Weathers been great, a little cold in the mornings, but sunny and 25c every day. Flowering looking great, close to week 5. All the LST done, now to just sit back and wait. Heavy top dress of compost mixed with 70/30 Gaia Green PB/AP (20Tbsp). Weekly spray of BT/Lactobacillus/Epsom, occasionally soil drench of Lactobacillus as well, which is 50% molasses (1-2 Tbsp per gallon). Still seeing tons of moth / caterpillar eggs on mesh netting, but the wasps are making short work of them. Nice even (almost) canopy is making for some great uniform flowering. **Bonus last picture** I had an extra GC FF as a "backup", planted same time but early flowered due to root bound 7 gallon I assume, notice all the single bladed fan leaves, stress maybe? Just harvested, looks good, but I'm sure my main plant will be much better.. Early flowering was sure nice.

This week has been a good one! Not too much more stretch just simply filling up both the spaces with foliage and swollen buds! I’m now watering 6L every 3 days and she’s soaking it all up! Will feed strong for one more week then 2 weeks of flush :) Dehumidifier turned on and set at 40%, ambient air temp dropped to 23/24 day time and 18 with lights off, air flow changed up daily to really help her. Getting keen to harvest/cure/smoke and then put in the next round! 😊 I hope all my followers and readers are well and have great holidays! Keep growing, keep smoking and most of all keep smiling! Much love! 👌✌️👍💐💨😎

TH 1Q2025 - Week 6 - Bolt 3 
(ON Haze X Original Haze) X Northern Lights #2 “Todd’s Haze” Objective - 8 Female Plants, Topped ONCE @ Flip, 12” when topped - Modified Sea of Green Week’s Objectives - Auto-Fertigation Installed and operational - Twice/Day, 440 ml/ Day (Initial Rate) - 220 ml/Event Weeks Observations - We have a smattering of pistils showing - looks like pre-flowers with Haze morphology - Confirms (for me) the known property of Haze - that 7+ weeks of veg (from seed) is required BEFORE the plants can initiate flowering. (Noting that CUTS will be ready to flower @ Flip. Seeds Wet: 1139PM, 28.2.2025 Germinated: 2.3.2025 Flip: 21.3.2025 Harvest: 77 Days, DATE: 6.6.2025 _________________________________________ __ Fri Apr 11, 2025 TH 1Q25 22:F:3:1 EC: 1.8 LightDistance: [ 20.5, in] # We’re in STRETCH, ~1.5”/day! LightIntensity: [ 640, µMol/m2/s] - [x] TM-7: [ 0.125, g] # Prep - [x] Fertigation: [8.5:8.5:3.4:3.4:3.4:0:3.4] # [Primer A:Primer B:CalMag Fuel:Silica Skin:Lush Green:Root Anchor:Peak Bloom] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant] - [x] PCAL 1660: [ 0.5, gm] # Once or Twice/Week - [x] TM-7 (µNutrients): [ 0.125, g] __ Sat Apr 12, 2025 TH 1Q25 23:F:3:2 LightDistance: [ 18, in] # We’re in STRETCH, ~1.5”/day! LightIntensity: [ 703, µMol/m2/s] LightDimmer: [ 85, %] We’re bringing up Intensity SLOWLY, as the plants adapt. Allowing the plants to grow INTO the LightField and naturally raise PPFD as it does. - [x] TM-7: [ 0.125, g] # Prep - [x] Fertigation: [7.8:7.8:3.1:3.1:3.1:0:3.1:0.0] # [Primer A:Primer B:CalMag Fuel:Silica Skin:Lush Green:Root Anchor:Peak Bloom:Resin Bloom] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant] - [x] PCAL 1660: [ 0.5, gm] # Once or Twice/Week - [x] TM-7 (µNutrients): [ 0.125, g] __ Sun Apr 13, 2025 TH 1Q25 24:F:3:3 LightDistance: [ tbd, in] # We’re in STRETCH, ~1.5”/day! LightIntensity: [ tbd, µMol/m2/s] LightDimmer: [ 85, %] - [x] TM-7: [ 0.125, g] # Prep dilution in 250 ml plain water - [x] Fertigation: [7.8:7.8:3.1:3.1:3.1:0.0:3.1:0.0] # [Primer A:Primer B:CalMag Fuel:Silica Skin:Lush Green:Root Anchor:Peak Bloom:Resin Bloom] - [x] TM-7: [ 0.125, g] # Delivered - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant] __ Mon Apr 14, 2025 TH 1Q25 25:F:3:4 LightDistance: [ tbd, in] # We’re in STRETCH, ~1.5”/day! EC: [ 1.9, mS/cm] - [x] TM-7: [ 0.125, g] # Prep dilution in 250 ml plain water - [x] Fertigation: [7.8:7.8:3.1:3.1:3.1:0.0:3.1:0.0] # [Primer A:Primer B:CalMag Fuel:Silica Skin:Lush Green:Root Anchor:Peak Bloom:Resin Bloom] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant] - [x] PCAL 1660: [ 1, tsp] # Once or Twice/Week __ Tue Apr 15, 2025 TH 1Q25 26:F:3:5 EC: [ 1.8, mS/cm] # [Primer A:Primer B:CalMag Fuel:Silica Skin:Lush Green:Root Anchor:Peak Bloom:Resin Bloom] - [x] Fertigation: [8.7:8.7:3.5:3.5:3.5:0.0:3.5:0.0] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant] - [x] Terps Plus: [ 2, ml] - [x] PCAL 1660: [ 1, tsp] # Once or Twice/Week __ Wed Apr 16, 2025 TH 1Q25 27:F:3:6 Stretched another 1.5” Main Canopy @ 740 (PPFD) Fertigation 1L/Plant/Day - 2 x 500 ml, 6 hour freq LightDistance: [ 17, “] LightIntensity: [ 740, µMol/m2/s] EC: [ 1.8, mS/cm] 
Fertigation Amount: [ 2.0, gal] # We’re a little low at a gallon/day … Light Intensity: [ 750, µMol/m2/s] # Adjust Light Height to Achieve. Light Dimmer: [ 100, %] # Photone is ok, but I think reads low . . . # [Primer A:Primer B:CalMag Fuel:Silica Skin:Lush Green:Root Anchor:Peak Bloom:Resin Bloom] - [x] Fertigation: [17.5:17.5:7.0:7.0:7.0:0.0:7.0:0.0] # [ 10, 4, 4] - [x] Photosynthesis Plus: [ 12, ml] - [x] Terps Plus: [ 2, ml] - [x] Quillaja 60 Powder: [scant] - [x] PCAL 1660: [ 2, tsp] # Once or Twice/Week’ __ Thu Apr 17, 2025 TH 1Q25 28:F:3:7 LAST HAND WATERING: FRIDAY We Start Auto-Fertigation Light Distance: [ 13.5, in] # 2“ Today EC: [ 1.8, mS/cm] # [Primer A:Primer B:CalMag Fuel:Silica Skin:Lush Green:Root Anchor:Peak Bloom:Resin Bloom] - [x] Fertigation: [16.9:16.9:8.5:8.5:6.8:0.0:6.8:0.0] # [ 10, 5, 4] - [x] Photosynthesis Plus: [ 12, ml] - [x] Terps Plus: [ 2, ml] - [x] Quillaja 60 Powder: [scant]

Day 64: Her buds are filling out. Still no trichomes and very little smell, but she seems happy and will probably just take her time to develop her buds. Reducing the watering frequency to give her some drought stress. Day 66: Trichome production slowly starts.

esta semana hice lavado de raiz, por mi parte me gusta aplicar un riego abundante y hacer una espacie de lavado es cosa de gustos de quien cultiva.

Cindy was a good plant. I dont had luck with the other planned ones, but not everytime gets everything good. I chopped the whole plant and defoliate a little bit. She's in the tent with 20,3°C and 53% Humidity.

Coming into the final weeks here, about a week and a half until harvest. Trichomes are looking just about ready.

Seeing LOTS of new growth this week already.

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Great growth has continued with no issues other than the occasional dew spot on the leaves as they thicken up! Turned light up to 215w from 100w, installed new exhaust fan and finally got the carbon filter in. The plants have stretched about 4" total. I did a pretty good defoliation this week removing about 6-8 massive clones that never broke through the canopy and a bag of lower and large fan leaves. I also started about mid week adding in the nutrients for bloom first Voodoo, Rhino Skin, Nirvana at 1/4 strength. Then gradually adding Bud Candy and Bud Ignitor with a little B-52 after defoliating while still using the Grow A+B. Switching to 12/12 after today and will apply one more dose of B-52 and Nirvana and ramp up to 1/2 Strength on the other supplements. Happy Growing!!!!

This week has been such a gift! I have learned so much about proper care for a plant I had no idea how little I knew sitting down and observing these majestic trees produce such a potent flower has really humbled me. Premium cultivars strain has shown resilient and self sustaining easy to grow traits that it is hard to mess up. (Which I’ve done a few times lol) Notice the trichomes (I put the zoom lens on and got up in there so they could be better seen the bud itself is slathered in them ! This is going to be an amazing smoke! Also looking at the structure of the bud it’s self it has volume very full bodied bracts with pistils throughout It’s just an all-around beautiful thing to observe

Looking good. Shes stretching like crazy! Showing some more little pistils on some bud sights. I watered her with nutes yesterday night and checked on her today and shes getting a little yellow i know its not light burn because i moved my light up higher the night before just in case. Other than that shes super green and is getting bigger in flower I just realized i did my math wrong and but double the nutes so im gonna water her heavy with some regular water Shes growing more bushy then she is tall. Shes stretched a bit but not to much yet. Im hoping tomorrow they look good. Couldnt get the best pictures cause my camera doesnt have macro

10/10 grow I recommend Speedrunseeds and granite haze

E sempre la settima n 17 però 3 giorni dopo l altra sunset con biotabs

Not going to grown this one so soon. There are plenty of better option from this seed bank. Could not reach buds as good as they ones from hulkberry. It's a bigger plant with more banana like buds and not so dense and round. But still a strong high and enjoyable smoke.

Plants looking great. Final week, flushing with filtered water for 7- 10 days. Plants ripening nicely, very dense colas. I noticed a spider mite outbreak last week, it has spread from one plant to the a few others, not a bad infestation, today predator mites will be released onto every plant throughout flush. Predator mites have worked great in the past. **predator mites phytoselius have been applied, hopefully they can clear up the infestation before harvest. When the plants are cut down and hung to drt any remaining mites will crawl up the stem as the plant dries. I will wrap the stem in double sided sticky tape.

She is getting fat! What a great plant she is - again, little to no deficiencies, other than some light burn but I could not complain to have such strong genetics for my first ever grow! Trichomes are not too cloudy, so still a while to go but what an AUTO!

Today start of week 10 (Day 70) 😎😵😏 with Trailer Park Mod 😂😂😂😂 i had old fans around here and a ice box, so i startet to build the 7 watts Trailer Park Fans Mod 😁😁😁 It´s Monday Day 71 and "Hilde" got another fertilizer shot today from Day 72 to Day 75 i was on a Road Trip... 😳😎😳 Back from Road Trip and "Hilde" got another fertilizer shot today 😎👍😏

She is adjusted to the LED and she is loving the organic nuetrient and tea.