Recommended
Processing
Likes
Comments
Share
This week i defoliated on day 18 because i have way too many top coming out and too many lowbuds that were getting no light from being covered by layers and layers of leaves. All strains but the og Martian have real tight internodal spacing.
Processing
Likes
51
Share
11/24: Looks like the Emerson Effect/14 hour photoperiod is working...stretching has commenced.👍 11/25: Had to raise the lights 5 inches today. The big Sucrose Overdose and a Zkittlez are really stretching. I'm using platforms of varying heights for the shorter plants to keep the canopy level. 11/27: Raised the lights another 5 inches and fed today. 11/28: Raised the lights another couple inches this morning...now, I'm thinking I should have topped them...that's a foot in about 3 days...doh!😏 They're already starting to show signs of budding up, so I'll just have to do some supercropping and tie down the taller mains. 11/29: Raised the lights a couple more inches and supercropped the tallest Sucrose Overdose.
Likes
17
Share
@Rangaku
Follow
Big phatty is healthy as and ready to flip into flower, defoliating on the reg and spreading her out some more . Here comes the stretch
Likes
102
Share
Hola amigos! Hemos llegado al final de esta hermosa aventura, una planta perfecta desde su siembra, ni un daño por plagas, calor o exceso de nutrientes la afectó. Tengo que ser honesto y es que realmente me costó cortar la planta al final, olía a maravilla y con toques de alegría. Su estructura súper robusta me indica que debería cultivar una más y dejarla crecer libremente por más tiempo. Es increíble el tiempo de floración de esta genética, ya que en solo 7 semanas de floración está perfecta para cosechar 💐😍 Tricomas de gran tamaño cubren cada rincón de los cogollos y destellan bajo la luz. No hay mucho más que decir, disfrutemos todos de la magia del auto cultivo y seamos felices! IRIE
Likes
11
Share
@PanGrower
Follow
Do not pay attention to the temperature on the thermometer in the middle, it lies by a couple of degrees. I have a good thermometer on top of the box that shows the temperature. Day 29: After a terrible fracture, we see that the plant is beginning to recover. I'm honestly disappointed because it makes it very difficult for me to train mainlining and it will also increase the amount of time it takes to grow. Day 30: It looks much better already, I could superprune the right branch, but I don't want to stress it. I will try to bend the right branch harder, I will bend the left one a little in the morning the next day, maybe early. Day 31: This morning I cut the lower leaves, photo in the evening and continued the LST training after the injury. Photo in the evening. Day 32: I am completely sure that the plant has moved away from the stress, but we can see on the left circle, the right bud (and side) slowed growth. Day 34: I saw traces of salt on the tips of the new leaves, so now I pour water with regular 15 PPM.
Likes
13
Share
This week has been great.I'm glad that I was able to pull the plant when I needed to. The weather out here isn't always the best coming towards the end of October. How ever i handle it the best we can. What ive learned to do is wet trim before hang dry. Heres some phots of these glossing nugs. Iknkw ill lose a bitin water weight but im happy none the less. Fire 🔥 This has been a great grow, I learned a lot from Growing out here in new mexico. It was amazing to be able to train these plants 4 into one using training techniques. LST, HST, Defolation & topping all play a roll. It is fun to learn and sharpen my skills. I hope everyone enjoys my diary. Thank you so much Divine seeds. I appreciate the free seeds and the friendly community competition 👌 There's a lot of good growers outthere and I wanna learn from all. Much love ❤️ I'll be back with a smoke review soon
Likes
121
Share
@Rangaku
Follow
So Zkittles finally has the place to herself after the Pineapple Express was harvested yesterday ( it’s the fruit ) . With room to spread her out now she’s loving all that extra light and air flow and is becoming the biggest auto I’ve ever grown with a stench that needs covering up with candles and dryer sheets at the exhaust vent … ( good problems to have ) All going to plan a few more weeks of fattening her up some and it will be a successful grow .
Likes
Comments
Share
@UrbanBoer
Follow
Another Day another Dollar, a week later and I am starting to like being attentive when it comes to my babies, reminds me of the lock down days… dark times, but cultivation kept the days ticking and the mind clear. This Lady over has truly made a leap from her miniature pot to a whole 20lt highly rich compost mix, posted a video showing my mixing skills… it is getting warmer as the days progress, I am nervously awaiting the first Thunder storms, my makeshift greenhouse will be put to the sword, would be a sad day if that sword prove mighty, this structure has saved my babies through cold fronts, negative temperatures, speaking of weather the picture of the thermometer and my catalogued weather don’t correspond due to, The thermometer is showing my greenhouse’s room temperature, and I am cataloguing atmospheric temperature and humidity, I will get better in logging other such as water ph, for now all I know is I use rain water, and when I water I use 250ml of water per 24hrs, each plant to keep soil moist, I will increase the volume as soon as the morning temperature are at double digits. I cannot be disappointed with how this grow is proceeding. When Summer Shines it burns.
Likes
58
Share
@nonick123
Follow
Bienvenidos a la semana #4 Día #25 (05/06) Salir al exterior ha vuelto sedientas a todas las plantas (también hay mucha evaporación por la parte superior del substrato) Se riega con 250 ml de agua con Bio-Grow, Bio-Bloom y Top Max de Biobizz, ya que todas las plantas han empezado la prefloración Día #26 (06/06) Las Orion F1 no están reaccionando bien al LST. El crecimiento está estancado. No se si he empezado demasiado pronto o esta strain no lo tolera bien. Decido deshacerlo y dejarlas crecer libremente Tal vez retomarlo más tarde cuando empiecen a crecer las ramas laterales... Decido añadir 2 cm de substrato "nuevo" en cada maceta porque el nivel ha bajado demasiado. Entiendo que esto también ayudará a la estabilidad ☺️ Dia #27 (07/06) Todas las plantas han tenido que volver al interior por la inestabilidad meteorológica Crystal Candy XL Auto está creciendo como un cohete! Hay que ajustar el LST todos los días. Ya empieza a parecer una araña! Me encanta cuando veo estas configuraciones en los LST de los diarios y lo estoy consiguiendo 😁 Royal Bluematic también está creciendo muy rápido Northern Lights está algo más lenta. Espero que despegue cuando llegue al stretch Las Orion F1 han reaccionado bien al LST deshecho 😂 Día #29 (09/06) Hace un día soleado y las plantas vuelven al exterior 😋 Ha hecho un día muy cálido y todas las plantas están "secas" Se riegan todas con 250 ml de agua con ph ajustado excepto Northern Lights, que al estar en maceta de tela y más grande (15 litros), se riega con 500 ml de agua ph ajustada El riego siempre alterno sólo agua ph ajustado y agua con es con Bio-Grow, Bio-Bloom y Top Max de Biobizz y ajuste de pH Crystal Candy XL Auto y Royal Bluematic siguen creciendo rápido. Muy rápido en comparación con Orion F1 y Northern Lights que van más lentas... Día #30 (10/06) Hoy ha habido una sorpresa muy especial Crystal Candy XL Auto se está volviendo morada / púrpura! 😍 Al principio pensé que lo había visto mal, porque no he visto ningún diario en que esta strain se vuelva púrpura, pero la mía lo está haciendo! 😁 Estoy muy contento porque siempre he querido cultivar una variedad morada! 😁 Además, ha entrado oficialmente en la etapa de floracion Royal Bluematic sigue creciendo rápido y adaptandose estupendamente al LST Orion F1 parece que está cogiendo algo de velocidad Northern Lights sigue su crecimiento lento. A ver si se acelera! Día #31 (11/06) Esta ha sido la última semana de vegetativo. A ver si las que van más lentas aumentan el tamaño con el stretch! Esto es todo por esta semana Gracias por leerme!
Likes
8
Share
End of week 6- start of week 7- Plants are looking beautiful it’s about to be an amazing crop the biscotti mintz is still my favorite but a couple of the GMO Punch pheno’s are definitely starting to warm up on me along with the Cookies USA and their fat ass buds ! Honestly can’t wait till the day I can get a bigger space and follow my dreams ! I could grow weed the rest of my life ! I’ve been strain hunting for 2 strains I want to keep and I’ve already got one (Biscotti Mintz) hopefully soon I’ll find number 2!
Likes
37
Share
Edit: I came home from work after making my weekly log entry yesterday and I could smell my grow from my driveway... so I asked for help. THANK YOU OOZLEFINCH FOR THE HELP.. THIS IS WHY WE ASK FOR HELP... I left a question on here stating that my new canister wasn't working and asked for generic advise. He left an answer that pointed out the fact that my exhaust fan might be set waaaay to high... and it was! It turns out there's a limit to the amount of air that filter fan 'scrub', and my exhaust fan goes way over that limit even on 6 or 7.. I turned it down to 3 and the smell got better immediately. ☮️ Still on auto pilot at this point... I'm really close to harvest.. and I'm not even on day 60 😲. I created videos this weeks, they capture the plants in ways that a still picture just won't. My entire house stinks.. my neighbors are looking at my funny, and my wife thinks a family of skunks is hiding in our walls... I've never had this problem.. I even got a brand new carbon air scrubber and its not helping 🤣 Process/ Environment changes since last week: - To help preserve the terpenes I've been trying to lower my temperature, which is hard without an AC unit I'm not plugging in an ac just to grow some plants. I'm at 24- 26 degrees C (75 - 82 F). - I've been lowering my humidity accordingly to keep VPD in a good range - I lowered my lights closer to my plants, turning them up would just add to the heat. - I'm defoliating as much large fan leaves off as possible - My watering pH is at around 6.7 to 6.8.. I will not be flushing these plants - I rotate my plants every day to make sure I'm getting light to hit every node it can This week I'm pulling out the digital scope and doing the first trichome checks for these babies. The cheese auto is going to get the chop by the end of next week.. I hope you like the video I added of it.. it's the easiest plant I've ever grown and she's going to be FIRE. The blackberry auto is giving off a gas/berry smell and is very sticky to the touch. A beautiful triploid... my first and I hope to get many more. The Forbidden Runtz smells just like a zkittles does, it's bang on. Very dense very sticky buds. I almost tossed her during the seedling stage too due to her mutation. I'm glad I reconsidered ☮️ Thank you Fastbuds
Likes
26
Share
@MG2009
Follow
03/05/2021 Beginning of week 4 looking good, I think she will start flowering in week 5-6, so I might top her, she is growing fast so I hope it will not harm flowering time. Ps. I did top And 24 hours later I can see all is well, where I topped her is healing, and side branches responding! I know she will be ready for flowering. Check out video and see.
Likes
41
Share
Well the suns been out the last few days and the girls are loving it. I think I’ll start flush although it’s a little early for some others are ready. So a one or two week flush and then we are done. After that I’ll chop as each one is ready.
Likes
4
Share
@QixxGrows
Follow
Day22: As said in Week3, I will not keep this perspective for the whole grow, as it doesn't really show the size of the plant. But it gives a nice view of how to top leaves grow :) The flashes that you see in the video is the humidifier. It pumps out vapour every hour for 15mins. So basically a quarter of each second of the video will be when the humidifier runs. Day23: I changed it, as I wanted to see the size as well. Day24 - Day28: Happy, healthy growth.
Likes
36
Share
8/2: Started new batch of nutes. a repeat of last weeks nutes but with more CaliMag this time. Wednesday we will be bumping Rez to 6 gallons this week. Depending on how she is looking throughout the week we may start transitioning to Bloom nutes. Mixed as usual nutes in gallon jug of water. Transferred half to half gallon jug. Topped of Rez with half gallon jug of treated water. 8/3: Fed her today. Gave her the rest of the mixed nutes from yesterday’s feeding and also a full gallon of plain water. Filled rez to 3rd line today due to roots coming from bottom of bag into rez. Now that’s 6 gallons in the rez now. 8/4: Topped off Rez before bed with the half gallon of plain water. Started transition nutes this evening. Mixed nutes in gallon jug as usual. Poured half into half gallon jug. Filled rez to 3rd line using half gallon jug of nutes. Still some left over in jug. 8/5: Topped off the Rez with the rest of the nutes from half gallon jug. Split gallon jug of plain water into half gallon of water. Poured some of the half gallon of plain water into Rez until it was a little over the 3rd line. Bumped light intensity to 70% This evening topped of Rez again with the rest of the plain water from half gallon jug from earlier today. Then poured in SOME of the rest of the transition nutes left from mixing. 8/7: Mixed another round of transition nutes and fed from half gallon jug split. 8/8: Topped off rez with remaining half gallon full of mixed nutes for the week. Will need to water another half gallon of plain water before starting new nute batch tomorrow. Topped of rez to 3rd line with some of the plain water in half gallon jug. Topped of Rez again late tonight with the rest of water from half gallon. I can now start new batch of nutes tomorrow.
Likes
28
Share
Still got some slight burning of leaf tips more so on the right side of the tent. Otherwise, growth is good. Stratiolaelaps scimitus are now abundant in the soil. Pretty neat. GIBBERELLIN: Note: As gibberellic acid is not soluble in water you need to dissolve in alcohol first, Mixed 0.75g Gibberellic Acid 90% with 50ml of 99% Isoprponal alcohol , (Any alcohol will do but a higher % works better) also warmer alcohol helps dissolve the gibberellin. Mixed with 1000ml =1L of distilled water, bringing the concoction to 400ppm. 2000ml = 200ppm etc Every plant has a different threshold required to elicit a response, 400ppm is on the high end of the scale I've read to be careful with dosage as it's easy to over-apply, let's find out if it does anything like it described. Added bunch of enzymes, aminos, 5 or so different kelp. Can be kept for 1 week in the refrigerator. Nutrients for the week are recipe foliar application. The speaker (containing a 3 KHz signal and nature sounds) is played at high volume with high treble and medium bass for 10 minutes before spraying the plants. The plants are then sprayed while it's playing and the sound is continued for another 20 minutes after spraying. Both sides of the leaves should be saturated. Treatment is best performed early in the morning/daylight, preferably in foggy 65+RH% dew. On cold mornings, spraying should be delayed until late afternoon if outdoors. Do not spray plants when the temperature falls below 50o F. The formula also can be administered in the regular weather supply, by drip-feeding, hydroponics, etc.. The nutrient solution should be applied once somewhere in first 4 weeks, then twice weekly thereafter. https://biologydictionary.net/gibberellin/ Once a plant has sprouted past the surface of the soil, the endosperm is long gone. The plant must now rely on photosynthesis for food. However, the role of gibberellin does not stop at the seed. Gibberellin is responsible for many aspects of plant development. Further, plants produce many forms of gibberellin molecules, which act on different parts of the plant. In the image below, you can see the effects of a specific gibberellin applied to a plant. In number 1, no gibberellin was applied. Plants 2 and 3 both had gibberellins applied, with plant 3 receiving the highest dose. Gibberellin here encourages the plants to increase their internode length or the length between their leaves. In many plants, the regulation of gibberellin is an important natural process that regulates their height due to this process. At the cellular level, gibberellin is influencing the balance of proteins. In doing so, it encourages cell growth and elongation in the stems and between nodes. In some species of plants, gibberellin is involved in many more processes. These include flowering, fruiting, and senescence, or the natural death of leaves and other plant parts. Interestingly, many genes that regulate and adjust gibberellin levels are influenced by the temperature. Thus, when the temperature changes during seasonal change, the plants react to this as gibberellin levels change. This starts off many processes such as flowering and fruiting. Gibberellin molecules are involved with and interact with other plant hormones. The auxin level, for example, is directly related to the gibberellin level, and the two complement each other. Ethylene, on the other hand, tends to degrade gibberellin levels. Plants use these hormones, which respond to different inputs, to balance and react to inputs from the environment. These inputs signal various environmental conditions, which the plant is keen to take advantage of. Gibberellin Structure Gibberellin molecules of different types are synthesized in many different parts of the plant. Currently, there are over 100 uniquely identifiable gibberellin molecules. These molecules are synthesized in many cells of the plant, but tend to be concentrated in the roots. This is different from auxin, which tends to concentrate at the apex. Gibberellin is a diterpenoid, which is a familiar and highly represented molecule in biochemistry. It forms the basis of molecules like Vitamin A and Vitamin E. Seen below is Gibberellin A1, which was the first identified gibberellin. Other gibberellins have the same basic structure, but have various side groups attached. These groups affect where and how the gibberellin acts, which is how gibberellin can have so many diverse and unique functions in different tissues
Likes
13
Share
Dropped light hours down to 16 . Topped off nutrient solution with 5.0 ph evened out .removed none chosen phenos to be flowered in separate room no longer tracking those we will only follow the chosen mothers clones i cut clones today as well had the lady friend clean floor with bleach and dawn put clones in ez cloner 32 systems
Likes
33
Share
April 4th 2021 is Day 55 in Flower, Niagara's Own Seed says their Wedding Cake takes 50 -55 Days. These seeds are great 5 beans for $35 or $40 Canadian. Can't beat the quality and the price! Wish some seed company on here would offer such great prices! Trichomes are mostly milky viewed with a 60X loop. Plants are sticky and smelly. Buds are dense not an airy fluffy bud in sight😍. This is the frostiest bud I've grown to date I think. Some pistils are still white and sticking up straight while others look they are curling in. Since I didn't put up netting or bamboo stakes the branches aren't holding the bud weight so supporting with rope from ceiling hook works OK.
Likes
44
Share
Hi everyone, Weed brothers! Welcome to the new Peaky experience that consists in growing in vegetation some photoperiod bean together with other autoflowering for a few weeks before isolating them in another tent under a 12-hour cycle. BEST REGARDS
Likes
104
Share
_____ Week 10 | Day 71 - 77 | 3rd week of Flower ______ Day 71 🌞 - I mounted a fan below the net for more air circulation i need more defoliation 😅 Day 72 🌞💧 - 24 liters were mixed and distributed among the 8 plants / each plant 3 liter, at the moment I can water them every 4 days Day 76 🌞💧 - It remains every 4 days 3 liters of water each plant ____________________________________________________________________________________________ Light - 12/12 h - 560 Watt - 2x 200 Watt Toplight - 4 x 40 Watt Lightbars PPFD - 900 - 1000 µmol Temp. avg. - 22,9° Hum. avg. - 61 % RLH