First full week in 1 gallon pots. They will need to be topped soon, most likely between this weekend and early next week before update. After the light goes off, I've been foliar feeding with a fine mist of 1:4 dilution of my usual hydro vegetative solution: 3.5 grams of General Hydroponics MaxiGrow, 3mL of Botanicare Cal/Mag, 4mL of Botanicare Hydroguard per gallon. adjusted using General Hydroponics pH down. Solution is stored in an aerated bucket. Will be moving to a 1:1 dilution.

So far so good... removed most of the lower branches at the very end of the week...let's see the improvement in the week to come...also with the stronger branches that where removed tried my hand at cloning again( y not see if I can get more trees) just have to wait n see

Day 71 H20: 3 lt A+B: 9ml Rz: 1.5 ml Zym: 7.5 ml Bt: 6 ml C/mg: 5 ml ============================================ Day 72 H20: 3 lt A+B: 13 ml Rz: 1.5 ml Zym: 7.5 ml Bt: 6 ml C/mg: 5 ml ============================================ Day 74 - 76 - 78 - 81 H20: 3lt A+B: 11 ml Rz: 1.5 ml Zym: 7.5 ml Bt: 6 ml C/mg: 5 ml Been a tough week for my girl. We have had two heat waves inside the past two weeks, outside temps were around 40C and the room got too hot even with my aircon on. Resulted in some yellowing leaves in the center directly under the light. Despite the heat the buds have fattened up but they are still not very solid. So I have put her on straight H20 and I'm checking for amber trichs, then she will be harvested. Before my next bean goes in I'm going to try to get a bit more room by moving a wall. I need to get more cool air going in and it's cheaper than a new exhaust fan at this stage. Only thing now is to choose what Mephisto plant to plant next: Hubbabbuba Toof decay or White crack What do you think should be my first Mephisto grow?

Last week next week to harvest.

10/10/21 new week for Hyper glue Growing almost a month now did some topping last week and today started to LST the main everything going great so far plants loving the new FC-4800 so as i absolutely no extra heat is coming of them 👌🏻 I maybe will top some more but as far it Goes for LST this will be the only thing i will do to the plants let the rest grow freely one hyper glue has to wait for main LST 12/10/21 The other hyper glue got LST clip on the main and think this was one of best ones so far 14/10/21 Growing very nicely giving them the watering and nutrients when they need it . I am trying to understand plants better by looking at feeling soil etc instead of a regiment. And learning we do every day because bin growing in 11L pots but now in 8L pots so that means that there gone be smaller then my first grow . But hey got now 12 plants going on and not 4 so that will help lol 15/10/21 Did some small defoliation and some of them get light penetrating better visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Fully marshydro supported Setup: Marshydro GT120x120x200 Marshydro FC-4800 LED lamp Mars Hydro tent handy info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter.

10/16: A lot of stretching happening this week. I had to move the light up 3 times and even then the main cola of #1 grew into the light and got a little heat burn on the leaves. They are starting to build flowers. This will be a fun week as i should start seeing some purple in the flowers and leaves if I have one of the phenos that has the really deep purple. I did successfully clone all 4 plants, but ended ip with a powdery mildew issue in the propagator and so i may just throw the clones out as all of their rock wool cubes have some on it and i am not sure how to clear it up before putting them in soil. Will probably post a question about that. These ladies had a defoliation a week ago and clearly already need another. I over vegged for sure. I am not sure i am going to defoliate this week, and will probably just let them grow unbothered. Im hoping yo only have to defol one more time and so hoping to wait until they have finished their transition.

Only water and no water for the last 5-6 days. Also no light in the last 24 hours.

Been an awesome week 😎 Lots of things going on last week.. We started LST, made a few adjustments, gave the ladies a haircut, and further refined the nutes👍 Looking forward to seeing some signs of flowering this week. 🙏 I had believed that I was a man of patience 😅 Stay tuned for pics and videos throughout the week.🙌 Happy Growing! 🤙💚💪🌱😎🌱💪💚🤙

14 days drying

Tag 65: Heute habe ich die Pflanze dann seit langen mal wieder aus der Box geholt, die ist komplett abgeknickt 😱 ich habe sie mit Mühe und Not wieder in die Box buxiert. Vielleicht muss ich noch nachhelfen, aber sie ist nirgends gebrochen.😇

I tied down and defoliated twice in the week and have switched to 12-12 yesterday so they’re transitioning now and should be in bloom by week 7! I made some extract them made some gummies successfully I might add and added the photos in the diary!

This week was all about preparation & making sure i got enough of everything at the spot

This two were part of another diary and got moved out due to space reasons at VW8 and moved back indoors at VW20 https://growdiaries.com/diaries/218151-auto-god-s-glue-grow-journal-by-yan402 13.09.25 VW21 Both are looking good and are developing tighter nodes than when they were outside, I'm going to have to keep cutting them back every once and a while I also applied nematodes against thrips and fungus gnats. 20.09.25 VW22 some spots and some yellow leafs, I think it's a root problem, probably root bound, but both seem healthy and are getting thicker so maybe just top up with Coco coir and give a slight different nutrient schedule less Tri Part Bloom could do the trick MAYBE lol. 27.09.25 VW23 Topped up the pots with extra coco coir and trimmed the side roots a bit, both plants were root bound 📹 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 27.09.25 VW22 – Fed 3l of #1 → 2l runoff 28.09.25 VW23 – Fed 3l of #1 → 2l runoff 29.09.25 VW23 – Fed 3l of #1 → 2l runoff 30.09.25 VW23 – Fed 3l of #1 → 2l runoff 01.10.25 VW23 – Fed 3l of #1 → 2l runoff 02.10.25 VW23 – Fed 3l of #1 → 2l runoff 03.10.25 VW23 – Fed 3l of #1 → 2l runoff 04.10.25 VW23 – Fed 3l of #1 → 2l runoff (*RUNOFF reused for tomato plants) 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30L #1 🍶💧🍶💧🍶💧🍶💧🍶 💧 TriPart Micro: 10 → 30 → 40 ml = 0.33 → 1.00 → 1.33 ml/L 🍶 TriPart Grow: 0 ml = 0.00 ml/L 💧 TriPart Bloom: 10 → 30 → 20 ml = 0.33 → 1.00 → 0.67 ml/L 💧 Cal-Mag: 60 ml = 2.00 ml/L 🍶 Home-made FFJ/FPJ (new fish batch): 30 ml = 1.00 ml/L 💧 pH Down: Citric acid (BuxXtrade) — adjust to ~pH 6.0 📦 TOTAL : = 160 ml per 30L = 5.33 ml/L 🍶💧🍶💧🍶💧🍶💧🍶 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ✂️⚙️✂️⚙️✂️⚙️⚙️✂️⚙️✂️⚙️✂️⚙️ 🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 🦄Fantasy Feast ( Seeds)🦄 🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒🍭🍬🌈🍒 Species: Hybrid (Regular) Genetics: The mother is Unicorn Whip by Dirty Bird Genetics. The father is Charcuterie by Cannarado Genetics. Effect: Unknown Mixed effect body and head high Flavor: Some phenos are Skunky gassy fruity, some are fruity sour citrus with a chemical touch and a touch of skunk Flowering: Estimated 8–10 weeks Resistance: Strong — Testing phase done

Still just a baby. Slowly watering the soil and foliar spray plain water

Time for drying. Btw drying them like this was a bad idea buds are pressed from one side may be conceded to move them, well I still prefer hanging drying 🤪

Day 53: I have a feeling that a bigger pot is necessary for FIMmed plants. Defoliated Lemon a little bit (used her leaves for a morning shake 😁). Some of her leaves are turning lime green, not sure what that's about. Overall excited about their day to day growth from now. Day 55: Followed some advice and tried to add some Cal in the form of chamomile tea. Ended up trimming the already deficient leaves will see what happens later on. Could also be light burn from the plants getting taller. Lemon Pie is showing the purple phenotype which I love!

Que pasa familia, vamos con la cosecha de estas Orange Sherbet Fast Flowering, de FastBuds. Por dónde empezar, las flores son poco compactas pero van repletas de resina y unos aromas bastante dulces y citricos Es muy sencilla de cultivar, es de ciclo corto aunque también si le dais una semana más no pasa nada agradecer se agradece al final. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨💨

i think pistills are changing more oranger this week.. but i guess buds are not growing fat this week .. something isn't right...