another round of feeding either tonight or tomorrow.
Likes
92
Share
@Krisis
Follow
03/18/24. Entering week 4 wow. Times flying. Nothing really interesting to update on. #2 is driving me crazy. It seems like she’s always getting upset about something. When I think I figured her out.. she’s like nah, here’s some other strange leaf issues. The other 2 seem perfectly fine. Im thinking now maybe from me cutting back on food before because she seemed over fed-now she’s too hungry. Her leaves seem a bit pale in certain areas now with tiny reddish coloring on edges. Aside from that it seems like she’s still doing her flower thing. All 3 seem frosty and the leaves are sticky and smelly lol. Going to feed #2 a bit heavier than the others for now. Forgot on post earlier to say- Light at 18 above at 75%
Likes
6
Share
The progress is real! On the 14th, all seeds had germinated. The difference of 4 days is, for me, unreal. I will keep you guys updated. See you soon
Likes
114
Share
@Natrona
Follow
**************Sponsored Grow*************** Hello friends and followers to my weekly Titan F1 update: 3/10-16 This week is mostly coasting and keeping my girls happy. I'm still not smelling Titan fragrance in the tent unless I get close. T2 is filling out and needs defoliation. I'll do that next week probably for both Titans. NOTE** even though a 2 liter pot is often used in SCROG set-ups, the narrow neck at the top of my tea pot makes it very difficult to pin limbs or trim. For these Titans, I water 1- 2 liters every other day. Most of T2s (teapot gal) water (1ltr) runs thru to the bottom catchment. I leave it on the towel to keep humidity around the pot. This week both gals did some yoga and stretched some more. T2 is now 4.5 inches. T3 also grew some more. When I topped her, she was 6 inches and now 7.5 inches. Bud stacking continues giving more height. One other thing. I'm using AC Infinity T700 humidifier. I dont like that it spews moisture on my plant leaves leaving a white residue. You can see height & water residue in the profile pics. I'm using TPS1 @15 ml per gallon. I fed at approximately 950ppm this week. The PPM is on the low end of mid-bloom ppm which I do with autos since they are sensitive to too many nutrients and my early grows of autos were over fed. TPS1 10 ml/gal in 3 gal Recharge 5 ml/gal in 3 gal Calmag 5 ml/gal in 3 gal RQS says harvest 70-75 days or 40-45 days of flower. My calculations – harvest of T3 will be April 13-18 and T2 15th-20. Based on the size of my gals, and the number of bud sights, I’m only estimating an ounce between both plants. This is one time I hope I’m wrong. Given these RQS Titan are F1 hybrids and should be stable, I believe the height and the health differences are attributable to the copper wire teapot. They are in the same soil, same tent environment, same nutrient solution, same light, same everything except the growing container. As I stated in previous discourse, I expected the overall plant to be smaller than T3 simply based on the pot size but did not expect to see such size differences so early, not to mention the nutrient issues. Thanks for the visits, likes and comments, I appreciate all the plant love💚. Have fun & love what you grow 💚 Sending love and light 💫 💫Natrona 💫 **************Sponsored Grow*************** Royal Queen Seeds is the first to off genuine F1 cannabis seeds. F1 hybrids are the future of cannabis genetics, offering unrivalled stability, vigor, and yields. They have eight (8) F1 hybrid strains including a CBD. Unlike regular hybrids, which can be created by crossing virtually any two cannabis plants, F1 hybrids are made by crossing two pure (also known as "inbred") genetic lines. The resulting seedlings not only grow bigger and stronger, but also maintain stable growth traits that result in a uniform crop. In Rocket to the moon, I grew one Apollo F1, (please refer to my diary for full details). Huge base stalk, strong stems, remained under 3’, and yielded over 4 ounces. They have come down in price since their introduction. I was so impressed by the yield and growth of Apollo, I strongly urge you to look at the site for a variety that has what you are looking for. I would like to express my sincere thanks to @James at @Royal Queen Seeds for giving me this opportunity to grow their quality seeds. It was a hard decision to select the strain to grow; I’m excited to grow Titan F1. ==================================== Royal Queen Seeds Https://www.royalqueenseeds.com use Discount Code use **GROWERS20** for 20% discount Titan F1 stands out as one of the most potent options in F1 hybrids. Thanks to her genetic lineage, she produces sky-high levels of THC and boatloads of delicious terpenes. Plus, plants reach modest heights while churning out impressive yields. Talented breeders created this F1 by crossing inbred lines that share a heritage with Blue Dream, Sugar Magnolia, and Amnesia. Effects, Flavors, and Aromas of Titan F1: Powerful Effects and Sugar-Citrus Notes Titan F1 will treat your olfactory system throughout the flowering phase, and beyond. This auto flowering variety unleashes a powerful terpene profile consisting mostly of myrcene, farnesene, ocimene, pinene, bisabolol, and limonene. Combined, these aromatic compounds offer notes of fruit, candy, and lemongrass. With the highest THC concentration within our F1 hybrid range, Titan F1 exerts a powerful and fast-acting effect that melts the muscles and clears the mind. Perfect for enjoying after a long day at work. Growing Titan F1: Stealthy, High-Yielding Plants With an average height of 65cm, Titan F1 can grow just about anywhere and maintain a low profile. This bushy plant features an indica morphology, a huge trichome count, and develops into a mature specimen in around 73 days from germination. Gear up for a uniform, consistent crop that will thrive in practically any environment. Titan F1 data sheet Variety: F1 Hybrid auto Genetic Background: Blue Dream x Sugar Magnolia x Amnesia THC: Ultra-high Yield: XXL Height:55 - 75 cm Flowering time:40 - 45 days Harvest:70 - 75 days after germination Major terpenes: Caryophyllene, Farnesene, Myrcene, Ocimene Effect: Calming, Focus, Physically Relaxing, Uplifting Flavor: Candy, Diesel, Herbal, Pine, Vanilla Climate: Short Summers ================================= Equipment: AC Infinity CLOUDLAB 844 – Advance Grow Tent 48”x48”x80” CONTROLLER 69 PRO – Grow Tent Controller CLOUDLINE LITE 6 - Inline Fan 6" IONBOARD S44 – LED Grow Light Board 400W CLOUDRAY S6 – Oscillating Circulation Clip Fan Carbon Filter 6” Pots: 2 liter wire basket tea pot 3 gallon Air pots Soil Fox Farm Happy Frog Amended with worm castings, dolomite lime and mychorihiza Seeds provided by Royal Queen Seeds Https://www.royalqueenseeds.com use Discount Code use **GROWERS20** for 20% discount Nutrients: Total Plant Solution TPS1 Canopy Signa
Likes
11
Share
@PanGrower
Follow
Do not pay attention to the temperature on the thermometer in the middle, it lies by a couple of degrees. I have a good thermometer on top of the box that shows the temperature. Day 29: After a terrible fracture, we see that the plant is beginning to recover. I'm honestly disappointed because it makes it very difficult for me to train mainlining and it will also increase the amount of time it takes to grow. Day 30: It looks much better already, I could superprune the right branch, but I don't want to stress it. I will try to bend the right branch harder, I will bend the left one a little in the morning the next day, maybe early. Day 31: This morning I cut the lower leaves, photo in the evening and continued the LST training after the injury. Photo in the evening. Day 32: I am completely sure that the plant has moved away from the stress, but we can see on the left circle, the right bud (and side) slowed growth. Day 34: I saw traces of salt on the tips of the new leaves, so now I pour water with regular 15 PPM.
Likes
11
Share
@PanGrower
Follow
Do not pay attention to the temperature on the thermometer in the middle, it lies by a couple of degrees. I have a good thermometer on top of the box that shows the temperature. Day 29: After a terrible fracture, we see that the plant is beginning to recover. I'm honestly disappointed because it makes it very difficult for me to train mainlining and it will also increase the amount of time it takes to grow. Day 30: It looks much better already, I could superprune the right branch, but I don't want to stress it. I will try to bend the right branch harder, I will bend the left one a little in the morning the next day, maybe early. Day 31: This morning I cut the lower leaves, photo in the evening and continued the LST training after the injury. Photo in the evening. Day 32: I am completely sure that the plant has moved away from the stress, but we can see on the left circle, the right bud (and side) slowed growth. Day 34: I saw traces of salt on the tips of the new leaves, so now I pour water with regular 15 PPM.
Likes
Comments
Share
Likes
Comments
Share
Likes
Comments
Share
Likes
80
Share
@Roberts
Follow
The Pure Ice cream clone is doing great. I did catch the mutation from the mother plant. The whole plant but 2 leaves is light green vs what it would be as seen in picture. I wonder if it will effect the bud quality 🤔 . Anyway she has been drinking and consuming large doses of nutrition with ease. She looks like she is gonna have a good yield on the clone. Thank you Pure Instinto, and Spider Farmer. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
44
Share
@Roberts
Follow
FBT2402 is hanging in there. She has had a rough life so far. She is flowering though. I did a solution change on her yesterday, and just corrected the ph today. Hopefully everything is gonna keep hanging on. The end is getting closer. Thank you Fast Buds, Medic Grow, and Athena. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g If anyone needs to purchase fastbuds here is a link for my affiliate program https://myfastbuds.com/?a_aid=60910eaff2419
Likes
39
Share
Day 29 an her topping went well .. she been a slow grow but that had been on purpose... I just simply have no room for her at the moment so I just started giving her food like 2 days ago.. I topped her the other day and that's the first of many ... this is gonna be a plant I veg for a while.. I have the time and I want to get 4 or 5 sets of toppings in .. this is my first photoperiod indoors ( grew one once outside) so I wanna play with this .. I'd like to get atleast a half pound of this Jamaican landrace ! Happy growing everyone and thanks for stopping by! All likes and comments are appreciated! ✌️
Likes
104
Share
@Hou_Stone
Follow
Photo taken on day 67 / Flowering 35 ------------------------------------------------------------ 💧Watering Day 63 : 1 Liter Day 66 : 1.5 Liter with Bio Enhancer I add Bioenhancer once every 14 days +/-. with 1 gram per liter I add very few nutrients to my water because I have already placed Bio Nutrients directly in my soil 😉 (BioGrow & BioBloom added on week 1 & 5) ------------------------------------------------------------ 🔥❄️Temperature of the week : Day : 21-24°C (Humidity : 55-70%) Night : 17-19°C ------------------------------------------------------------ 🚀Equipment of the week ⭐️ : Lamp Led 300W : power 95% at 40cm Extractor+ carbon filter ON 24/24h 2 fans ON 12/24h ------------------------------------------------------------ 📜Links : 🌱Zamnesia Gelato seeds : https://www.zamnesia.fr/5671-zamnesia-seeds-gelato-feminisee.html Food for your plants 🔥🔥👍 https://www.greenhousefeeding.com/ 👨‍🚀My Instagram 🌱❤️️: https://www.instagram.com/hou_stone420/ ------------------------------------------------------------ ☮️Thanks for your visit💚☮️
Likes
30
Share
@McGrowin
Follow
Light defoliation and using LST clips to produce a few more clone sites before flipping these girls into flower. They are both ready, with the hella jelly showing calyxes and the jelly donutz showing sex. The Donutz Triploid has so much stretch and too much internodal spacing to do much more cloning. Hoping to clone one more off her before the flip. Added pics of the triploid!