Vote Now 🏆 for the Grow Awards 2025!
Likes
167
Share
⭐ TrolMaster tracking ⭐ I started to track my crop during week 15, when I got the Tent-X TCS-1 by TrolMaster. First impression was: this is too professional for me, I can't handle setting it up and using it well. Then I started reading some posts on Instagram, I visited their site and in 5 minutes my cultivation experience took a huge step forward with disarming simplicity, I couldn't believe it. I have uploaded tracking videos from the TrolMaster app for each week from the 15th to the 19th, as well as the two weeks of drying stage. ⭐ Controller Chronicles ⭐ Day after day I appreciated the clarity and precision for data, access to all settings and instant readings by connecting a WIFI router to the controller's LAN port. I loved the possibility to dim my lamps remotely, or even automatically based on the temperature in the box! 🌱 GERMINATION (2 days) Seeds in a glass of EC 0.4 tap water for 10 hours, then in root riots and under the lamp. They sprouted after 48 hours from dry seed. 🌿 GROWING STAGE (10 weeks and half) I decided to give these plants a long vegetative growth and this allowed me to do a lot of training on both. Starting from the 4th veg week I started with defoliation sessions every two weeks, for a total of four during the entire vegetative phase. The last defoliation was done a couple of days before the switch, in order to allow the lower parts of the plant to get as much light as possible. Furthermore I did Topping on week 6, cutting the apical branch, then on week 8 I did Topping again on several sites, as well as SuperCropping on the highest branches to make the canopy uniform. The light cycle I used is 18/6 and the last two veg weeks I lowered the light hours to 16/8 first and 14/10 then. During the veg stage I made 4 DWC change, PH was always between 5.5 and 6, about EC I started with 0.6 and was 1.4 on the last veg week. 🌸 FLOWERING STAGE (9 weeks) I started this phase after 36 hours of darkness, I then changed the DWCs solution (adding a flowering stimulator). Then I mounted the ScrOG-net about 50 cm from the base of the plants and I wove the phenotype #1 through the net occupying at least 60% of the available space; the phenotype #2 stretched shortly after the switch and I used the net only to widen the central branches. They showed the pre-flowers two weeks after the switch, then I made two defoliations on week 3 and 5 flo. During the last four weeks of flowering (weeks 6-9) I simply paid attention to the PH-EC levels to provide the roots with optimal conditions. I then kept the TEMP-RH-VPD-PPFD values ​​under control and this also thanks to the Tent-X controller by TrolMaster which allows me to provide optimal conditions also above. I chopped them when trichomes were about 85% milky and 15% amber. During the flowering stage PH was always between 5.8 and 6.2, about EC I started with 2 and was 2.3 on the last week before flush. ✅ HARVEST - From dry seed to harvest: 140 days (2 days germination + 75 days veg + 63 days flo). - Chopped after 4 days flush and 48 hours in dark; - Wet trim, removed fan leaves. ✅ DRYING STAGE - Time: 14 days; - Average: 20° C - 50% RH. - After that I made a dry trim, removed branches and sugar leaves. ⚖️ DRY WEIGHT - Phenotype #1: 230 gr buds + 25 gr larf; - Phenotype #2: 105 gr buds + 50 gr larf. So, the overall dry weight is: 335 gr buds + 75 gr larf. ✅ CURING STAGE - Curing is done after 30 days with Boveda 62%.
Likes
15
Share
@MG2009
Follow
07/08/2020 Powdery mildew has cleared up got bird poop on leaves now will clean, and defoliate as needed🙏 Red Sky clones do not take light stress well be on top of that shit with a timer! The first clone I took I put under 24 hour light (on purpose)sent out male flower at several nodes (collecting for Feminized project) So no light stress, unless you need to!
Likes
16
Share
@Tokeo024
Follow
Came out great and the smoke test was fantastic. The bud is so sticky that it’s almost inconvenient. I rolled a blunt and had enough resin on my fingers to roll a super tiny ball of finger hash at the end. The smoke is smooth but a hair harsh. I sleep so well after smoking this.
Likes
10
Share
Bonjour à tous les padawans et maîtres jedis Tout d'abord merci à @pyramidseeds de me permettre de faire cette culture en m'offrant les graines Merci aussi à @lientec_led de m'offrir l'opportunité de tester sa toute nouvelle lampe Roccit 240w ainsi que organic nutrients pour l'engrais MATÉRIEL CONFIGURATION Box 80×80×160 Lampe led Lientec Roccit 240w Ventilateur à pince 15 watts Xiaomi Deerma humidificateurs 5L Hygrometre thermomètre Extracteur PROFAN 107 m3/h - 100 Prise programmable électronique ×2 1 pot carré noir 11 litres Engrais organic nutrients Substrat biobizz ligthmix Fil de fer et pince coupante Microscope Petite balance de précision CULTURE ÉTAPE PAR ÉTAPE J'ai tout dabord fais germé ma graine avec le easy start de Royal queen seed et je suis agréablement surpris car franchement le taux de réussite est très élevé (18 graines sur 20) simple d'utilisation et très efficace. Une fois la plantule sortie et d'une hauteur de 2 ou 3 centimètres je la prend délicatement et la place directement dans son pot définitif. Je préconise des pots allant entre 10 litres et 15 litres pour des autofloraisons cultivées en intérieur. Le pot aura été préalablement préparé avec 80 grammes de big plant de organic nutrients que je mélange avec les 11 litres de substrat Je dépose la plantule dans son pot définitif je recouvre un peu de avec de la terre je tasse légèrement et j'arrose pour garder le substrat humide pas plus Je place ma lampe led 300watts à environ 90 centimètres de la plantule avec un cycle de lumière de 20/4 grace a un programmateur car c'est pour moi le cycle de lumière qui offre le meilleur rendement pour une autofloraison. Jour 1 préparation du substrat je mélange 80 grammes de big plant de organic nutrients à mes 11 litres de substrat je transplante ma plantule et j'arrose avec 2 litres d'eau ph6.3 à laquelle j'ajoute 1 gramme par litre d'eau de mykoriza prenium de organic nutrients
Likes
15
Share
July 7, 2020 update... Houston... We have lift off!!! Flowering has officially begun with all four ladies. The actual heights of the 4 ladies is as follows 24" & 26" (indoors) and 21" & 24" (outdoors). The indoor plants are also much bushier and have more nodes. The outdoor plants are looking more like old school autos just focusing on a main central cola. I gave all of the ladies a LST bend and tied them down at a 45 degree angle. This is to allow better light penetration to the lower bud sites and usually results in several branches producing fat colas, not just the top. I am starting to see some bug damage on the outdoor girls. I have been trying to use companion planting of Basil, Chives, Spearmint, and Oregano as natural bug deterrents, but that's not working as well as I had hoped. I also sprayed them once with Safer End-All. Its OMRI listed and recommended by 'The Rev' of Skunk Magazine and True Living Organic fame. I'd prefer not to spray them again, especially as they get farther into flower. Any suggestions for keeping bugs away from my girls would be appreciated - hit me up in the comments. 👍
Likes
3
Share
Completely back into Veg again growing slowly for some most are thriving! Had around 20+ seeds off a zkittles and chocolate skunk will be using them indoors on my next cupboard grow!
Likes
3
Share
Completely back into Veg again growing slowly for some most are thriving! Had around 20+ seeds off a zkittles and chocolate skunk will be using them indoors on my next cupboard grow!
Likes
7
Share
July 7th makes week 11 for these ladies. They were supposed to have been harvested this week but we're a ways away from that. We have a bit of maturation and swelling to do yet. Maybe I stalled them, could be genetics, could be a combination of both? We'll see. I'm just happy they look as good as they do and to have had the helpful growmies I've had here giving me tips and help along the way. Thank you!
Likes
20
Share
Pretty happy with the grow and the harvest, the drying went well also! Each grow highlights changes for the next and this has been no different! I'll be making more training adjustments in the next runs to try and refine the vertical scrog and get to the point where it's a wall 1 bud thick! I know it will get there in the end it's just like relearning how to do a horizontal scrog! I just need to predict the way the plant will respond when the light is from the sides! Bravery and brutality during pruning I think is the key! 😂✌️💚
Likes
20
Share
Pretty happy with the grow and the harvest, the drying went well also! Each grow highlights changes for the next and this has been no different! I'll be making more training adjustments in the next runs to try and refine the vertical scrog and get to the point where it's a wall 1 bud thick! I know it will get there in the end it's just like relearning how to do a horizontal scrog! I just need to predict the way the plant will respond when the light is from the sides! Bravery and brutality during pruning I think is the key! 😂✌️💚
Likes
20
Share
Pretty happy with the grow and the harvest, the drying went well also! Each grow highlights changes for the next and this has been no different! I'll be making more training adjustments in the next runs to try and refine the vertical scrog and get to the point where it's a wall 1 bud thick! I know it will get there in the end it's just like relearning how to do a horizontal scrog! I just need to predict the way the plant will respond when the light is from the sides! Bravery and brutality during pruning I think is the key! 😂✌️💚
Likes
10
Share
Bonjour à tous les padawans et maîtres jedis Tout d'abord merci à @pyramidseeds de me permettre de faire cette culture en m'offrant les graines Merci aussi à @lientec_led de m'offrir l'opportunité de tester sa toute nouvelle lampe Roccit 240w ainsi que organic nutrients pour l'engrais MATÉRIEL CONFIGURATION Box 80×80×160 Lampe led Lientec Roccit 240w Ventilateur à pince 15 watts Xiaomi Deerma humidificateurs 5L Hygrometre thermomètre Extracteur PROFAN 107 m3/h - 100 Prise programmable électronique ×2 1 pot carré noir 11 litres Engrais organic nutrients Substrat biobizz ligthmix Fil de fer et pince coupante Microscope Petite balance de précision CULTURE ÉTAPE PAR ÉTAPE J'ai tout dabord fais germé ma graine avec le easy start de Royal queen seed et je suis agréablement surpris car franchement le taux de réussite est très élevé (18 graines sur 20) simple d'utilisation et très efficace. Une fois la plantule sortie et d'une hauteur de 2 ou 3 centimètres je la prend délicatement et la place directement dans son pot définitif. Je préconise des pots allant entre 10 litres et 15 litres pour des autofloraisons cultivées en intérieur. Le pot aura été préalablement préparé avec 80 grammes de big plant de organic nutrients que je mélange avec les 11 litres de substrat Je dépose la plantule dans son pot définitif je recouvre un peu de avec de la terre je tasse légèrement et j'arrose pour garder le substrat humide pas plus Je place ma lampe led 300watts à environ 90 centimètres de la plantule avec un cycle de lumière de 20/4 grace a un programmateur car c'est pour moi le cycle de lumière qui offre le meilleur rendement pour une autofloraison. Jour 1 préparation du substrat Avant transplantation définitive je mélange 80 grammes de bio stimulant bib plant de organic nutrients et j'arrose avec 2 litres d'eau ph6.3 à laquelle j'ajoute 0.7 gramme de enhancer feeding greenhouse par litre d'eau
Likes
Comments
Share
I saw the first pre flowers today. She looks healthy, great growing. Still struggling to get ph down. Watering with 5.8 ph water.
Likes
4
Share
Due to the messed up leafs I had cut my losses on this gelato41 big bushy pheno Striped all the big leafs and imma finna flush her soon and cut my loses she wud ave been a nice chunky girl but sometimes u gotta roll wid the punches 😅😅
Likes
4
Share
Tall pheno gelato 🍦🍨🍧 Keeps stackin and stacking Crazy sweet CORNETTO candy ice creams terps