5/27 curious to see where this week ends up at 5/29 the one plant indoors is packing on weight. The one I put outside to finish (possibly stupid) seems to be maturing faster but bulking slower. She's seemed healthy this whole time. Not even a burnt leaf tip 5/31 attempting to take pictures in different lighting to get a better idea for yall viewers

Did first nutrient feeding w fox farms nutes. Very little. Things were going perfect then I woke up this am to slight curling again. I changed light distance and put in my other light as well so I’m now in need of ac unit or another fan bc it’s getting hotter, 85. Or I figure I could run my exhaust fan 24/7 and take it off my humidity switch but then I got to possibly get another humidifier bc the exhaust fan takes the humidity out of the room. Idk but the girls all in all are looking good to me. started lst on 6/30 using grow big and big bloom now

Back from a short trip and they’re looking great! Looking ahead to my schedule, it became apparent I was going to need to harvest sooner rather than later if I wanted to be at my house for the first week or drying. Trichs were about 50% milky and maybe 5% amber on average. I decided I’d be staging th harvest over a few days. I was going to try washing them prior to drying to make sure the pm is neutralized and because two of the outdoor ones are probably covered in city soot 🙃.

Hey everyone 😃 The time has come , On flowering day 64 the harvest was carried out 😍. After spending two days in the darkroom at 62% humidity, they were now harvested cleanly by hand 😃. After harvesting, they were laid out on the net as usual, where they can now slowly dry again for about 7-10 days at 62%. Then they come with 62% in jars for 2-4 weeks, and then the 58% boveda packs are put in 👍. Of course, I will come to the phenotypes themselves in detail in the last update. Until then, I wish you all the best, stay healthy 🙏🏻 and let it grow 🍀👋 You can buy this Strain at : https://sweetseeds.es/de/red-mandarine-f1-fast-version/ Type: Red Mandarine F1 Fast Version ☝️🏼 Genetics: Red Poison Auto®️ (SWS39) X Tangie (California Orange x Hybrid Skunk) 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Week 6 of flower

Same as my last run just amazing no problems very hard dense buds frosty to hell I am very happy with this sugar cane and she will be growing with me forever thanks

No joke she is FAST! Once she got her roots in and I was able to not over water the seedlings this time, growth just blasted off! Just a little water here and there

I’m happy with my canopy. I’m trying my best to sit and watch. Slow season with 1 3x3 waiting for dry back/ feed

It's been a beautiful strain to work with, the flowrs are definitely worth it after all this time, the quality is definitely high. However this pheno of ak420 smells very different from the other 2 phenos I've grown along with her. The flowrs are beautiful, very solid and frosty nuggets, I smoked a few little nuggets when trimming but I'm excited to taste the big buds, hope you guys enjoyed the process. I want to say that this pheno #1 has a different smell compared to the other 2 phenotypes of ak420 that you can see here on my page as well, so stay tuned guys! Overall result is very nice, good quality, strong weed, sticky, stinky. I can say that it's very great and also you can get them for a very cheap price so it's a very good investment if you're looking for a powerful and affordable strain. Cheers growmies! ❤️💚💛💎👨‍🌾

As of day 14, the Blackberry Kush is still exhibiting it's abnormal leaf growth. I've only ever seen this on another genetically purple strain, so I am curious if there is a connection. If anyone has seen similar issues in their own plants let me know! It's growth hasn't been too bad, and I am sure it's going to continue to take off over the next week! I usually top my plants between day 14 and 21, so i am hoping it is growing vigorously enough to prevent any stunting. I haven't seen any adverse effects from temporarily switching to my plentiful dry cal-mag, so I am happy about that so far! I am still adding a similar EC worth of Cal mag (.5) so it's good to have dialed in a rough equivalent. I hope everyone is staying safe, and happy growing! 👍🌱 Day 15: the leaf growth continues to be very screwy, and even if it's at least partially a genetic issue I continue to triple check all my practices and parameters. The PH drifts up mildly in my reservoirs between cleaning/remixing of nutrients, but it is going from roughly a 5.8 up to a 6.2 (at worst) with no change in the EC/PPM. Between the lack of EC drift and lack of smell, I don't think there are any major bacterial issues. The outflow PH is also acceptable (5.8) and the outflow EC is around .2-.3 above inflow, which is also acceptable. I dug into the coco a little bit, and the medium is not oversaturated with water (it is always a bit "fluffy" with good drainage and never compacted) and the roots are white and healthy. With the healthy vigorous growth of the other Blackberry in the same conditions, it brings me back to this being at least partially a genetic issue. I looked through grow questions of other diaries for similar leaf issues, and it seemed that most were either blueberry or blackberry strains from a range of breeders. This could be purely a coincidence, but it does make me wonder. The grows with similar issues seemed to otherwise have no commonalities in how they were grown. I am going to keep trying my best with this plant regardless, so I hope it pulls through alright! Day 17: being very careful with my PH and keeping it a bit lower, to rule it out as a possible cause of the twisted leaves and less vigorous growth. I am keeping it between 5.5 and 6 for the time being to make sure there is no lock out of micro elements like boron. As per the comments, I am being more accurate be using a pH pen as opposed to drops which I may have misjudges. I topped the plant, which is definitely a risk! But I am hoping for some healthier leaves to come in, and the plant hasn't stunted so far! It has grown the number of nodes it should have for its age, it just not as filled in and lush as I would like it to be. Day 19: I have been monitoring PH especially carefully, taking a few measurements per day and keeping it between 5.6 and 5.8 (a little on the low side). The runoff is consistently under 6 as well. EC and other conditions have stayed where they should be as well. I reduced any PH drift by running the air pump for the res 24/7, instead of just for mixing and before fertigations to rule that out. But I haven't seen any overall improvements for the leaves so I am reverting back to my theory of a genetic issue with this particular plant. It's growing larger and it's stems are thickening, so I'm just going to keep it growing as well as I possibly can and see what it yields!

Skywalker Haze has officially entered the first week of flowering after 9 weeks of well-balanced vegetative growth, supported by continuous LST, selective pruning and meticulous management of the SCROG net. The plant presents a balanced structure between apical and lateral, tight nodes, and a compact but airy leaf development. 📊 Current environmental data: Light: Phlizon FD9600 1000W set to 100% Photoperiod: 12/12 (10:00–22:00 hours) Average VPD: 1.1 kPa Humidity: 58% Day/Night Temp: 27° / 22°C 💧 Weekly nutrient solution (50 L total): pH Perfect Grow/Micro/Bloom: 4 ml/L each Sensizym: 2 ml/L Bud Candy: 2 ml/L B-52: 2 ml/L Cal-Mag AN: 2 ml/L Rhino Skin: 2 ml/L Final EC: 1.4 mS/cm pH automatically stabilized around 6.3 thanks to the AN system Irrigation via MarsHydro dripkit (24W – 900 L/h) on electronic timer: 2 cycles/day of 4 minutes each, managed with continuous aeration of the tank. 🧠 Observations: The plant has started stretching with a constant but controlled rhythm. The upper leaves are vigorous, without signs of excess nitrogen. Internodes well spaced. The response to the change of photoperiod is excellent. 🔧 Objective: maintain harmonious vertical development, stimulate early formation of calyxes and continue with floral stimulators starting from day 10.

Sin problemas. Siguen muy fuertes, ya no tengo espacio en altura, llegan a 5cms del foco. Esta semana introduzco un booster orgánico y un potenciador de flora de aptus. Todo orgánico. Siguen engordando sin problemas, una presenta algunas hojas amarillas, parece insuficiencia de nitrógeno, pero lo veo normal en el momento que estan.

👹 Monster Marker – Sweet Seeds Absolutely crazy strain! 😎🔥 The terpenes are super berry-like and sweet 🍇 – smells amazing already. The bud structure is starting to show some foxtailing, with very short internodal spacing 🌿💪. I’m really curious to see if the colas will grow completely together by the end of flowering 👀✨ Follow me here and on Instagram: @DendeGrow to stay updated – I share more grow tips, tricks, and behind-the-scenes content over there 🌱📸 --- 👹 Monster Marker – Sweet Seeds Absolut krank, diese Sorte! 😎🔥 Die Terpene sind super beerig und lecker 🍇 – der Geruch ist jetzt schon der Hammer. Die Budstruktur zeigt bereits Foxtailing, mit sehr kurzen Internodien-Abständen 🌿💪. Ich bin gespannt, ob sich die Colas am Ende komplett miteinander verbinden 👀✨ Folgt mir hier und auf Instagram: @DendeGrow, um nichts zu verpassen – dort gibt’s noch mehr Tipps, Tricks und Einblicke rund ums Growen 🌱📸

Simply put I am so very pleased with the way this plant has performed my only worry is how to properly dry and cure this magnificent specimen

this is a strawberry gorilla by 420 fast buds, about to be harves

2024-05-25 The Fatso GO Plants had a good stretch again, and i can see tiny Flowerbuds thats good, so they are officially into Floweringmode. Weather is cold and rainy again, so they will stay indoors for longer. Fatso GMO F1 Auto, a feminized hybrid strain, emerges from the crossbreeding of two autoflowering varieties: Fatso Auto and Cotton Candy Auto. This California-derived cultivar leans slightly towards sativa, offering growers a straightforward cultivation experience coupled with impressive yields, robust THC levels, and a delightful palate featuring sweet, candy, and fuel undertones. Thriving both indoors and outdoors, Fatso GMO F1 Auto exhibits above-average resistance to mold, while still benefiting from adequate ventilation, particularly in environments with higher humidity levels. Its exceptional resistance to pests and pathogens ensures hassle-free cultivation. While indoor plants maintain a compact stature of around 100cm or less, outdoor specimens can stretch a bit taller, reaching heights of up to 130cm when grown in open ground. Completing its entire lifecycle within a maximum of 75 days from germination to harvest, Fatso GMO F1 Auto delivers yields considered average yet impressive for an autoflowering strain. The combination of high resin production and elevated terpene levels renders it an excellent choice for cannabis extract production. Its terpene profile presents a sweet and funky aroma with savory hints of Skunk complemented by pine and floral notes. On the palate, it delights with flavors reminiscent of sweet candy underscored by subtle fuel undertones. With THC levels reaching a high of 24% and minimal CBD content, Fatso GMO F1 Auto delivers a balanced and uplifting effect, appealing to enthusiasts seeking a satisfying and harmonious experience.