Likes
Comments
Share
@PanGrower
Follow
The leaves continue to turn yellow from the bottom. It seems that I started fertilizing too quickly and the tips of the leaves burned a little
Likes
36
Share
Day 122 / Week 7 of Flo: Since the colour of the fanleaves is fading away pretty quickly, i decided to add in a little nitrogen (in form of BioGrow). I havent been feeding any nitrogen since the beginning of the 5th Week of Flowering. Only the little that is in BioBloom, that is only 2% The complete solution i used is following: 16l Water (4 each plant) 8ml Bio Grow 48 ml Bio Bloom 16ml TopMax 48ml BioHeaven 48ml ActiVera Day 125 / Week 7 of Flo: I am not adding any more nutrients at this stage and i started watering every plant with 2,5l of water every two days as their demand is not that high anymore and i wanna keep humidity down to a minimum to prevent bud rot. To give you an idea in early Flowering i was watering every plant with 5-6l every 3 day's, from 5th week on i was giving them 4l every 3 days and now only 2,5l. As two of the plants (Plant #2 and Plant #4) are starting to look like they are close (about 10-12 days) to harvest i am considering to flush them one of the next days. The other two plants (Plant #1 and Plant #3) seem to be of the same phenotype and look like they can take a few days more, let's see.. Also they grew bigger and stretched more in flowering then the other two, maybe a little more sativa genes.. Day 127 / Week 7 of Flowering: Today i flushed plant #2 (back left) and plant #4 (front right) with 20l of fresh water 💦 from the well. Plants #1 and #3 are recieving 2,5l of plain water every second day for a few more days. Soon i will flush them too.
Likes
11
Share
12.08.25 weather is back on Sommer Mode and the plants continue to start flowering except the Quick Sherbet which still lacks visible signs. I installed a smart plug and camera to be able to give additional water on hot days based on leave tension while on vacation. The setup was super easy. I plan on top dressing flower fertilizer a second time at the end of August. Enjoy the weather if you can and happy growing to everyone!
Likes
1
Share
@GorkedOut
Follow
Flushed the plants a bit early, which caused yellow leaves. Going to hit it with some 4-35-26 for two more weeks and then flush again & then chop. Chopped on day 87-89. All three plants vary. Excited to see how they smoke after drying and curing.
Likes
10
Share
Chopped her down after 2 days of darkness before a slow dry for 1-2 weeks Keeping humidity at 58-63 and temperature in mid to low 60s.
Likes
2
Share
Hola a todo el mundo!! Espero que hayan empezado bien el 2026😃🙌. Con respecto a esta Big Bang, les cuento que esta semana la he trasplantado a una maceta de 20 litros , realice una defoliacion. La he regado con top veg 2ml x litro de agua, le añadi también 1ml x litro de agua de top bloom. Esta semana la temperatura ha llegado a 39 grados. Pero ya esta semana las máximas no superaran los 28 grados( espero que las plantas no se estreseen). También he doblado algunas ramas para que se estiren más hacia los laterales y no tanto para arriba. Creo que no me he olvidado de nada. Buen año para todos y que cultiven los mejores cogollos,ese es mi deseo.
Likes
81
Share
This is an incredible strain , I would be very upset if the bag became empty , This was an incredible plant , If this plant didn't win a place nothing I could ever grow would ever win , it honestly was a sin too cut her down
Likes
148
Share
@BioBuds
Follow
Greetings my dear Jungletamers, So a major surprise came when @MarsHydroLED contacted us and asked if would like to try out their new SP 3000 light. Being a fan of Mars Hydro for years, we of course accepted their offer. We are totally in love with this light. I was when I saw it in another grower's setup and was in awe of its output and results. So with much pride and thankfulness for the presents the Universe bestowed on us, in the form of MarsHydroLEDS offer and the bountiful harvest of the last grow, (which I am thoroughly enjoying btw, such a great weed to have grown ourselves) we start out on a new adventure that we can't wait to share with you. With many lessons learned from the previous grow, a mighty producing strain in the form of Expert Seeds Gorilla Glue #4, a.k.a Expert Gorilla's and a tweaked super soil mixture, we are setting out to hopefully get over a gram per watt, preferably 1.5. The Setup A 4.5 (140 cm) x 2(70) x 6.2 (200) grow tent, giving me a .98 m2 workspace. This space is customized to my needs. A standing fan will provide airflow through the whole grow, a top fan will help guide cooler air past my lights onto the grow. 3 56 ltr pots will be the home for the plants when they are 2 weeks old, up to then in smaller jars. The Light The leading role and star of the show will be played by the Mars Hydro SP-3000, so kindly provided by MarsHydroLED, which we will test and review here and I might say, endorse. I'm very careful with who I endorse and support these days, but a company with that many wins in design, I'm talking ever since their first range came out in 2009 these guys have been raising the bar for the whole industry, I did not hesitate to support this leading brand. If you want to compete with these guys, you better bring some quality AND affordable pricing. Why do I endorse the SP-3000 without ANY hesitation? It is seriously THE BEST light on the market in this price range and size group. It has an enormously effective output in U/Mol and with 30% less energy waste comparing to older LED lights. Prove me wrong! And with a company holding a considerable market share selling thousands of units every month, competing on price and quality, one would think that customer service would suffer. Of course, also Mars Hydro is not perfect, but check the sheer amount of people that not only praise the light but also the service received, should the light somehow not perform up to par. It is this dedication to their customer base that made this company have a fanbase... Yes, a fanbase with a website and a wiki. So if you are looking to buy new lights, check out the END OF SUMMER OFFER at the Mars-Hydro Global Store on Aliexpress: https://marshydroled.aliexpress.com/ 👈 Check their offers but also their score, they ship from a warehouse near you so you don't have the extra import fees!! Cut out the middleman and have a deal on these lights!! At the moment I write this in August 2021, the lights are 408,20 euro when sent from Germany to the rest of Europe, that's 40 euro cheaper than the other Mars outlets, BUT EVEN 60 euros cheaper than ordering at a grow store!! The Strain: Experts Seeds - Expert Gorilla feminized regular. Don’t let the name fool you because Expert Gorilla is suitable for growers of any skill level. However, you do need to be an experienced smoker because Expert Gorilla is one of the most potent strains on the market. Lineage: Chem Sis x Chocolate Diesel x Sour Dubb Popularity: Extremely Popular Flavor/Aroma Profile: Chocolate, Earthy, Fuel Yield: 400 g/m2 Stress Tolerance: High resistance to disease Potency: 24% THC Flowering time: 58 - 63 days The Soil: Those who saw my Monstercropped Gelato #33 grow (you should see it if you didn't, I'm so proud of that grow), know about my super soil and organic nutrients/ permaculture tea combo that starred in my previous diary. Because of the great results, we are going to use the same recipe, adjusted some more with some new ingredients that will complete the mix and give an even more sustained super soil buffer. 20% Atami Bi-grow (very similar to ocean forest) 20% Atami worm castings 20% Atami Coco Coir 10% Hydrocorn 10% Peat powder 1 cup Fossil seaweed chalk 1 cup bonemeal 1 cup bloodmeal 1 cup Microlife 3-4 teaspoons of epsom salt 3 cups of activated biochar (activated with our own permaculture tea) I just made layers, starting with hydro corn on the bottom to aid airflow/run-off. On this I started layering the coco coir, Bi-grow, peat, castings, and amendments in a way that the more mature the plants get, the more phosphorous and less nitrogen they will find. Every time I made three layers, I would mix them by hand. This way we simulate natural soil, which consists of humic layers, composting plant waste, fungal and microbial life, and nutrients from fossilized sources. The Nutrients I will start with just adding 6.4 PH water, although this soil should buffer ph itself and regulate, after 4 weeks, I'll slowly be adding: - Biobizz Grow - Plagron Alga Grow - Biobizz CalMag - Biobizz Flower - Plagron Alga Flower - Biobizz Topmax - Melasses The Tea Some of you might remember the permaculture tea from my previous grow, I have a short video in my harvest page showing how we make it), it will star again in this grow. - (Rain)water - Comfrey (whole plants) - Dandelion leaves - Roots and leaves from the earlier grow - Minor periwinkle (Finca minor) is a plant we have in our garden, it contains an alkaloid that is associated with increased brain function but also is a light toxin for wee beasties and other unwanted guests like gnats (who hate it). - When flowering I add some wood ash to this mix Thank you for checking in on one of my grows again! Thanks for all the love on my previous grow, check it out if you haven't seen it!! Hug Bud
Likes
26
Share
Really happy with how she’s turning out with massive bulking in this last stretch! GC is an amazing strain that I’d highly recommend to anyone looking for something very unique! Flushes are all done and we have about a week or two left, trichomes are all still very clear under the microscope want to wait for some borderline ambering before I chop her.
Likes
27
Share
Hello. I harvested the little kush she seemed to be ready. The both other i start giving only water till harvest. Hope buds getting a little bit bigger 🤞. Have a nice sunday✌️✌️
Likes
10
Share
@MarryJuan
Follow
Been trying to slow them down, defoliation and topped them tied down, doing well can’t defoliant fast enough. Guest room getting full
Likes
27
Share
3/25/2023 Week 6- Day 1 of Veg (Day 52 overall) Added my first between changes SILICA Top offs. Was worried that when you add it to pre mixed Nutes that it can make the whole thing turn into a gummy looking substance. I was ready to drain the system and start it over for the week if needed, but no issues adding it to the tank. the Silica going into the Res didn't gummy the system up, it did drop my PH by quit a bit causing me to have to bring it back in balance. 36 Gallons in the Tank Silica Add .5mil/Gal = 18Mil I topped some that needed to be topped, I defoliated some that needs to be defoliated. Since I have moved into Week 6 I have increased the light intensity up to just over 500 maxing it out for Veg Cycle. Next increase will be Week 1 of Flower. 3/26/2023 Week 6- Day 2 of Veg (Day 53 overall) All conditions looked great. Other than me not putting one of the humidifiers back right which means it didn't work last night so Humidity was lower than I like. But got the Humidifier back on it's stand correctly and it is now pumping away. With that I decided to give the plants a day off from any stresses, no topping, no FIMing, no Defoliation for today. Just some good old soaking up the light rays and the ability to get all the Nutes they would like.. 3/27/2023 Week 6- Day 3 of Veg (Day 54 overall) Looking kind of Bushy today, so I defoliated some, and topped some. 3/28/2023 Week 6- Day 4 of Veg (Day 55 overall) PH was a little lower than I like 5.74 so I added a few Mil of PH UP and brought it back up to 5.94. Not much else at this stage, just I topped a little and I defoliated a little. 3/29/2023 Week 6- Day 5 of Veg (Day 56 overall) Topped a little, Defoliated a little Watched them grow!! 3/30/2023 Week 6- Day 6 of Veg (Day 57 Overall) Main action today was breaking down my old tent and setting up a new tent and getting my second RDWC system setup and ready for clones. I Topped a little, I Defoliated some and started taking a good look at what I would like to take for clones in the coming days. I have a few bottom branches that look every promising for my clone material on each. 3/31/2023 Week 6- Day 7 of Veg (Day 58 overall) #3 is at 16" Tall #2 is at 13" Tall
Likes
21
Share
@Whitebelt
Follow
Week 8 - second week of flower One plant is much smaller - still not confident on sex of any of them ... maybe that small one is a male - I’m guessing they’re all female tho. Either way i may need to slaughter that little guy - the other plants are just overtaking the tent - might not be worth keeping that little one in there. Update 6/5/19 - I’ll take some updated pics tomorrow - I’m 95% sure I have FOUR out of four female plants. Just picked up some yucca to try - and I got some more led hangers so maybe I’ll upgrade the lights today - the rapidLED far red flower initiator isn’t coming until Wednesday unfortunately but I have two more SolStix I could add. Update 6/5/19 - far red flower initiator and the two (now 4) solstix are installed - I need to make a simple aluminum frame - maybe this weekend Picked up some 29% H202 to clean the rez tank and pumps and filter etc (not to put in the nutes for the plants tho!) Got a better air pump and airstone for the rez. New Vivosun oscillating fan - wtf!? Made for grow tents but can’t turn without stopping on the sides of the tent!? - I emailed them maybe it’s defective.
Likes
17
Share
Likes
13
Share
Been a tough week as my ph pen failed so had signs of defiantly But that’s now corrected so hope it didn’t set them all back too much But this girl really has rippened up fast so will start too flush her this week coming
Likes
14
Share
@Nvchods3
Follow
inicio floracion ( esperando tonalidad de la planta ) 👨‍🌾👨‍🌾