I'm excited to report that the flowering phase has officially begun, with only T-55 days/60 days left to go! 🌸🌿 Currently, my lights are set to 50% intensity, but I plan to gradually increase them to 75% over the next few days. 💡✨ I'm happy to say that everything is looking great in the grow room, as I've managed to dial in all the necessary parameters. I will continue to tuck the tops for the next two weeks to ensure optimal growth and yield. 🌱👌 As for my latest consideration, I'm thinking about purchasing exhale CO2 bags. I've never used CO2 before, but I'm eager to give them a try and see how they affect my ladies. 🛍️🌿💨 Stay tuned for more updates as my grow progresses, and feel free to share any tips or suggestions in the comments below! 😎📝💚 Best regards, Day 6 of Flower: Unexpected Setback 😔🌸 Today, I received some unfortunate news that has left me feeling quite disheartened. One of my fellow growers, who is cultivating the same strains from the same pack as I am, encountered a distressing situation. One of his Queens unexpectedly hermaphrodited during week 3 of flowering. This revelation has placed me in a difficult predicament, causing me to question whether I should continue with the identical strains or abandon them altogether. 🚫⚡️🤔 Currently, there are four of us involved in this collective venture. Two of us, including myself, are in the initial week of flower, while the remaining two are at week 3 and 4 respectively. Fortunately, the last individual seems to be progressing smoothly with their plants, as everything appears to be thriving in their garden. 🌿👥💚🌱 Let's see how this situation unfolds and continue supporting one another through the challenges of our growing journey. Stay tuned for more updates! 🌸🌿🌱 Best regards,

WEEK 1 of flower. This is insanely quick, veg for three weeks and on week 4 we are flowering strong. It is raining a lot, so i had to use a top dressing, ingredients on the week 3, to manage the soil nutrients till the end of the cycle. About two table spoons. Watering once a week, with the mix above, otherwise rain is taking care of them, very natural as a grow, nothing much complicated, no science fiction with fertilizer or chemistry. I’m curious about the yield, and how much can i pull out of this way, with minimal work and a nearly inert soil. Let’s see how this experiment turns out.

* ***************** Week 2 of Growth From Seed, April 18 to 25, 2020 - Days 8 to 14 from germination ********************** * Getting rolling on week 2. Not a surprise for me that she is doing very well. I seem to match well with the traits in Sweet Seeds selections. She is wide and will squeeze out her third set of leaves this week and hopefully working on her fourth set......time will tell🤞She is also getting more green at the start of the week so its time for some plain water as well. The medium has had little to no runoff so far so the ppm will be building and likely pH adjusting slightly,. Switch CalMag this week and going with GH as it has a 1% value for Nitrogen. Will be increasing the CalMag now as well. Will be getting ppm in the 500 range more this week. May start to introduce Sensyzime at the end of the week. Keep moving the lights up and down trying to dial in between 18” and 30” and see how they react. Seems to be about 28” right now they are happy. Playing with the VPD and finding that they are not as happy with the VPD up around 1.0 and rather happier around 1.4??? Happier meaning tips and looking like she is getting bigger. Played with humidity this weekend as well between 52% and 75%. Again, they seem happiest around 58%..........going to try that for a couple of days and see how they grow for the next few days. I feel they are alrighty slower at the high humidity. Not backing away for this but rather trying to read the girls🤪🤪🤪🤪 *****Daily Detail: Apr 18, Day 9 - VPD - 1.1 - 2L feed with Vitathrive and Velokelp and Dual Fuel @ 0.75ml/L, CaMg+ @ 0.75ml/L = 575ppm, 5.8pH. - playing with humidity up and down today. - ready for a plain water feed and a little larger quantity to soak all the medium. - not sure if tomorrow though.......might be a little wet yet in the medium. - she is doing very well. She has gotten taller and seems very energetic right now😀👍 Apr 19, Day 9 - VPD - 1.3 - 2L watering today with CaMg and Sensyzime @ 1ml/L each. 240ppm with 5.9pH. - Had more runoff, that was the goal. Didn't bother to measure this though. - Just trying to bring the medium pH in line and reduce some of the ppm. - Things just aren't progressing as I think they should. Apr 20, Day 10 - VPD 1.5 - dry out day - lower humidity in tent to 55% Apr 21, Day 11 - VPD 1.5 - dry out day, again. Humidity kept low. - Added home made CO2 to the tent today. - 3.5" tall only. - this girl is doing the best in the tent right now. She has handled the over feeding the best of them. Apr 22, Day 12 - VPD 1.4 - Dry out day yet again but now raising the humidity back to 65%. - tips back up today. Apr 23, Day 13 - VPD 1.4 - 0.5L - P & V & Vitathrive @ 1ml/L, DF & CalMag@ 0.5ml/L = 410ppm and 5.9pH - primarily calmag and something for roots. - She has some wide leaves and doing well. She has just been slowed down....crap. Apr 24, Day 14 - VPD 1.4 - 0.5L - Voodoo and Piranha and VeloKelp @ 2ml/L = 180ppm pH'd to 5.6 - tough week.......she battled over watering as a result of some over feeding last week.

Day 23

14cm vertical growth this week! Absolutely monster fan leaves.

Day 9 and she looks as you guys can see lol i mean to my eyes she just looks amazing, she is fully recovered and full on going like there is no tomorrow , she is praying for 11h strait non stop and i could not be more happy with the way things are running. For this week i will keep the same food regime as last week, man i love how my girls love Aptus Holland and how well they respond to it all 💚💚💚🙏🙏🙏✊✊✊ I know she has a lot of leafs , but its only that hehehe since i clean the branches all up to the top before flipping her to flower leaving just the leafs to help them get more energy for this first 2 weeks of the flowering stage, after it i will defoliate the hell out of this lady best and let her focus her energies on but production, but for now i want her to stretch the most she can since she is not phenotype that stretches a lot 😅 non or lees she is an amazing bud machine i believe she will do it once again hehehe As for the Light intensity i took 12 readings over my canopy to find out my PAR and the average PPFD is 1013 Umol/m2/s, for those of you that do not know the meaning of this, it means photosynthetic photon flux density , this basically the number of photons going arround for plants to absorve in a determinate area, in this case my 3x3 room Day 11 and there were toooo many leafs for what my eyes are use too so i decided to defoliate her, this will also help stopping the stretch since she is doing it more than her mother did and space is not something i have in this 3x3 area lol she is drinking like crazy, 5,5 liters day and increasing, curious to see how much will she be drinking wen in full flower. And she didn’t care at all the fact that i defoliate the hell out of her and she just keep on going and praying like there is no tomorrow , amazing, but amazing phenotype from an amazing genetic, caps off to ZamneziaSeeds for this one, i was impressed with the first round and even more impressed day bay day with the clone I selected 💚💚💚🙏🙏🙏🙌🙌🙌✊✊✊ As always thank you guys for your love , your time, your support and it all, i fell blessed and i am truly thankful 💚💚💚🙏🙏🙏🙌🙌🙌 All i grow is medicine for myself, for me and for my best friend with is me 😆 nothing to sell, so don’t even ask 😅💚💚💚 All info and full product details can be find in can find @ https://viparspectra.eu/collections/grow-lights DISCOUNT CODE 5% - DOGDOCTOR ( all store ) https://www.zamnesia.com DISCOUNT CODE 10% - GROWITGD ( just for seeds ) https://aptus-holland.com/ #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #viparspectra #zamnesiaseeds #growerslove With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚💚💚 More info and updates @ https://growdiaries.com/grower/dogdoctor https://instagram.com/dogdoctorofficial https://youtube.com/channel/UCR7ta4DKLFMg2xxTMr2cpIg 💚💚💚Growers love to you all 💚💚💚

Week 4 really exploded growth !! I tried some lst and nutrients from hydroponic general flora series. I suspected some burn though because I seen a few yellow tips. I did a flush and hopefully see change. Thanks for viewing share some tips and suggestions Budz!

Sponsored by Mars hydro, thanks for the great support 🌱

As you can see both plants exploded over the last 7 days and they stretched a lot during their first week in Flower.😎 😎💪 Lemon Cherry (left) now finally starts growing well and looking very healthy now. Papaya (right) ist procucing all the small sidebrnaches with buds, that i hoped for. 😍👏

Я. Севодня. Решил. Срезать эту. Девочку как. Думаити. Это. Правильно ?

Everything is going smooth I flipped her to flower because unlike the package says she is not an auto

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

the first crooked leaves were not a problem. the 6 plants are vegging nicely showing large broad leaves - two sets now and beginning to sprout the third set of leaves. started nutrients this week and root juice. 150ml filtered water every other day - lights at 20 inches and 60% power. the ladies are looking good!

Wegetation 25 weeks

Welcome to Flower Week 4-5 of Divine Seeds Auto White Widow I'm excited to share my grow journey with you all as part of the Divine Seeds Autoflowering Competition 2025. It's going to be an incredible ride, full of learning, growing, and connecting with fellow growers from all around the world! For this competition, I’ve chosen the Feminized Automatic strain: Auto White Widow Here’s what I’m working with: • 🌱 Tent: 120x60x80 • 🧑‍🌾 Breeder Company: Divine Seeds • 💧 Humidity Range: 50 • ⏳ Flowering Time: 58 Days • Strain Info: 20%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 3 • Nutrient Brand: Narcos • ⚡ Lights : 200W x 2 A huge thank you to Divine Seeds for allowing me to be a part of this amazing competition and Sponsoring the Strains. Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! I would truly appreciate every bit of feedback, help, questions, or discussions – and of course, your likes and interactions mean the world to me as I try to stand out in this exciting competition! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

Awesome comparison in the Cronk nutrient line. One plant went by way too quick with the puur line so couldn’t get a full cycle of nutes with it. The auto pot with the Bonnie Clyde was the clear winner. Harvested 5 ounces alone - big thick nugs and extremely sticky like candy. Went through standard tent dry of 66’ and 59%rh for 13 days. Can’t wait for the smoke!