The Grow Awards 2026 🏆
Likes
Comments
Share
@McShorty
Follow
They grew a lot this week or so it seems to me, because i was on vacation and havent seen them the last 5 days. SQ#1 and Blue cheese are now my biggest plants Even though i germinated 1 week later and also from the other strain there was one plant that was always bigger than the Rest and now its the second smallest. So far everything was nice, no issues with nutrients, desease or bugs, every plant develops hairs and is female. I think i give them 1 more week to grow and then i‘m changing the light cycle and start the flowering Phase, really excited for that :)
Likes
13
Share
Week 5 day 1. I have a favourite for next run. I’m very happy, I haven’t really defoliated at all this grow, just letting it grow. Wish I was going for mains(topping) but still very good. Going to wait around week 9 so seeds will be good for next run. I have decided to do very hard hst next round to show max potential. Very happy with supercropping so will do it very heavy with scrog. I will try to reveg the one I really like but it is difficult having only 1 set of lights and 1 tent. Plants are about 7ft tall, might just run 2 next round in 4x8 or will still continue to go 4 in the 4x8.
Likes
3
Share
Likes
105
Share
@Coopmc
Follow
Great after the mold issue during clone. Recovered good and nice yeild 4.4 Oz tops and mids 3.8 g of rosin and a few Oz of trim to process but man is this stuff good
Processing
Likes
14
Share
These girls was veg indoor for 5 weeks and kicked outdoor July 26th, its almost harvest time these clones was strong all the way through the grow process from @Cloneville Gotti OG.
Likes
16
Share
@Dunk_Junk
Follow
She grew 17cm this week. Over doubled her height. Lets see what she does in the next couple of weeks. I note she got a LOT bushier. Also her leaves are VERY broad and indica like for such a sativa strain! 😶
Likes
62
Share
@Reyden
Follow
La Spider Farmer SF2000 continua a tenere a far crescere le ragazze con un ottima luce e spero di riuscire a vedere qualche colorazione tra non molto…la maggior parte dei problemi nella coltivazione della Cannabis deriva da un terreno poco drenante e da troppa 🚿 acqua quando le diamo da bere…bisogna sempre ricordarsi di alzare i vasi e vedere quanto pesano e se c’è bisogno, smuovere la terra un po’ con le mani attorno alla pianta
Likes
19
Share
Привет садоводы началась 2 неделя цветения растение не сильно вытянулось вверх и стало густым я заменил HPS на LED TS 600 m-hydro температура понизилась на пару градусов а так все нормально , листья выглядят хорошо поливал последний раз простой водой
Likes
5
Share
Overall I enjoyed this grow and learned a lot about living soil. Going for a slow dry, trim, then at least a one month cure. Hopefully another six days and I’ll update with a dry yield. My next batch is already cooking but with 5 gallon pots. 03/25 - Day 7 Drying B & C are done drying and have been in jars for a day now with RH ~60%. Total 3oz from B & C. Total 1.5oz from A & D
Likes
33
Share
@burnerac
Follow
Timelapse Days 21-34: Memory card filled up and I lost days 35 and part of 36. Day 36: No photograph. No longer centered under the light. I need more lighting. Day 37: plant taking to the training well. Almost time for another tent peg. Day 38: Still growing. Day 39: Worried this is mold. Added a gallon of water with nutrients increasing the nutrients to mid-vegetation. Overall I think the plant looks pretty healthy. Day 40: Turned the carbon filter on to promote air exchange. Day 41: Continued training. Day 41: Rushing the exhaust fan has reduced the humidity. Going to have to keep an eye on that.
Likes
65
Share
@Dendegrow
Follow
Week 4 update! 🌱 Week 3 is done, and the ladies are now three weeks into their flowering phase. So far, everything has gone really well. However, one bud and the plants in the front showed slight signs of potassium overfertilization, which likely caused a calcium uptake issue and led to minor necrosis. No worries, though – today I completely flushed the entire system and replaced it with a fresh solution. With this reset, everything should be back on track 💪💧. On top of that, I decided to bring out an old Cree& Osram LED lamp as a booster. This will provide the two smaller front plants with more light intensity so they can metabolize the higher nutrient levels more effectively 💡🌿. Everything is looking great so far! Stay tuned, follow along, and let’s see how this journey continues 🌺📸. Woche 4-Update! 🌱 Woche 3 ist geschafft, und die Ladies sind jetzt drei Wochen in der Blütephase. Bis jetzt lief alles super. Eine Bud und die Pflanzen vorne zeigten jedoch leichte Anzeichen von Kalium-Überdüngung, was wahrscheinlich zu einer Kalzium-Aufnahmehemmung geführt und leichte Nekrosen verursacht hat. Kein Grund zur Sorge – heute habe ich das komplette System gründlich durchgespült und die Lösung durch eine frische ersetzt. Mit diesem Reset sollte jetzt wieder alles reibungslos laufen 💪💧. Außerdem habe ich beschlossen, eine alte Cree& Osram LED-Lampe als Booster herauszuholen. Damit bekommen die beiden kleineren Pflanzen vorne eine stärkere Lichtintensität, damit sie die höheren Nährstoffwerte besser verstoffwechseln können 💡🌿. Es sieht alles richtig gut aus! Bleibt dran, folgt mir, und lasst uns schauen, wie sich die Reise weiterentwickelt 🌺📸.
Likes
18
Share
@valiotoro
Follow
Hello everyone 😎 Day 30 she grew fast with a great structure and with a beautiful green colour on the leaves. Homemade bloom power for nice buds Have a great day 👨‍🌾🏻
Processing
Likes
17
Share
Thanks for all of your replies to my questions. I will be slowly upping the bloombastic 0.1ml every other feed until we get to 1ml. 3rd July. I done a light defoliate around the base of the plant, a few small bud sites removed that were tiny and 6/7 leaves that were dieing from the bottom to free up space around the soil. Day 44, lowered nutrition to nearly half.
Likes
10
Share
@Papabro2k
Follow
This one started great in the rqs boost all the way threw her cycle of growing was always impressive o her sis too much training on her but when I did they was no problem at all this one is a keeper and will be doing more in the future thanks 🙏
Likes
14
Share
@Teak76
Follow
Bis auf das Problem das es in unserer Region Arsch Kalt ist und ich im Grow Temperatur Probleme habe läuft es gut. Die Ladys haben eine gesunde Farbe und sie sind in der Vorblüte. Leider musste ich eine Gorilla Glue entsorgen, die andere Erholt sich gerade. Bin mal gespannt was aus ihr wird. Da ich noch sehr Unerfahren bin und ich bei meinen ersten Grow durch ein Zwitter alles zerstört habe bin ich mir nicht sicher ob auch jetzt einer dabei ist. Habe ein Bild hochgeladen. Vielleicht kann mir ja jemand sagen ob ich mir Sorgen machen muss. Bis jetzt läuft es Überraschend gut. Beobachte Die Lady weiter und hoffe das es kein Zwitter ist. Glaube aber nicht. Den anderen Damen geht es super.
Likes
38
Share
@Snakeking
Follow
Guys i swear it’s like my girls are awakened after a few changes and i love to share with who interested about it. One of them is put something under your fabric pots in outdoor growing to keep your bottom of your pot a little bit wet and don’t worry about water sitting in there because there will be no water after just a few hours. There are 2 other things and i will answer to who ask only! Believe me you want to know about this
Processing
Likes
5
Share
She looks perfectly healthy and ready to get big! Haha so excited about this beautiful strain,I hope you all enjoy my diaries I'm growing 4 plants of this genetic,and 2 more automatics from this wonderful Spanish seedbank,let's see what we can do! 💚 🌱
Likes
110
Share
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!guckt euch letzen Report an !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Blüte hat begonnen: Edit:11.05 Die Pflanzen sind innerhalb von 2 Tagen explodiert. Ich habe das Licht nun auf 75 Prozent gestellt und noch einmal Cal-Mag nachgegeben, da die letzte Gabe nur eine halbe war. Die beiden Titan sehen fast identisch aus. Die beiden Epsilon sind circa 3 Tage unterschiedlich, eine ist etwa 5 cm kleiner als die andere und hat noch kaum Blüten. Ich denke, in 3 Tagen wird das der Fall sein. Die Cosmos F1 ist im Umfang circa 50-50 cm, kaum Blüten bisher. Ich hoffe, sie wird nicht noch viel größer, da der Platz langsam eng wird. Ich bin von dem Wachstum dieser Pflanze absolut begeistert. Mal gucken, was die Blüte bringt. Edit ende Ich habe alle Blüten entfernt, die nicht im direkten Licht sind, und alle Blätter, die die Blüten bedecken. Die Pflanzen weisen einen Cal-Mag-Mangel auf, was bei der Blüte normal ist, gerade bei diesem Licht. Ich habe dem Gießwasser etwas Cal-Mag hinzugefügt. Die Pflanzen sind drei Tage älter als im letzten Report. letzte Woche : Die Pflanzen sind seit der Keimung auf diesen Fotos genau 30 Tage alt. Ich habe eine Pflanze ausgetauscht, da es sich um eine Epsilon F1 handelte, die vermutlich Mutationen aufwies. Sie hatte verkümmerte Blätter, die nicht wie die ihrer Artgenossen aussahen, und wuchs deutlich langsamer. Daher habe ich sie nach 2,5 Wochen ausgetauscht. Der kleine Mann(die ausgetauschte Pflanze) leidet natürlich jetzt ein bisschen unter Lichtstress, deswegen werde ich wohl nur eine sehr gestauchte Pflanze erhalten. Aber besser, als die Fläche leer zu lassen. So viel zu dem, was nicht funktioniert hat: Die Sanlight stand die ersten 2 Wochen auf 20 Prozent. Dann habe ich sie teilweise mit dem Dimmer höher gestellt: 2 Stunden auf 25 Prozent. Eine Woche später bin ich auf 30 Prozent und 2 Stunden mit 35 Prozent gegangen. Für Woche 4 habe ich 40 Prozent und 2 Stunden auf 45 Prozent gewählt. Ich erhoffe mir, die Pflanzen so schneller an die starken Lampen zu gewöhnen. Im Nächsten grow soll bei jeder Pflanze die TDS per Infrarot gemessen werden. Da werde ich dann ein Experiment zu machen, wie die Lichtsteigerung am besten umzusetzen ist. Zu den Lampen kann ich bis jetzt nur Positives sagen. Im Gegensatz zur dazugehörigen App, diese ist wirklich nicht sehr gut umgesetzt. Das Menü und die Einstellungen sind teilweise irreführend und nicht sehr durchdacht. Ich muss mir immer wieder die Tutorials in der App ansehen, da diese immer wieder angezeigt werden. Noch dazu hätte ich gerne die Möglichkeit, mehr Einstellungen treffen zu können. Das ist aber Meckern auf hohem Niveau, weil auch die App das macht, was sie soll, nur eben meiner Meinung nach nicht sehr gut umgesetzt. Die Pflanzen wurden von mir mit Klipsen aus dem 3D-Drucker gestützt. Diese Klips kann man Stück für Stück im Winkel verstellen, so dass man die Triebe damit neigen kann. Das habe ich von Tag zu Tag im Winkel verstellt, so dass ich am Ende einen 45-Grad-Winkel habe. Das habe ich insgesamt über 6 Tage gemacht. Die Pflanzen haben an sich ein sehr gleichmäßiges Wachstum. Die Cosmos F1 wächst so optimal, dass kein LST mit den Klipsen nötig ist. Ich habe an den Pflanzen keine Mängel entdecken können und auch keine Anzeichen von Mutationen. Die Pflanzen haben im Durchschnitt eine Höhe von 35 cm, wobei eine etwas stärker abweicht mit 22 cm (wieder eine Epsilon F1). Der Umfang mit LST bei der Cosmos F1 liegt ohne LST bei 20 cm im Durchschnitt, wo wir wieder die Epsilon im Negativen haben mit 14 cm. Die Pflanzen wurden alle entlaubt, das eine Woche vor der Blüte. Morgen werden die Pflanzen erneut entlaubt und ge-lollipoppt. !!!!!!!!!!!!!!!zusätliche infos werden morgen ergänzt + Fotos !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! *1. Foto Mutation: Dieses Foto wurde nur 5 Minuten nach dem Umtopfen der Pflanze aufgenommen. Vorher stand sie in einem größeren Topf, in dem sie genauso aussah. Ich habe sie umgetopft, weil ich den Topf brauchte, aber die Pflanze nicht wegwerfen wollte. Der Pflanze geht es gut, aber sie sieht im Moment etwas mitgenommen aus. Bilder folgen