This week I've been pulling the top fan leaves to stop the plant growing taller and to allow the side branches to catch up. I also started feeding them. I will probably repot and switch to flower next week now they've all outgrown their mutations.

Buds showing great and started on day 10-11 of 12/12. I’m happy with the progress so far but I could dial the feed back a little bit and I’ll be adding in more light for a better footprint during week 4 of flower

Day 39 from seed!! I’m exited to watch the explosive grow of this genetics soon i will be take some clones or each pheno to take the best and put in the next batch!!! Stay tuned

Terminando la 3era semana de floración

Week 6 looking lovely

Soooo, nach langem Warten (ich bitte um Entschuldigung, es kam immer irgendwas dazwischen), nun die Ernte! Nachdem ich jetzt alle Sorten verkostet habe, kann ich euch nun mein Fazit präsentieren. Im Großen und Ganzen bin ich eigentlich ganz zufrieden mit dem Ergebnis, muss aber auch gestehen, dass ich bei der ein oder anderen Strain doch etwas mehr erwartet habe. Bei den nun folgenden Bewertungen möchte ich noch anmerken, dass sich diese rein auf den Outdoor-Anbau der jeweiligen Sorte und nur auf den einen bekannten Phäno beziehen. Man kann grundlegend behaupten, dass sich alle Sorten doch sehr solide geschlagen haben, und das bei diesem … naja, sagen wir mal wechselhaften Sommer. Allerdings merke ich einfach, dass sie lange nicht ihr volles Potenzial ausgeschöpft hatten, was ich immer etwas schade finde. Ich bin trotzdem froh, dieses Projekt durchgezogen zu haben, und gehe mit reichlich neuen Erkenntnissen sowie einem abwechslungsreichen Stash in die besinnliche Zeit. Was hat mich grundlegend bei den meisten Sorten gestört? Bei fast allen Sorten, mit Ausnahme der Hella Jelly und der Lemon Tree (wer hätt's gedacht), waren die Terps doch sehr flüchtig. Im Vape kamen sie wirklich gut zur Geltung, wenn man sie allerdings im Joint (pur, versteht sich) geraucht hatte, haben sie oft nach den ersten Zügen an Präsenz verloren, was wirklich schade ist. Dies ist aber wahrscheinlich auf die Anbaubedingungen zurückzuführen und soll den Breedern keinesfalls ihre Qualität absprechen. Wie schon in einem vorigen Kommentar erwähnt, haben sie einfach nicht ihr volles genetisches Potenzial erreichen können. Ich bin mir des Weiteren auch nicht sicher, ob ich beim nächsten Mal wieder auf die Dryferm-Bags setzen werde. Es war doch ein ziemliches Gefummel, bis man die Blüten ohne Kontakt zueinander in die Beutel verfrachtet hatte. Außerdem hat es meiner Meinung nach die Trocknungszeit eher verkürzt, obwohl ich mich an die Temperatur- und Luftfeuchtigkeitsrange gehalten hatte, was ich auch nicht unbedingt begrüße. Und zu guter Letzt sind sie auch echt nicht billig, wenn man bedenkt, dass ich pro Pflanze teilweise über 4 Beutel benötigt hatte (pro 3 Stk. ca. 25 Euro) und sie laut Hersteller nur dreimal verwendet werden sollten. Das ist doch auf Dauer ein ganz schönes Investment. Aber das sind nur meine 2 Cent zu dem Thema :). Nach und nach sollten jetzt hier die Erntereports eintrudeln. Ich hoffe, ich schaffe alles heute. Falls nein, seht es mir bitte nach. Falls ihr noch spezifische Fragen zu einer Sorte habt, lasst es mich einfach wissen, dann bekommt ihr noch eine ausführlichere Beschreibung. PS: Die Filmore-Slim musste ich leider fast komplett entsorgen. Sie hatte die festesten Blüten, die ich je bei einer Outdoorpflanze gesehen habe, was ihr leider zum Verhängnis geworden ist (durchgeschimmelt). Von ihr hatte ich leider keine rauchbaren Blüten. Von der Optik war sie auf jeden Fall ein Champion! Ich habe von allen Sorten Fresh Frozen in der Gefriertruhe, die ich in der kommenden Zeit wachsen möchte (auch von der Filmore Slim). Also kann ich sie hoffentlich als Konzentrat verkosten. Das soll es gewesen sein. Ich wünsche euch viel Spaß mit den folgenden Ernteberichten und eine ruhige, besinnliche Weihnachtszeit mit euren Liebsten! Wir hören uns dann hoffentlich im nächsten Jahr wieder, mit vielen neuen spannenden Projekten.

This week seem like the plant didn’t eat much of the fertilizer so we decided to push the Co2 up a bit, but its still drink crazy amount of water. Some of the plant were starting to smell and also getting a bit frosty. Hope that everything will be all good, have a good day to everyone who reading this Cheer!🔥🙏🏽🙏🏽🇹🇭👍🏻

✋Wk10: Playing the guessing game and learning is doing. 👉I started the week knowing I needed to do more of a full low EC rinse. I have been noticing purple stems around both plants spreading. As the week started the stems also started spreading on to some of the veins. The upper leaves started looking lighter green colored and by mid-week some yellowing spots and some very small brown spots on some of the upper leaves of the 3 gallon. The one gallon was getting more burned leaf tips. Until the yellowing splotches and small brown specks I was suspecting low Magnesium. I was compensating by adding a little extra cali-magic to the low ec solution I use to adjust the ec of the solution I fertigate with. But as the yellowing spread I knew I was wrong about something, so a little more searching and I may have nitrogen toxicity AND Phosphorus deficiency. The upper leaves on the 3 gallon plant were also showing a bit of ‘clawing’ which was pointing at the Phosphorus shortfall. So I may be wrong, but Ill only know by doing. So I did a large low EC rinse that was pH’d with the regular dosage of liquid Koolbloom, on both plants at the end of the week. I’ll continue to fertigate with a lower EC solution that will have the Koolbloom mixed at full strength. I may discard the current solution batches and remix fresh with less of the Flora Micro, more of the Flora Bloom and Liquid Koolbloom. It may all stem from not doing low EC fertigations as a matter of routine. Perhaps the Nitrogen was building up because there wasn’t a regular higher volume rinse. The Low EC rinse dropped the EC of the run-off right away. I know the common practice is to have routine low EC rinses, but I wasn’t having high EC run-off and it was stable, so I was trying to keep the nutrient level in the media at optimum levels. Doing one plant at a time is a very slow way to learn. I do read lots of science related gardening articles as well as scientifically inclined cannabis articles. I don’t look at too many forums because most of these people must be high ;) 👉I finally got around to clearing out some of the lower leaves from the 3 gallon plant and removing some of the leaves and shaded buds sites under the dome. Its still a thick tangled jungle. But more manageable. Doing tucking to give cola sights light. The buds are bulking up. The first signs of frost have appeared as well. Hopefully I can level out the nutritional needs and the buds will be fine. The trunk of the 3 gallon has gotten very thick. Its a work of natural engineering to support the plant. The branches are also very stout and strong. 👉The 1 gallon is making some potentially nice colas. Each branch is a long cola covered with buds. Ive added a little support to some of the branches, even though the branches dont need the support yet. The aroma is creamy caramel. Its almost bizarre to me. The plant has the light skunkyness that is typical of cannabis in flower, but that aroma is the undertone of the dominant smell, which is creamy caramel. Such a strange and wonderful combination of smells is almost as intoxication as the gorilla glue I grew last spring. The trichomes are mostly clear with cloudy ones making a showing.

S1 62g S2 67g S3 81g S4 74g Total 284g

02/07/2026 A new week and I believe we are starting the pre-flower stretch... Maybe. I'll ve leaving the nutrients alone for some of the week. I need to make sure she's in stretch or not before I change out my nutrients. She's already got white pistils and is 14" tall. That's 5" in a week. Not too shabby. Now if we can get an inch or 2 a day from here on out, I'll be very happy. Once I know the stretch is in motion, I think that's when I start changing out the nutrients. Like bud if itor and big bud. Oh and bud factor x. These all go in on week 5. Which should be this week, BUT I started the veg cycle early. So it's really a week behind. In that regard, I should be keeping the same mix as last week. So I'll compromise and change the water out when I know we are stretching. I snipped the main stem fan leaves as well. It was definitely a good idea. Now the branches have space to grow and not be impeded by massive fan leaves bigger than my hand. I left the very top two fan leaves as I like to do. I feel like the leaves are too new to snip off. Once the node gets a little bit older, I'll snip them off as I go. Speaking of nodes, she has 8 and is working on 9. But then I think that's it. From here on out, she'll be stretching the main cola. I have to figure out a way to tie the top down so the rest of the branches can catch up. I hand bend it, but not enough. I would need to be in the tent like 4 times a day. Not that I mind, but like 4 times messing with the environment will be a pain. The heater is overheating as it is. I'm gonna have to swap it out. Not sure how it's overheating. It should be on like 4. But then again. It's 1° f outside today. Wind chill is -17° f. So maybe it's trying to compensate. But it's like 70° f in the apartment. Outdoors can't play that big of a role, surely. Anyway, on top of popping some leaves off, I cleared out the small bit of growth under the canopy. The goal for this run is to properly defoliate and prune an autoflower. Only keep the top 2/3 of the plant. It won't be very hard to be selective with this plant. Everything is so very uniform. Something that's pretty cool is all the bud clipped branches are starting to grow at the same time and seems to be the same pace. This should level out the canopy to table top flatness. The only thing that will bother me is the top. Considering the fact that I couldn't tie her down, her top buds will be bigger than the canopy buds. Which is ok, but I want a sea of buds, not a nipple. We'll see how it turns out. Maybe if I hand train the top down, for a couple days, the branches will start to catch up. So I'm still considering the trellis net. I'm not sure though. I do have an air pump specifically for this purpose, but like how the hell am I gonna clean the bucket out weekly? There's just no way. None that I can think of. I mean I could slide the roots to another bucket for the time being, but how will I remove the bucket without lifting the plant? I don't know. Well, water pump it is I guess. That's only if I use the trellis net. Very possible. However, her branches are super strong and will definitely be able to handle heavy buds. And lots of them. The environment is looking good today. Happily it's stable, it at the cost of an overheating heater. 02/08/2026 Looking good today! I believe she has started the pre -flower stretch. She sucked down a little under a gallon in 2 days. So that's good. I'll be changing the water out tomorrow for some fresh nutrients. I think I'm supposed to start the transition from grow nutes to bloom nutes as well. I can't remember if it's before or after the stretch. I'm thinking after? I need to research this. After a bit of research, it seems bloom nutes start after the stretch. So maybe I won't be changing the water after all tomorrow. Who knows. I must research more. Other than that, she is a beautiful plant. Stretching out her side branches almost enough for me to be able to bud clip them. Currently they are long and thin and already leaning out, so no sense in training them yet. I'll wait for them to start really stretching. Then I'll do some more training, maybe. We'll see. What I've done so far might be enough. The goal is to fill half the tent. Front to back. Then the other plant does the same thing and I have a full tent. They have to stay a little thin and less wide though so they don't encroach on the others space. The humidity and temp are just wrong. The AI doesn't seem to get the fact that less is more. Oh well. It's pretty decent. 02/09/2026 Omg she is looking great! 16" now and just started the stretch. Beautiful greens and super thick stem. The branches aren't as thick as the blue dream in the tent, but they are definitely thick and sturdy. A little easier to bend too. But the internodal spacing on the branches is too short to fit clips in. So I'm going to wait until the stretch really gets underway. Auxiliary branches are starting to get pretty long too. But they're already horizontal, so no sense in bending them. Well, yet anyway. They'll start lift up soon enough. I might have to raise the light soon. It's 17" from the canopy. I want it higher and brighter. I'll probably wait for 15" then raise it back up to 22" and increase the intensity to probably 6 or 7. We'll see. Currently the DLI is 38 mol. I'd say perfect for this age. Very close to 40 but not there quite yet. Perfect. The environment looks alright now. I attached the hose to the humidifier so now it's dropping from above and is much more stable. Once I lift the light up higher, I'll feel much more comfortable. The fog is really close to the light. 02/10/2026 Well today is the day. I think. So I noticed the tips of the top growth starting to turn yellow. Definitely a deficiency. I'm guessing nitrogen given the need for it during the stretch. But what I'm going to do is increase the nutrients from 2.5 ml per gallon to 1 ml per liter. There's 15 liters, so it's half of what the recommended dose is. It should be fine. Readings after water change. pH: 5.8 EC: 880 TDS: 442 Temp: 64.4° This might not be enough nutrients. But we'll see for now. 02/11/2026 So I'm pretty sure I screwed up again. The water temp was definitely higher than 70° this morning because I forgot to add an ice bottle last night. So naturally there were bubbles all over the place. Like big bubble foam. Not sure if that's good or bad. But if it's bad, that's what Hydrogaurd is for. We'll see what happens now that I got the water to cool down. On a better note, she's still growing strong. Leaves are getting bigger, she's stretching and branches are making more branches. Lol. The environment seems pretty good now. No issues with the equipment specifically the heater. I raised the light yesterday and increased the power to match. Now the DLI is at 39 mol. Just under 40. I'll bring it over 40 after the stretch. I have CO2 in the tent, so I could go up to 45 mol if not 50 mol. But I'm gonna keep it at 40, maybe a little higher. It all depends on what she wants. I can definitely increase the intensity. Just don't want to risk light stress. On a better note, I have tons of space for this plant to grow. Like a good 3 ft. of space. So she can grow a good 4 ft tall and still not take over the tent. Well, no true. If she ends up being that big she will most certainly take over the tent. Let's hope the Blue Dream can hold her own. Anyway, I don't really expect a 4 ft plant. I'll be happy with 3 ft. As long as it has colas for days, I'm happy. Plus, height doesn't really matter in tents. It's width that matters. How many tops can one make in a limited space. Spread the plant out keeping a low profile. That way all the buds get light and not a select few that would otherwise be over the canopy. For example, this plant is going to be tall with a lower canopy and one main cola. I didn't really want this structure, but I don't have any tie downs. And the top won't grow a long enough node that's thin enough to bend. So I can't even use the bud clips. And now the side branches are building a lot of nodes and none are spaced out enough to use a bud clip on. Well, it doesn't really matter anyway. All the side and auxiliary branches are growing outward and not up, Soni don't need to train those down. Honestly, this would have been the perfect opportunity to learn how to top. But that bus went by a long time ago. 02/12/2026 So I topped her off today. Current dose. What's weird is that the water is still lower than when I did the new mix. It's only been 2 days. I'm wondering if I should be adding more to the mix to bring it back up to 450 ppm. The pH is fine now. It was a little high, but now it's back down to 6.2. The EC and TDS are way low. Like 800 cm and 396 ppm. I'm pretty sure I want to be around 900 cm and 450 to 500 ppm. Not too sure though. She seems to be a light feeder. Not complaining. Less nutrients to use. So now I'm wondering if I need to add more to the mix. Like 5 ml more of bloom and 2.5 of everything else except for Silica Blast and Hydrogaurd. Those are already at the normal dose. Maybe I just need more cal/mag? I'm not sure. I also wonder why the mix I'm using now is lighter than what I used before. It was 450. Should t it be the same 450 that it was before? Very confused. 02/13/2026 Friday the 13th! What a fun day. She got big. Explosive growth. It seems she hasn't started to stretch up yet. But she's definitely getting wide. I want her tall though. She should get taller soon. I don't mind a short plant, but she doesn't have enough nodes for my liking. Not enough bud sites. If she had like super short internodal spacing, I wouldn't be too worried, but she doesn't. Lol. Long spacing. So she definitely has some growing to go. No top off needed today. I did swap out the ice bottles. It wasn't that warm either, so I think I'm keeping the temp down all together. Technically, the water temp shouldn't be a problem at night and in the morning. But I can understand the heat turning on full blast during lights on. Now if I were a waking man, I'd be awake at 6 am to swap the bottles out. But I'm not. I sleep to like 8:30. Lol. The environment is looking pretty good. No complaints here. This is the last week of veg I think. Maybe not? I don't know where to place the pre flower stretch. Considering the name is Pre-flower, I'd say it's not flower, but it's not really veg. Well shit. I'll figure it out. Readings: pH: 5.8 EC: 700 TDS: 349 Temp: 66.7°

beautiful plants. I'll be buying more seeds for sure.

(wednesday, start week 8) plants both start flowering, the water in the Dwc has only 400 ppm. this plant drinks a lot instead of feeding later on this week: changed water to 650ppm (friday) soil plant looks like its over or underwatered. i used 1/3 perlite and water once a week 1 liter. the pot weighs normal.. maybe i should keep watering everyday half a liter ? the video and pictures of these problems are added to this week, my PH meter was broke causing me to give the wrong Ph for a while.. i now use the liquid ph test kit from GHE, she starts to look better now. ill be happy to finish this i dont like all the leaves on this strain

So I chopped one girl on Monday and will be chopping the other girl today, will be back when they are both dried with weight and my recap on my first grow ?

Anesia blackberry moonrock and imperium X will be put in the 100X100X180 with the TS-1000 so they can veg some more the black berry moonrock is looking very short stocky and bushy lest how she developed try the week Happy growings visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD 27/10/21 Transplant the black berry moonrock in 11L fabric pots added 5gram Easy Roots - Mycorrhiza Mix to soil Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

กลิ่นดีมากๆเลย ชนไฟด้วย

Starting 5th week of flower today Light feeding

Great overall harvest from such a small light

Unfortunately, I had to find out that my account is being used for fake social media sites. I am only active on growdiaries here. I'm not on Facebook Instagram Twitter etc. All accounts except this one are fake. Have fun with the update. Hey everyone 😀. The plant develops as it should 😍. It grows very well and very beautifully. She also coped with the topping very well, so I will top it a few more times before it finally goes to the flower tent 😃. Until then, I wish eucb a lot of fun until the next update. Stay healthy and let it grow 🙏🏻 You can buy this Strain at : https://www.exoticseed.eu/ Type: Herz Og ☝️🏼 Genetics: Larry OG X Kosher Kush Indica 60 % / Sativa 40 % 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .