Likes
Comments
Share
6/4/2 goddamn I'm loving this plant. The underneath of the fan leaves turn a deep magenta. They will look so beautiful contrasting with the buds
Likes
4
Share
Hacemos domingo 4 mayo te aireado y echamos 22 gr de top dress
Likes
8
Share
@Salokin
Follow
The week went very well, the plant stretched for an additional 15cm and is now showing the first proper bud-sites. Had to change the nutrient solution after day 5, as the tank was almost empty. I increased the nutrients to a 1000 ppm, which caused a tiny amount of tip burn, so will not be increasing it next week. The second scrog net helps greatly spreading out the canopy, I will continue with a very light LST during the flower as well to guarantee maximum light exposure for all bud-sites. I am enjoying this grow very much, first time in a while for me to grow photos inside and I think I will continue growing photos, it seems they are a bit more forgiving and I feel that I can take the time to really let them fill the tent. On my previous grows I usually had 3 autos in there, which would always lead to issue in regards to some plants growing quicker than others. I have a very optimistic outlook in regards to harvest, which I will keep yo myself in order to not jinx it, but as you can see it looks promising. Thanks for reading. Until next week :)
Processing
Likes
3
Share
@Reaper
Follow
the buds are very small, i had the same problem on the motherplant that i grew in hydro, its just a very bad phenotype, i had 2 of these in the package of 10 seeds, 8/10 was very good plants with very big yields of 125 grams/plant wich took very less space in the growroom. i yielded 170grams of this pheno in the rdwc system but the plant was very big ( took almost the whole tent in) so i reccomend not groIng this in hydro, it also finishes faster in soil with autumn colors at the end. i have a feeling the buds will get more weight in the coming week this is also only a 104watt LED.
Likes
11
Share
I've been feeding just water and allowing them to dry right back , I will harvest once the soil is dry again .
Likes
4
Share
Mini Wool Cube, placed in an 11 liter pot, peat, perlite Watered without much drainage, this mini cube has settled into its new location, a vision of how pH can be managed by mixing these media. Light soil only peat/perlite, so I am watering avoiding high runoff. Just what it takes to see the output track Foliar application, certain time after the twilight of the lights. I placed the LED closer to the cup.
Likes
26
Share
The buds are noticeably swelling up, getting thicker and more solid every day. They’re really starting to take on that dense, compact form I’ve been hoping for. It's amazing to see them take shape, becoming more compact and substantial. The plant seems to be doing really well overall—healthy, vibrant, and strong. Every day, I'm noticing more trichomes forming on the buds. It’s a sure sign that everything is progressing nicely, and resin production is in full swing. I’m eager to see how things will unfold in the coming weeks. The excitement is building as I get closer to the final stages. Can’t wait to see what’s next!🌱
Likes
12
Share
Training went well gonna leave them to ride abit longer and go again
Likes
41
Share
Already showing some flower buds. It's developing well. Did some hard defoliation. smells good
Likes
8
Share
Top Gun #2 finishing up nicely, checking for mold every day, humidity is back in the 50s. I just trimmed up Top Gun #1 yesterday. 9 day dry, humidity started dropping into the 40s the last couple of days. Only one other tip of the buds had some mold on it. I’m smoking it idc🤷. Total dry weight was 50grams minus the molded buds, I’ll make butter with those. Small plant but smoking it right after drying it was one of the best things I’ve tried, very proud.
Likes
49
Share
@Hashy
Follow
Light settings 12/12 on at 9.00am off 9.00pm Light power= 62% 150w Radiator settings LIghts on Turn on if temp drops below 23c Turn off if temp goes above 23c Lights off Turn on if temp drops below 19c Turn off if temp goes above 19c Dehumidifier settings LIghts on Turn off if humidity drops below 60% Turn on if humidity goes above 60% LIghts off Turn off if humidity drops below 62% Turn on if humidity goes above 62% Extractor settings temperature 24c with 1c steps Humidity 54% with 2% steps Max speed 9 Min speed 4 VPD aim 0.8-1.2 Wednesday 1/3/23 Day 36 Autofeed 5 15 minute runs Water 10L Ec=0.21 Ph=6.5/7.0 3L left Roughly 2.3L each. #2 run 0.1L Ec=3.86 Ph=5.7 7.15pm Lowered light 3cm #2 DLI= 25.5 Thursday 2/3/23 Day 37 10.00pm Extractor settings temperature 24c with 1c steps Humidity 54% with 2% steps Max speed 10 Min speed 5 Friday 3/3/23 Day 38 Autofeed 5 15 minute runs Feed 10L Ec=1.73 Ph=6.3 2.5L left. Roughly 2.5L each. #2 run 0.6L Ec=2.14 Ph=6.1 Saturday 4/3/23 Day 39 5.00pm #2 Height= 30CM Dist= 38CM DLI= 26.6 Lifted lights 3 clicks and Lst and defoliate Sunday 5/3/23 Day 40 Bit of Lst and scrogging Monday 6/3/23 Day 41 Autofeed 5 15 minute runs Feed 12L Ec=1.78 Ph=6.3/6.3 4.5L left Roughly 2.5L each. #2 run 0.25L Ec=2.4 Ph=6.1 #2 DLI=26.9 Lifted light #2 Height= 31CM Dist= 45CM DLI= 20.7 Tuesday 7/3/23 Day 42 (Day 14 flower) Radiator didn't come on when it should have. It was cold today and I don't understand why the sensor didn't trigger the Radiator. #2 Height= 31CM Dist= 45CM DLI= 20.7 The 2nd week of flower has gone well. I have tried to keep the canopy of the overall grow as level as I can, the only problem with running different strains is they all have different traits and grow at different speeds. Nearer the end of the week the weather started getting cold again so the radiator is going to be working a bit more over the next week or 2. #2 Tropicana Cookies FF stil hasn't started stretching, she is mega bushy and has quite a cool funky look to her, I haven't managed to spread her out as much as I wanted to so I'll hope she will be OK. Power used for week Light (1.77+1.84+1.84+1.84+1.84+1.83+1.84)=12.8Kw Extractor (0.19+0.24+0.25+0.27+0.31+0.31+0.41)=1.98Kw Fans (0.48+0.47+0.47+0.47+0.47+0.48+0.48)=3.32Kw Dehumidifier (0.69+0.65+0.0+0.01+0.6+0.02+0.69)=2.66Kw Radiator (3.3+3.98+3.38+3.16+3.8+3.31+4.07)=25.0Kw Water pump. (0.02+0.0+0.02+0.0+0.0+0.2+0.0)=0.24Kw Total for the week=46Kw Back in a week. Thanks for stopping by.
Likes
7
Share
After super cropping plant responded very well, growing faster and stronger. This is my first time using this technique and it is the bestest way I found to have a nice looking yield
Likes
Comments
Share
Likes
51
Share
Gracias al equipo de Anesia Seeds, XpertNutrients y Marshydro sin ellos esto no seria posible. 💐🍁 Smashberry Fumez: Adéntrate en la humeante bruma de nuestra nueva Smashberry Fumez, donde la dulzura de las calles se encuentra con el octanaje del oráculo. Esta iniciadora de incendios feminizada es una mezcla de Candy Fumez y nuestro éxito de ventas Oracle Octane, que logra una armonía increíble con un 60% de Indica que te permitirá relajarte profundamente mientras mantienes la cabeza en las nubes. 🚀 Consigue aqui tus semillas: 💡FC6500: Eficiencia líder en el mercado: la lámpara de cultivo LED FC-E6500, que ostenta un estatus líder en el mercado, es una solución rentable con un PPE de 2,8 µmol/J y un rendimiento máximo de 2,5 g/vatio. Ofrece un PPF alto de 2026 umol/S y es adecuada para una cobertura de vegetación de 1,50 m x 1,50 m y una cobertura de flores de 1,20 m x 1,20 m. Iluminación versátil y uniforme. https://marshydro.eu/products/mars-hydro-fc-e-6500-730w-commercial-led-grow-light/?gad_source=1&gclid=Cj0KCQjw1qO0BhDwARIsANfnkv9IIrYSbmJqz8PqpJOIyWwJfp5bc3SGJgUV68USLQ4tjmXDYwoBuAsaAue3EALw_wcB 🚥 MarsHydro ADLITE UV/IR/RED: Para lograr un crecimiento óptimo de las plantas y maximizar los rendimientos es un arte simple que depende en gran medida de las condiciones ambientales adecuadas. Reconociendo las limitaciones de la iluminación natural y las soluciones de iluminación tradicionales para satisfacer estas necesidades únicas, lanzamos ADLITE. Estas luces especiales UV, IR y roja están diseñadas para llenar áreas del espectro, proporcionando las altas longitudes de onda que las plantas necesitan para un crecimiento y desarrollo óptimos. 🚀 Consigue aqui tu Adlite: https://marshydro.eu/collections/adlite-supplemental-lights/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 12: Última semana de lavado de raíces y cosecha la siguiente semana, ha quedado una planta muy compacta y totalmente cargada de resina.
Likes
2
Share
@TTerpz
Follow
Buds starting to form!!!! Day 2 of week 8 4/3/25 UPDATE: Flushed with Fox farm sledgehammer ph’d at 6.8 Soils were low at 5.8 4/5/25 update: fed with nutes 4/7/25: watered with plain water ph’d at 6.5 4/8/25: did a slight heavy defoliation to get ready for week 9!
Likes
3
Share
@Mackey
Follow
Raised light and reminded a few branches. Everything's going smooth.
Processing
Likes
5
Share
She's looking very happy and healthy,let's see how this wonderful lady performs,looks like she's not gonna be very productive but always quality over quantity. Hope you guys enjoy. This lady has started the 4 week since planted on August 26th but also it's the start of her 1st week of flower,let's get the job done! 🔝💎💚✌️
Processing
Likes
3
Share
Very happy with the size and shape, exactly what I was hoping for. Almost cured the copper defiency then the rain started and I haven't been able to feed the problem plant. Should have it sorted by next update!! 🙏🙏 They have all had strength training but seem to straighten themselves out on the same day and continue growing!
Likes
2
Share
Update week 2 of Bloom