Feeding nutes based on chart, water in (sameday) ..... clean compost brewer and brew new batch (sameday) ..... use compost tea once wk (nextday, water in lil) and discard and clean for next week.... defoliation a lil daily..... HENCE ... becoming more of a chore or should I say we have a great relationship right now. A coexistence, a sudden need for one another. They are my sheep and I am there shephard! Now lets harvest some cotton!

Soaked the seeds in distilled water for 15 minutes. After I put them on wet cotton pads and sealed those in Mylar bags. I placed those bags on top of my radiator. I made sure it is not running too hot. I don't really care about yield; I just want to do a little project inspired by a YouTuber called Weed in a Pot. I just want to see if I can bring it to the next level with this setup. I already switched out the light for the newer evo dimmable version since it was to strong. Also drilled a few more thicker holes in the bottom for better cold air intake.

harvested on day 66. trichomes been turning amber for last couple of weeks. but she is amazing. bud structure is top notch and the smell is unreal. this was my first organic grow and only second ever. the difference in my grows are night and day and i will be staying organic for sure. i cant recommened it enough. will update weights etc when its all dried hopefully on the weekend coming

Alrighty, Guys I'm coming to some new realizations lol. Plants are doing way better with new root growth coming from the net pot sides horizontally. I was confused because it seems that a bit of the roots had died or rotted for no real reason. I have suspected the amino treatment and root accelerator was gunking them up. Needless to say, I am almost out and decided to exclude those additives and see what happens. I also ran out of Multi zen and decided to up the base nutrients to compensate. It would be great to get opinions on it all, The prices are so steep and honestly, I practically had the whole line up and it didn't really impress at all. Strangely I have some dc buckets in the center and they are doing really well on just micro, bloom, and cal-mag so save me from making some baizes haha. I noticed that the growth is a bit spread out but they are all from seed so I guess that expected. the bushiest of plants has some discoloration on the leaves but it seems to be killing it so I'm not too worried. At this point, I'd love to get any harsh criticism or to narrow down where I am making these mistakes. I came in expecting to flip from veg in 4 weeks but that doesn't seem possible from seed. I know a lot can be a strain but I still feel like even though I have all these controls I'm missing something. Oh everyone got topped for the first time and aside from some interesting patterns its all gravy baby. Let me know if I need to do something about that missing 400 ml of multizen haha.

Semana 15 abril - 21 abril 16 abril feeding day (1.5l) 20 abril feeding day

Easy harvest Kissy 242 grams dry Honey harvested will document her digits but not include her in the final count, she is just too stunted but damn glad for her.

Super busy with a move and a big garden reno. Sorry, this is the only update for this week

06/17/2020 I'am not sure how she will produce,but the smell is intoxicating! Wow that's all I can say. Better than any gg I've smelled thank you Fast Buds! In fact I love it so much I have decided to selectively pollinate some buds with Red Sky male , that should make for some freaky flavor combos! I think she is stretching and filling out she looks happy! I do have powdery mildew on the stem need to clean it up oh yeah did I tell you I love the smell! Lol

The little plant is growing without much addition.... I germinated a Gorilla Glue 4 seed in a glass of water at 21 degrees celcius for 24 hours then put it in a pot. It will keep its cousin company. If all goes well I intend at the end of the Gorilla Glue Auto harvest to change the light schedule to 12h 12h so that Gorilla Glue 4 will be in bloom. Will I have problems with the light?! We will see!

Added a bit more Foliage-Pro to the mix as the LSDs have been a bit yellow, normal flowering? Buds are filling out, not as strong smelling as expected but I can tell they are in the house.

They are still growing nicely, continuing to bush out since LST. A healthy green & what will be a bunch of future bud sites keep showing up daily.

Tras un pequeño fallo con la iluminación (5 horas apagado cuando tenía que estar encendido ). He decidido hacer ya el cambio a floración,espero que no sea muy tempranero y se queden muy pekeñas las niñas . Mañana mismo empezaremos con los fertilizantes de floración controlando el pH en 6.5. Todavía no he defoliado nada y nose si quitaré alguna hoja o solo las intentaré apartar sin que moleste a las llemas .veremos cómo prosigue la cosa 💚 Adjunto un vídeo con el tutorado y la poda de bajos realizada .. Gracias growers!💚

**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8

Coming on well. Turing into monsters... I need a bigger light. Day 45 got second dose of bio pk 5-8. I have a bad feeling i will have to do 3 separate harvest days hahaha

Beginning of the week, Jan20 D29 Continued LST, made an very light defoliation. Last week I've added 1tbsp of soil adifier per plants (sulfur) my PH should reduce enough to be between 6 and 6.8 Jan21 D30: re raised the light @175w, plants are happy Jan24 D33: plants are booming rapidly, topped the 2 C&C on all the main branches Jan27 D37: starting to see a little deficiency. Maybe a lockout of calcium or potassium. Tested soil ph and its around 7. Work to do. Did a slight defoliation, add 1tsbp of mineral mix 0-1-5 per plant (calmag) 1/4 cup of mykes, 1tbsp of Batguano 0-12-8 and 1tbsp of soil acidifier. Top dressed all 3 with that and watered 2L at ph 5.5... Hope I did not do too much. Will wait nx weekend to put into flower.

Le foto parlano da sole, continuano a crescere, mancheranno altre 2 settimane al raccolto... giorno piu giorno meno...

L'attesa si fa sempre più lunga,🤣più si avvicina il giorno del taglio netto e più sembra non passare... .. questi profumi mi fanno venire l'acquolina in bocca 😜🤤🤤🤪🤣😂 beh dai ancora poco e la gustero per bene😂👍🙏