The Grow Awards 2026 🏆
Likes
Comments
Share
@Sadom
Follow
27.07.: Zu Beginn von Woche 6 habe ich mich dazu entschieden die G41 an dem Großteil der Triebe zu topen. Dadurch erhoffe ich mir einen buschigeren Wuchs mit mehr Trieben und mehr Zeit für die PBB in Größe aufzuholen. An den Schnittstellen, wo die Pflanze getopt wurde ist an einigen Stellen ein roter fast blutähnlicher Saft ausgetreten. Ich hab vorher noch nie gehört oder gesehen, dass das passieren kann und weiß auch nicht woher das kommt. Die PBB brauche ich nur kaum zu trainieren, da benötigt die G41 mehr Zuwendung. Da die Pflanzen größer und die Töpfe mit der Zeit immer trockener werden, verlängere ich die Gießzeit auf 5 min. 28.07.: Heute sind mir zum ersten Mal die Stempelhaare an der PBB aufgefallen. Sie ist also schon bereit für die Blüte. Ich denke, das liegt daran, dass die PBB eine fast flowering Sorte ist. Sie muss aber noch warten, bis sie ihren Platz vollständig ausgefüllt hat. 30.07.: Beide sind gut gewachsen. Die PBB konnte gut gegenüber der G41 an Höhe aufholen. Jetzt sind sie fast gleich groß. Ansonsten gibt es nicht viel zu machen oder bemerken. 01.08.: Zum Ende von Woche 6 habe ich das Scrog Netz installiert. Die kommende Woche werde ich die Triebe immer wieder unter das Netz stecken, damit niedrigere Triebe aufholen können und ein möglichst einheitlicher Wuchs entsteht. Bei der G41 gefällt mir die Anzahl der Triebe schon sehr gut, bei der PBB ist noch Luft nach oben. Ich befürchte allerdings, dass bei der PBB nicht mehr sonderlich viel passieren wird. Nächstes Update ist dann in Woche 7.
Likes
23
Share
First grow. Ph 6.3 /temp 23 /RH%60 /water ppm 210 /Co2 500 ppm/18-6 light/ par value 600/ techna flora recipe for success nutrient cycle. Kryptonite organic worm casting soil. No training yet. 3.5 litres of water every 3 days . First mistake and note to growers and self when using spray bottle to we surface make sure not rip off any leaves as your pulling the trigger...oh well she will live.
Likes
6
Share
@pzwags420
Follow
Week 8 has gone well and she is chugging along. She is still putting out new pistils with some turning orange. Calyx's are growing longer and buds are still soft. I'm thinking a min of 10 weeks flowering for her. I removed some leaves on inner canopy to bring some air and light deeper. She is so bushy its hard to even defoliate maybe next time i will remove some more lateral branches... afterremoving the leaves I must have come incontact with a pollen sack as where I defoliated all seemed to be polinated over night and are making seeds :( I will cut my losses and harvest while seeds are still small.
Likes
Comments
Share
@Raster893
Follow
Entramos en su 4 semana de floracion y despues de una defolacion tardia por mi parte así van respondiendo :) seguimos usando la gran mayoria de los productos de biobiiz.pensando en si empezar añadir bio-heaven o no. Un saludoo :D buenos humooos!👽👽👽👽👽🙏
Likes
4
Share
@Boscaglia
Follow
Plants have really streached this week but it looks like they have almost gotten to full height (I hope). I'm running out of vertical space, but that's what you get with haze I guess. The outside temperature has significantly increased but 30° was the warmest recorded in the tent. Plants have started to really drink up so now I'm doing 1 watering with nutrients and one with water and CalMag with pH corrected to 6.5. Will probably remove a few more leafs here and there to let some lower areas get more light.
Likes
23
Share
Likes
15
Share
@Kurow
Follow
Week one done and I’m very optimistic! Added “grow big” into my watering this week, while also upping the dose of “big bloom.” Also I dropped my light down a bit just to control growth!
Likes
42
Share
@xs8
Follow
Week 6 started with more growth and more LST 😁 🌱👍🏻 ------ Day 38 Amazing how beautiful they are, and until now I'm really satisfied with my first grow 😁🍀🌱
Likes
19
Share
@GeOMaTTiC
Follow
Wk10 11/10/21: Day 64. 💧I have no idea what I should do. Should I chop it now, and use it to compare my next grow to, or wait another week and then chop? I think I'll let the pot dry out one more time, and then cut it down. Might as well have a baseline to go by. With plenty of cloudy trichomes, it's likely a good time to come down anyhow. Everyday I see more and more pistils dying back, but also a bunch of new hairs being pushed out, so it's confusing. I have a feeling that it's going to start foxtailing if I let it go much longer. Right now, buds are still very tight. If I do anything else before harvest, it will be a wet trim of most leaves. 11/11/21: Day 65. Pot is a bit lighter today, but not enough for me to say it's time. I've never been one to harvest just before the lights come on, and just chop it down whenever I felt like it, and had the time. I'm not sure if I will wait until early morning, or just go with what I've always done. I really don't feel like waking up at 4:30 and making a bunch of noise. I should really change my lighting schedule to make that easier, but I would be very unhappy if I couldn't check on, and take care of my plants during the morning and throughout the early afternoon. My thoughts on the plant came true. I opened the tent today, and saw some foxtails forming. Right now it's alright, as it's just a bit more bud to smoke, but if I left it to go for the entire rest of the week, it would definitely look like it had some lumps. So, that means it's time to wet trim, then chop down and hang it. Thankfully I have a small empty tent that I can use for drying. I have a fan in there still, so the air will be moving. Cannot wait to give this a test. 11/12/21: Day 66. 🌲Pot is definitely light enough to harvest today. As much as I'd like this to be my first dark harvest (chop 1 hour before light, or 5 hours after dark), I'll just stick with my usual plan and chop it down later, once I've taken care of a few other small things. I can see even more foxtails forming, and the old ones are now very prominent. I know there are several reasons for that to happen, with one being genetically predispositioned to growing them, but this is not likely the case. They are likely caused by my movent of the plant mich closer to the light, technically just a smidge too close. Oh well, I don't mind a few buds messed up, just as long as it's not the entire plant. Plant is now hanging inside the upstairs tent with a fan for air circulation. I will monitor it's weight loss every two days, and then jar and cure some remaining buds for approximately 4 weeks in my auto cure. It may not last that long, but I'm going to try. I will do my best to keep the main cola separate and intact for a future session. Chop: 88.1g or 3.11oz 11/14/21: Day 68. 35.5g or 1.14 oz 11/15/21: Day 68. Total dry: 20.7g. Bud is actually quite crumbly, so I'm sure once its brought back up to the 64% the Integra pack provides, it will have a better weight. Some smaller buds were smoked for testing, while a good portion is in the small auto cure, where it shall hopefully remain for the next 4 weeks. Updates will be provided once buds are cured for a true smoke report. End Diary As you can see, the plant did not finish on a desired colour. I do not mean a dark purple, but a high level of yellowing in the leaves. It started early in the flowering process, and continued to get worse. The plant however, persevered and finished strong. Even though the plant did not finish up looking like an ideal specimen, it allowed me to learn a lot about the genetics, and how to work with the dry amendments with this strain. Next round will be mich better, I guarantee. Don't believe me! Just watch! We will see it together.
Likes
16
Share
@Chubbs
Follow
420FASTBUDS FBT2107 WEEK 7 These 2 beautys couldn't be growing any better than the way the are. Both have a bunch of flower sites that are maturing nicely. I did give a light defoliation to the lower nodes on the branches. Could almost say a little lollipoping. Happy Growing
Likes
3
Share
Likes
97
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ ❤️💡🌱😽💨 Start of week 2!! All 4 P.G.Cs to be a little slow growing out of the gate but are they're all of equal size...we dropped the SP-3000 a few more inches to combat stretch.. It been an easy seedling week lol..not too much to report..Thanks for doping by and happy harvests everyone!!! 😺🌱 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 7/28 🎈🎈 **** HAPPY DAYS!!! **** 🎈🎈 We just ordered the FC-E6500 by @MarsHydro for our 4x4!! Soooo exciting!! For the first time ever we'll be 100% LED!! 💪😺 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
44
Share
Plant looking way better than it did after being in a clone shipper for 3 days. repotted and pre amended the Jobe's All purpose for 8 weeks. The GH is there to cover the plant until the the all purpose starts to break down in about a week. The blood and bone meal will not be available for at least 2 weeks as they are long term food for the soil microbes.
Likes
1
Share
Extremer Regen und kalte Tage. Die Schnecken haben ihren Anteil gefordert.
Likes
4
Share
40l bowls with new living soil mix 10% 4 plants in a tent with mars hydro FC-6500 4 plants in a tent with 2 SANlight 5 150 Ab heute laufen die Tests der Lampen die für zukünftige Grows benutz werden könnten
Likes
136
Share
~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ We're getting close! These buds are getting absolutely caked under the MarsHydro..you can tell these plants are going to be killer...I haven't pulled the glass out to inspect this week but last week we were only about 20% cloudy, probably 2 more weeks if I had to guess..flushing these seems to be tricky, we've been using water only for approximately 12 days and their color refuses to fade, some are still a little glossy..I think we're going to start watering these every other day with a gallon each until they're finished, harvesting anything that dark has never been good. We have a few plants lined up to flower the day these come down (White Widow likely) ..every Banger clone taken in week 2-3 of flower are growing and of good size now, we'd like to put a few outside this summer ... Not too much else to report, its been an awesome week, thanks for dropping by and happy harvests everyone!! ❤️💡🌱😽💨 ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: 50k+ hrs ⌛ Weight: 10.1 lbs (4.6kg) Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 15 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_
Likes
55
Share
@Roberts
Follow
Fruity Pebbles autoflower is growing great. She just had her roots pruned, lst, and selective defoliation done on her. She is ready to go, and likely will start showing her first pistils soon. Thank you Medic Grow, and I Love Growing Marijuana. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
18
Share
June 7 - We ordered some new lights last week, they are 240w kingbrite samsung lm310h with uv/ir, 3000k, and meanwell drivers. We setup the new room and moved the girls into there. After a bit of LST and a watering (with nutrients) at roughly 7ph, they were ready to go under the 2 new lights and the same SF-1000 we have been using in this grow. The new room is a 12 ft enclosed trailer. I moved everything from the small tent into this. I put clear poly on the walls, floor and ceiling. I put poly on the shelf I am going to be keeping in there as well. I bought 50ft of 6mm mylar and lined the floors, roof and sides with it. I plan to get some reflective tape to seal everything and to cover the wood. I did not get much of a chance to watch temp's today as they it was later in the evening after all was said and done. The inline fan blowing in air from outside. June 8 - 9 AM i checked the plants, they were at 25.2 and 50% RH. Late through the day I had checked and we had gotten up to around 32 degrees. So I moved the inline fan to the closer vent, hooked up to that, and had the air blowing out of the trailer with the inline fan sucking it from above the lights. I then added oscillating fan and had it blowing air on the left side of the room so it would somewhat circulate once I closed the doors. I then checked at about 9pm and we were at 22 degrees. Definitely noticed a decent amount of growth already. I have the lights on a 22/2 cycle as I was worried about the heat at night time. June 9 - Some great growth from the girls, still having problems controlling the temps in the afternoon. I decided to prop the door open a bit to have a constant breeze throughout the day while I am at work. Decided to do some more LST and also a bit of defoliation. I took about 25% of the leaf's that were blocking the new growth as it was getting a bit bunched up. I was then told the leaf's are almost solar panels for them. So from now on I will be trying to just do some tucking unless needed. The leaf's I removed were most of the damaged leaf's, I am not to sure if that makes much of a difference. I gave them a watering with only water as there is a potential I am getting a bit of a nutrient buildup along with the PH problem. Or potentially the reason for the ph problem is nutrient buildup. After watering with A PH of 7 I got some run off and tested it. The smaller plant gave me a PH of about 5.5 where the bigger one is around 5.0. June 10 - Plants are looking happy and showing tons of growth. Seems to be trying to stretch outwards. Not a ton of sign of PH issues showing so potentially getting it under control. Still a bit of damage to previous leaf's but it is what it is! The last few days I have been leaving the door open a bit in order to keep the temps down. I decided to test something and turn the lights off (automatically) at 11AM and back on at 5PM so light schedule has now changed to 18/6 and it seems I may have figured out the issue. We haven't had lots of sun the last couple days so it hasn't been to hard and I have yet to know if it truly fixed the heat issue for now. (I will be looking into a ac unit as well since it typically gets to around 30-35 around here. June 11 - Pulled some of the branches back down and added a few more LST spots. Seems we have a good amount of growth from the smaller plant out of the 2 topped spots. Unfortunately it looks like I fucked up on the bigger plant and only one of the nodes seems to have new growth. I will continue to monitor that but I think I cut the node to low and also to soon. Other then that, the girls are doing great. They seem to be absolutely loving these new lights. I gave them some nutrient water today as well. roughly 3L each. They seem to be A hell of A lot more thirsty under these new lights. June 12 - The girls are doing great , they are still just doing growing away. Lots of progress everyday. I am going to be getting a go-pro so I can set-up a time-lapse for the rest of this grow. I received my new inline fan, I got A ac infinity CLOUDLINE T4 with the temperature humidity controller. I am going to be having one fan pushing fresh air in and one fan pulling out the hot air. I will be doing that tomorrow since I have to work today. June 13 - I ordered another 50ft of mylar and that showed up today. I have decided to remove the shelf and add another 3+ feet to the grow space. So today I installed more poly, mylar, the ac infinity fan. I have it set-up to pump in air if it gets to warm. I am thinking of switching it to the output that way if it gets to hot or to humid I can have that air pulled out of the trailer. Right now my other inline fan is the outtake and I just have it set on full. Overall I think everything is set-up a bit better and more accessible. I will be putting my 2x2 tent in there at the left of the doors so I can have a veg room when these 2 are in flower. I plan to have 4 in veg and 4 in flower for the next grow. Still waiting on JOTI seeds, ordered 3 weeks ago and still have not been shipped. I will be getting those going the moment they arrive. The girls seem to be happy still, did a bit more LST to try to keep everything even, mainly I'm just pulling down on the spots I already have tie wire on.