Amazing plant to grow. By far my favorite out of the sweet seeds f1 fast line. Flower looks feels and smells like indoor. Couldn’t be happier and couldn’t recommend this enough especially to anyone growing with shorter flowering seasons.

Gorilla Glue Auto day 69 - 4.3.2023 This week it stopped growing and is getting fatter, the smell is more active when I open the tent, it took more water than last week and I added PK 13/14 I also removed some leaves for better light penetration but I didn't undress it because it's cold :) 0,2 Bio-Grow 0,4 Top Max 0,4 Bio-Bloom 0,8 Calmag 2,0 PK 13 /14 Plagron 1.5 gr Pandora Powder MYCOTERRA Gorilla Glue Photo I made LST Regards and see you next week

After Input from the Community I've Decided on NO Nutrients for a few Days to let Her Recover from Her Suspected Nitrogen Toxicity. If She Recovers like I Hope She'll get One more Feeding of Beastie Bloomz only before a Final Flush as I Suspect only a Few Weeks before She's ready to Harvest.

Today is the day my big bud seeds come out of the soil, they have all started to take root in 25 liters of soil without any problems

Week 7 begins for LSD. She's bulking up, packing lots of frost and she's got a killer sweat berry citrus smell. Switched out big bud coco for overdrive. Thanks for stopping by, tune in next week for another episode 👽🌳🔥

Snapped the main branch a little but its been healing ok. Besides that shes been getting bigger filling out her new pot. Also took the smaller lowest branch for my first clone attempt. Probably gonna experiment with a couple more cuttings maybe even an auto clone for laughs. Been raising the light an inch at a time as i noticed signs of light stress. All in all good week happy growing friends

Flwr

Everything is perfect with moderate temperature and humidity. I feel my tree is growing at full speed. When I changed the foundation I watered a little and decided to end this week here and wait for the next watering. I will be planting the remaining plants in the greenhouse so the only difference is the light. I was really curious about the results, as I use 2gal pots for outdoor plants and 1gal pots for indoor plants.

9/22 topped them at 4th node. some of them are looking better for mainlining that others. some of them i may not mainline and others i left an extra node in case i want to keep clones around. #1 is looking happy with the topping and looks really good. #2 is the only one thats been praying and is the tallest and strongest looking all around. #5 short and such tight internodal spacing that it makes it hard to see whats all there. just looks like a bunch of small leaves until they grow out. i may not mainline this one either be cause of it being so tightly packed it may make it 9/27/24 day 20 theyre growing quite well. #1 i ended up taking the bottom nodes. i was originally goi g to use them as clones later on but decided to just let her go with her 4 nodes. #5 is so tightly packed, she has like 8 mains all in such a small space, its hard to even make sense of it all.

I'm back! Almost gave up on these ladies but the genetics from Speedrun Seeds pulled through. They just patiently waited until I got the root issues figured out then proceeded to blow up. Floraflex Rootdrip saved roots without a doubt. I'll never run DWC without it again. Today was day 110. No idea what to expect for a dry weight just glad to be at my first harvest!

wait for him to mature his buds ... just that

İ dont know why but 1 of 3 is growing amazing. 2 of 3 are weak and like bonzai plants which i realy donr like. All plants germinated the same day and say day put it soil. Looks like the quality of the seeds was not so good... my first try of theese Brand... not so god so far

Today marks two weeks since germination and also the start of my journey with APTUS and their premium line program. 😎 First time working with these products so I´m gonna take it slow... mixing Regulator & Startbooster with PH at 6 and temp at 20ºC. 😉 Lowered the lights by 10 cms and the average for the week was 23,5ªC (temp) and 70% (hum). 😊 The supplies have arrived and the upgrades already installed... 2x 200mm duct vents for the side walls air entrance and swapped the 150 combi ducting for a 125 PhonicTrap acoustic ducting, that was just laying around here from a previous giveaway and wanted to test it out. Required a plastic reducer and some duct tape but the job was done 😅 As bonus a little trick I developed about placing sticky cards outside the tent near the side vent as first barrier and a little video with all the ladies together 😍 Really stoked with this one! 😋

Just took some clones from this beauty and we have about 4 weeks until i begin flower.Will increase nutrient dosage a little bit as i feel i could push them a bit more.. My feeding schedule is interchanged daily between nutrients and regular ph'd water as it is very hot and these pots dry out daily. The tap water in my area is about 250 ppms so i am working with that until i get an RO filter.. This is still my first grow so im taking it one step at a time.. all advice is welcomed and would be greatly appreciated .

DAY36🌻BIG BLOCK Bred by Cannabis Brothers California Lineage Blockberry x Motorbreath 15 (Legend OG) Tap water feeding (Premium program) Aptus Light (BS600) + UVA/UVB 3hrs daily @future_of_grow Soil (lightmix) & pH Plagron Tent size 4x4 (120x120) Pot size 6L (1.6 gal) Media sponsor Skunk Magazine 5th week of 12/12 ended for my Big Block by Cannabis Brothers California. As you can see, I don't do heavy defoliation on my plants as I think it's not natural to shock them like that. I don't give a flying f@ck about yield. My philosophy is turned towards good flavors before all and I like to follow plants development in more natural way when comes to defoliation. I believe that plant will always adapt and focus on where energy comes from, and in indoor grows we all know that bottoms will get bleachy as we enter late flowering. On the other side, nobody wants mids and small buds, so yes, of course I remove bottoms, but only first few nodes and not in a way of lollipopping or something like that. I'm just trying to be in balance with natural process of plant development at all times. I'm not saying defoliation is wrong, but since I never grow the same cultivar twice, it's way safer to observe their natural behaviour, instead of forcing techniquies other growers are claiming to be "the best". With that being said, my plants are exploding from happiness, as you can see. I got two of more indica leaning phenotypes and two taller - more sativa alike specimens. But all have a distinctive OG structure and smell is getting super intense. It smells diesel and chem like no run before. It's the reason why I'm growing it in the first place. And what better way to try out the true OG than from the original creators of White Fire OG. Yes. If you didn't know Terence and Philip, in collab with Rascal, the real OG's, also known as Payaso and Cannabis Gardener, are behind the legendary OG cross and all the rest are just white labeling this famous cross. Know your genetics, brothers and sisters. There are too many copycats out there, so try to show respect to the origins. Noone can make a patent on a certain cultivar, but we as consumers, need to know who are we going to support in the future. Breeding is art and I like to pay respect to those who actually do the work of breeding. Just look at the Blue Dream for instance. Do we actually know who stands behind this cross and who has the original tissue of this genetics? Ask Google a little bit, dig in, and you'll be shocked. Show respect to those who truly deserve one. Peace in and out!

Super Strain, 105 Tage vom Samen bis zur Ernte, endhöhe 58cm

Very good journey to me, she has responded very well to the lst training, providing me beautiful colas, enough for me to have nice clean organic nuggets to smoke. I would definitely would run this Ak420 by seedstockers again, the sweetest phenotype was the number #2 which you can take a look at here in my page!

ONLY 3 PLANTS LEFT IN THE 8X8. LESS THAN A WEEK EVERYTHING WILL BE DONE 🤞 ALL THE PHOTOPERIODS ARE IN THE 8X8 NOW. THE STRIVE NUTRIENTS IS INSANE.. BEST FERTILIZER PRODUCTS EVER MADE. I USED IT 4 TIMES IN 13 DAYS AT FULL STRENGTH AND THERE IS NO NUTRIENT BURN AT ALL AND THEY EXPLODED. AND I HAD A FEW THAT WERE TURNING YELLOW, I THOUGHT IT WAS ROOTBOUND OR CALMAG DEFICIENCY BUT THE STRIVE NUTRIENTS BROUGHT THEM BACK AND THEY ARE SUPER HEALTHY AGAIN.... ATTENTION GROWERS:::::: YOU MUST TRY STRIVE NUTRIENTS. BY FAR THE BEST FERTILIZER PRODUCTS EVER.. I PROMISE YOU THAT AND IF YOU USE IT YOU WILL NEVER USE ANYTHING ELSE FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA (NEW) STRIVE NUTRIENTS 💪 Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍