Likes
Comments
Share
All the same genetics crazy to see the variations in phenos
Likes
3
Share
@Canna96
Follow
Hey now, hope everyone had a great weekend. The ladies are all doing great, the Sativa leaning strains are definitely growing faster than the Indica leaning ones, however I will use risers under those plants to keep the canopy even. I am still feeding Silica, Cal mag, and veg nutes, and I will let them Veg for one more week until day 42, then I will flip to 12/12. Six weeks will be the shortest Veg time I have run with any photoperiods, as it typically takes me 7 weeks to build the mainlines and let them bush out. I am also running a Royal Runtz and a Grimm Glue in soil, to compare with the ones grown in Coco, they are not mainlined as they didn't grow as fast as the ones in Coco and I didn't want to hold the rest back. These genetics all seem strong and healthy. I am still just running LED lights and I will add a 315Watt CMH to the mix for flower, which also works out well as the temps in my region are starting to drop, and in another week or two, we will have night temps in the 40's which is perfect for cooling off a hot grow room. I only do one run per year, and the best timing for me is to pop the seedlings in August, and by the time we get to flower, the weather is cooler and much less humid. I hope everyone has a great week, stay safe and Blaze On!
Likes
22
Share
Alright, so here we are again! At the end of week 8 and this little lady ain't so little no more! Sheesh! She's a monster! And a mother lol to some beautiful clones, which we cut last week. Can't wait to see how they do in comparison to her. I did a little defol as well and will continue to do so as I wait for my young plants to veg. This is going to be the longest veg I've ever put a plant through so wish me luck. Thats why I'm loading her up with mag. She already has an abundance of Calcium...BAS does a really good job of loading their nutrients with it. I also gave her some Gaia rock dust and some LABS and JMS solution as a probiotic for the plant and it also brings more microbes to the living soil! Good stuff! Highly recommended! Nothing like homemade bacteria and microbes to give you that extra advantage 😉. Well thanks for stopping by. See ya next week.
Likes
14
Share
Blütewoche 8. Let's Go. Die 7 war unspannend. Ich habe mich mit dem Mangel abgefunden. Meiner Einschätzung nach bekomme ich diesen nicht in den Griff in diesem kleinen Topf. Also immer weiter düngen. Ein Ende ist auch noch nicht in Sicht. Buds werden dick und die Pistillen langsam braun. Die Trichome prüfe ich wöchentlich, bisher passiert da aber nichts :) Weiter geht's.
Likes
19
Share
@GrowGuy97
Follow
Day 89 - Harvest day has finally came for this lady & I beyond impressed, to only be in a 2 gallon pot she has put off some massive rock solid buds that smell amazing! Very strong stable genetics that’s can handle really anything you throw at it, would highly recommend especially to first time growers because this strain is so forgiving! Stay tuned for the harvest update & another run from spliff seeds because I will definitely be getting some of their strains🔥💪🏻 Thanks for following & happy growing friends!✌️🏼🙏🏼🌱
Likes
1
Share
@rommyu
Follow
Lots of issues at the moment, issues with not knowing if I have a deficiency or if the plant is progressing along. Yellowing leaves - should I let them falls off? should i remove them to prevent their getting infected and infecting others?. Outside temp is around 30-32 degrees making my ice pack on the pot side solution insufficient to keeping the temperature stable. Lots of tucking and the canopy is reaching 1m2 and the roots are so massive they fill the bucket completely (15L). They smell fresh and It feels alive, the smell the energy coming off the microbes, beneficial bacteria and mycorrhizza, like smelling a flowing river teeming with life. I didnt train the stems properly (i wanted more horizontality).. Which is causing the issues I have now. But in the old tent (which was 2x2 feet 60cmx60cm) they would touched the wall and created other issues, I hadnt decided yet where i wanted to put it next (120x240cm or 60x120cm). Im learning alot about electrical conductivity (ec) and also about how my plant responds to concentration of fertilizers and helpers as suggested by the manufacturers recipe. I have branches in the front that are not growing to the ideal height, im just tucking and tucking the others hoping they catch up. also the light ppfd is up to 1000. and the distance is about 250cm. Im hoping to get at least 350grams of dry bud, and if im lucky maybe even 500!. I plan to do the same exact grow again, with the same breed (not a clone unfortunately). Hopefully I can increase the yield as well as any factors i deem needing improvement (less electricity, optimal percentage of fertilizer, less fluctuation in vpd). in short: lots to learn! but not enough buffer!
Likes
37
Share
@Capo420
Follow
Awesome Week💚 Following some great discussions with more experienced growers, I really think we got things back on track!🚆 🙏 To Those Growmies! I really raised the ppm this week we topped out around 630 PPM This was in an attempt to balance out some nutrition issues. I think the ladies have responded very well. 😃🌱💪 Raised the light up to 24in as well a few days later after seeing positive changes due to feeding regiment. Started preflowering, showing pistols on all plants. Counting down these last 7-8 weeks when the ladies beauty comes out 🤩 Will update throughout the week with photos and videos. Happy Growing! 🤙💚💪🌱😎🌱💪💚🤙
Likes
15
Share
@Waveform
Follow
Waiting for first signs of life … While we are, I thought I’d give you a short explanation on the software’s graphics in case you did not follow my first diary. The one to the upper left, as its headline says, is the temperature graph. Most important line is the red one, showing the leaf temperature measured with an infrared temperature sensor. As there are no leaves yet, it is pointed towards one of the pot’s wall at soil level. Air temperature from a sensor that usually hangs around somewhere around top level is violet, and the grey line is the outside temperature close to the tent, helping the software to determine if a main blower action will effectively lower temperature. As I learned from the first grow a plant day that corresponds to the natural day can cause enormous gaps both to temperature and humidity, I inverted the plant day now, starting their night at 11 a.m. So after the first day temperature will only vary around 1.5 °C, which is of course due to the low light intensity too. Humidity graph on the upper right is quite crowded. Main line is the blue one, tent air humidity, which on this first day was between excellent 65 – 70% most of the time. For the moment humidifier is electrically disabled. There is quite some excess humidity on the tent floor and no reason to push this any further. Outside air humidity is grey again and taken from the same outside sensor that reports outside temperature. The soil humidity sensors are simple analogue capacitive sensors which have their flaws. I am interpolating their measurements to have a somewhat smoother reading, but as you can see from the turquoise humidifier reservoir reading (in legend named as plant soil hum 1), they can get confused when humidity is very high and start to report random numbers for some time. The most important graph for all growing stages is the lower left one, where the pink line meaning plant VPD should be inside the green optimum range for somewhat perfect conditions. This cannot be attained all of the time – dehumidifying isn’t as easy as humidifying –, but software tries its best to do so. Outside VPD is grey again. The last graph is more for amusement than anything else. The light intensity sensor is hard to position correctly, and everything you see about illumination and DLI (orange and green, plus grey for the accumulated 24 h DLI) should be taken with some spoonful of salt. Any resemblance to real world professional instrument readings can be considered purely coincidental. The violet line is the CO2 reading from such a sensor, and you can see that its tiny peaks correspond to even tinier black peaks at the bottom of the graph, reading TVOC values which in this case, once they will be more than possible measurement irregularities, can be interpreted as smell. ------- End of week 1: All seeds germinated. I wasn’t at home most of the time, and it turned out using the humidity sensor to monitor the humidifier’s tank wasn’t good for the stability of the system. Arduino crashed, so there are no pictures yet and no graphs to show. I have the feeling light was a bit low as the seedlings grew a bit tall, but with lights now up to 20% I guess this problem is fixed. More tomorrow when I have some more data to share. Even more end of week 1 (I extended this week to 9 days as I cannot tell when the seedlings started to show): Lights are at 40%, meaning 40 W in total. No reason to give them new water until next week. As some flies showed up from the BioBizz soil, I added 2 yellow cards. So far, everything in normal ranges. I’ll switch the control to grow phase soon which will raise the VPD slightly by 0.5 kPa. It’s interesting to see the CO2 level started to climb by 50% during their last night and has not come down to baseline afterwards. I restarted the app to check if the sensor had lost its calibration, but it still sits at around 660 ppm now.
Likes
15
Share
@Chubbs
Follow
Weekly update, sorry for being a little late. I was out of town the passed week. Wow is it wild to come back and see them after being gone. The smell,look, amd beyond sticky is amazing. I chopped half as they're ready, the other half will come down in the next couple of days. All in all happy growing.
Likes
7
Share
Some deficiencies due to PH levels too high. Replaced with new PH pen.. Waiting on recovery, should notice difference by the end of the week.. Going to week 12.😓🎋
Likes
26
Share
@GrowGuy97
Follow
All of the ladies are now starting to flower except the NHL I think it’s a little behind but all in all they are growing great! Day 31 - Everything seems to be going great, fed the ladies yesterday havnt had any more issues yet (Thankfully) thanks for following & happy growing friends✌️🏼🌱 Day 33- A few of the ladies have some dead leaves not sure if it’s normal or if something is wrong.. they all seem pretty healthy other wise!
Likes
10
Share
Hey everyone ☺️. It gets more beautiful from week to week 😍👍. I have them all this week Sprayed again properly with neem oil in the veggie phase ☺️. There have been no trips for 2 weeks, but prevention is better 😀. Because of the neem oil, the plants look very dark and shiny, which I really like when they shimmer like that 😝. I didn't do any training these days, that will be done again the next few days 👌. it was watered twice this week with around 0.6 l per plant. The Ph / Ec measuring device was also recalibrated. Otherwise there is nothing to report for this week and we'll see you again with the next update ☺️👍. I wish you and your families a Merry Christmas 😊. Stay healthy and let it grow 🍀 You can buy this Strain at : https://www.zamnesia.com/de/5165-zamnesia-seeds-kalini-asia-feminisiert.html Type: Kalini Asia ☝️🏼 Genetics: Black Domina x Purple Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
4
Share
Zum ersten Mal habe ich mich im LST versucht. Denke dass ich darin noch etwas zu grob bin. Für konstruktive Kommentare, Kritik und Verbesserungsvorschläge bin ich immer offen und dankbar :)
Likes
4
Share
Peace Grower Community Week 2 is almost over. And i‘m happy with everything for now. The shortest of the Bilbos was since Day 1 in the Tent. But after i put her little bit higher she was coming too! The others are really strong and want to reach the Light hahaha 😜💚 In Veg Week 1 i was nearly 300 PPFD. Going up to 400 after few Days. Tomorrow when the Week is over i started to give them every Hour 5 Mins UV Light If someone has some Tips for me, im every time open for that. As a Grower you have to listen sometimes to the Opinion of other People to get better 🙏🏼 Hope you enjoy my Grow much And respect to Genehtik Seeds for this amazing Genetic 💚💚 she definitely have earned for a Reason 28 Cup Pocals 😎😉 keep up the good Work
Likes
7
Share
From the start i wanted these plants to grow on its natural potential. No topping, no training. My experiment was to see the results compared to a trained plant. From what i saw, deffo topp or train these. Even if it takes longer to grow, it will give better yields. Overall its got a strong and tasty smoke. Just didnt harvest in 8 weeks like what the manufacturer sais. But 12 weeks is not bad. Dry weight: 32 grams Atleast this grow was a success, so im happy. Next is Mephisto genetics! Thank you for reading!!
Likes
Comments
Share
Seguindo com regas de dois em dois dias, nas plantas 2,3 e 5 foram colocados uma colher pequena de substrato preparado completo. notado um desenvolvimento vagaroso da Tropical tangie, ela não parece se dar bem com o frio.
Likes
4
Share
🌱 Grow Diary Update 🌸 What’s up! It’s Week 5, Day 2 of flower, and the girls are looking super happy. 🌿 I had a little hiccup earlier in the week—PPMs started getting a bit high, so I had to hit them with some plain pH’d water to level things out. 💧 Now they’re back on track and coming out at a nice 900ppm. Smooth sailing again! 😌 The room’s starting to smell amazing, and these buds are getting crazy sticky!
Processing
Likes
39
Share
👉With each day it grows a noticeable amount. Its staying short and the leaves are actually touching the media on the lower set. Its actually on its 3rd node, and i will probably top it on the 4rth. I lowered the light from 36 to 24". This week i will lower it again to 18". The plant is short but its growth is still vigorous enough. under the leaves there is vegitation emerging as well. I like the fact that its staying short, I will probably need every inch of of my tent so the longer its stays short and grows like a bush, the better. 👉Im doing the week 3 nutrient schedule for another week because week 3 is the highest levels of grow nutrient. My EC target is 1.7 and is near the high end of the recommended range. I usually start with 2 gallons and then mix and pH the batch. If the EC is high I then ad pHd/calmag/ArmorSI water to lower the EC to the desired range. Im feeding 1 liter of nutrient solution and the runoff is an average of .6l. I give this 2x a day. The EC is slowly creeps up over 3-4 days and when it gets to 25 to 30+ EC I use a liter of rinse solution before the next fertigation. the rinse solution is same water source as the nutrient mix, (RO water at 5 micro-Siemens from a medical grade RO unit) with Armor SI and Calmag pH's to 5.9. The machine isnt at my house so I mule the water in 6 gallon water carriers. Eventually the plant will be big enough that more solution is needed at each feeding. During the Critical Purple and Hindu grows, the EC would actually never guild up because the plants were absorbing a lot of the nutrients. I will gauge the needed inflow volume of nutrient solution by the amount of run-off. Currently 1 liter is what I determined is the minimum needed to keep the coco wet and buffered. As the plant absorbs more water the drain off will decrease. I will target 20-30% run-off from inflow volume. EC value also determines inflow volume but to save on mixed nutrients I like to precede a feeding with the rinse solution if the EC is too high. 👉I disinfect the water jugs 1 time a week with 1% bleach. I disinfect my nutrient solution dispensing jugs at each batch mixing. My watering can and measuring vessel, I rinse with the H2O2 spray at each use. 👉To help keep the grow clean I have a 1 gallon garden sprayer filled with water and 60ml of H2O2. The recipe is usually just 30ml/gallon, but I wanted it a little stronger. I spray the exterior of my cloth pot once a week to rinse of the build up nutrients and prevent mold, mildew and green fungus. I also use the spray to disinfect the drain trays as I swap them out after a feeding. I have a couple dozen white wash cloths that I use to help clean and dry things. I use fresh wash cloth each day, and keep everything as clean as possible.
Processing
Likes
18
Share
Day 77 she’s just a beast. She got a little thirsty and upset but perked right back up once she got some water in her. Idk what she’s doing but being a beautiful lady 👌🏻
Likes
43
Share
🍼Greenhouse Feeding BioGrow & Bio Enhancer ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights 🌱 FastBuds 420