Recommended
Likes
Comments
Share
Likes
32
Share
Wow I'm love these two lady idk how I'm going chop and idk how close they are any tip are they ready now I was hoping they fill in but I don't want over do it when should I cut today my last day of feeding??
Likes
13
Share
Embarking on another exciting journey with Hella Jelly – JELLY RANCHER strain by Humboldt Seed Company, we have imporved our cultivation conditions to optimize results for these keeper phenotypes. In this run, we are growing Pheno #5, #8, #7, and #1. Currently, we are five weeks into the vegetative stage, and our plants are thriving.Previously, they were somewhat root-bound due to their prior location, but we have transplanted them into 10L pots. All our plants have undergone meticulous topping and training, and we are now leaving them to flourish. We have a scrog the net which is being installed in the next few days, and we will feed the new growth through the scrog untill the screen is filled. Speaking of lighting, our setup currently features a 450W full-spectrum quantum board, operating at maximum capacity and strategically positioned to maintain favorable temperatures. Notably, we've introduced UV bulbs into the equation (2 x 26W UVB bulbs). Initially, we'll expose the plants to 30 minutes of UV light twice daily, gradually extending the duration to 4-6 hours daily as we enter the flowering phase. For the flowering stage, we'll make the switch from the 450W Quantomn board to the Spyder 2p 650W. In preparation for the plants daily fertigation needs, we've installed a drip-feed system, which will come into play as soon as the plants begin to show signs of drying up daily. Our target date for inaiting the flowering stage is set for the 1st of October. We are genuinely optimistic about the outcome of this run, so please stay tuned for regular updates!
Processing
Likes
3
Share
This week they proceed quickly apart from some small external climate problems still a little too cold but generally everything is ok, no problems neither with water nor with too much ferlizing .. So I can say that everything is going in the right direction! How about?
Likes
31
Share
welcome to 📅 Day 50 : flower 5/3/2021. not to happy with the deficiency problems I'm having but she is growing well still. I will be dropping the amount of nutes to 1 mil a L from 2ml a L but leaving the cal mag the same. I'm very happy with the MH TS 1000💡 and they plant also seams to agree update 📅Day 52 : flower 5/5/2021 Not to much change it the problems yet but I have noticed she is getting fatter under the Mars Hydro TS 1000 she is loving the 💡 and I am too so lets see how she does.
Likes
82
Share
Week 7 Flower We've finally started flush 💦 on Day 43. I still run EM1 at 1ml/ltr as it goes a long way once activated/stretched. It's always going to be a benefit to keep any microbes you can in the coco. You can also use Mammoth P throughout flush, but due to its price I just stick to EM1 in flush. There's plenty of other microbes that can be used too. I flush around twice the pots' volume at 6pH. But before flooding the pot I slowly pour water through the centre of the pot, around the stem, in order to take a true reading of the ppm and pH of the run off. If the ppm/ec reads a lot higher than your average feeding throughout bloom, then there's been issues such as a lockout, incorrect pH, over feeding etc. This wasn't the case, as this girls' was at the right level. If the pH is too high or low, I adjust the pH of the rest of the water that'll be flushed to try to fix it. Again, this wasn't the case with this girl as she had a perfect pH 👌👍 Just before all of the water has gone through the pot, I take one last reading from her last bit of run off. The ppm should be down to no more than 100ppm for the first flush (+starting ppm of water if using tap water). After the first flush the ppm value of the run off will quickly go all the way down to 0, or at least below 50ppm (+tap water ppm). I use tap water that is between 150-190ppm, but I'm looking to switch to RO as soon as I can. I still get a very good flush, but I think using RO water will be the next step in getting a more thorough flush as it won't contain even the small amount of nutrients and metals that tap water contains (along with any harmful chemicals). Always remember to bubble or let the water sit for 24-48hrs before feeding to your plants. That goes for all feedings in every stage of growth if using tap water. Because I keep fairly low temps in the Den she's starting to turn a beautiful dark purple. Her buds are still swelling and smelling like a nice gassy OG, with hints of citrus/tropical fruits. I'm really looking forward to taking this girl down, but after at least another week! Thanks for following and happy growing! 🐺
Likes
3
Share
16/12/2024. He bajado la cantidad de hybrids de la solucion para agregar más pk13/14. El riego para esta semana será el siguiente: Parto con agua base de 0.3 EC, completo hasta 0.6 EC con calcium, luego completo hasta 1.7 EC con hybrids y termino de completar hasta 2.5 con pk 13/14 de canna.
Likes
14
Share
Elle va bien . Rien de trop compliqué avec Gaïa Green et environ 3 l d’eau à tout les 2 3 jours…
Processing
Likes
15
Share
Que pasa familia, arrancamos la 3 semana con un trasplante a 7L, en tierra all mix, y es que sin contar ese error con la caída, los 2 ejemplares están perfectos y sanos. La humedad la tenemos algo por debajo pero 55% estaría dentro de nuestro parámetro. Esta cepa pinta de 10 familia.
Likes
244
Share
So here is my week report on the fabulous Supafreak by HiElevation Genetics. Buckle up, because this girl is a wild ride! Oh my, let me tell you about this Supafreak. She's like no other girl I've ever grown before. From the moment she sprouted, I knew she was something special. Her unique characteristics and unruly growth had me hooked from day one. Now, we're approaching her final days, and it's time to make some crucial decisions. I've decided to stop all feedings and switch to just watering with Aptus Holland Fluvic Blast. Why, you ask? Well, let me break it down for you. First, let's talk about this Fluvic Blast. It's like a secret weapon for plant health. Fluvics are organic compounds that enhance nutrient uptake and stimulate plant growth. It's like giving my Supafreak a supercharge of awesomeness. And let me tell you, she's responding to it like a champ. One of the reasons I've chosen to go this route is because I believe in reutilizing my soil for future grows. It's like giving back to Mother Nature and keeping the soil alive and kicking. Fluvic Blast helps to replenish essential nutrients and promotes soil health, ensuring that my future plants will have a solid foundation to grow upon. Now, let's talk about her close-up shots. Oh boy, the trichome production is out of this world! It's like she's showing off her bling, sparkling with potency and beauty. I can't wait to see how she develops in these final days. And the smell, oh my goodness! It's unique and peculiar in the most delightful way. It's like a symphony of aromas that tickle the senses. I can't even put it into words, but trust me when I say, it's a scent that will linger in my memory forever. So, my friends, there you have it—my joyous, knowledgeable, and fun report on the magnificent Supafreak. She's one for the record books, and I'm grateful to have experienced this journey with her. Stay tuned for the grand finale, where we'll uncover the full extent of her freakiness. Until then, keep growing and keep smiling! As always thank you all for stopping by , for the love and for it all, i fell blessed to have you all with me for one more love journey, and a different one form the rest i did so far <3 <3 <3 Thank you Thank you Thank you , you guys are great and have been amazing , thank you for everything <3<3<3 #aptus #aptusplanttech #aptusgang #aptusfamily #aptustrueplantscience #inbalancewithnature #trueplantscience #dogdoctorofficial #growerslove
 With true love comes happiness , Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so <3 <3 <3 <3 <3 <3 Growers love to you all <3 <3 <3 Here are the words from this peace of art from nature creator Shapeshifter's @ HI-ELEVATION GENETICS <3 <3 <3 "FREQUENTLY ASKED QUESTIONS Q. How did you create/breed Freakshow? A. Methodical selection, line breeding, and culling is the short answer. Read our About page for more details. Q. Is it an indoor or outdoor type? A. Everything I've ever worked has been outdoors, including of course Freakshow. It has been our experience that outdoor (or sun grown, as it's recently being referred to) cultivars seem to perform extremely well under artificial conditions. This is true of seed starts or clones made from seed starts. The opposite is not always true; indoor clones often give an outdoor grower headaches because they don't always make the transition smoothly. This is due to light spectrum, temperature, and/or photoperiod changes. Yes, Freakshow will do exceedingly well indoors, and will thrive and mature just fine in a wide variety of natural environments as well, so it's definitely both and I think might even prove to be more resilient to those sorts of transitions. Q. What are the potency and terpenoid levels? A. Average 18-20% THCa, THC; negligible CBD, CBN with terps variable, averaging 2.5-3.5, primarily limonene and pinene, but this is variable, there was a lot of diversity in terp combinations and compositions in all the prior generations, it's just something that was left "as is" for now. The different parallel lines that we are developing can be directed in a few different pathways flavorwise. Q. Why are the seeds white? A. Why is the sky blue? No, the mature seeds are shrouded by a rice paper thin membrane which has coloring and mottling on it, but it's so fragile that it disintegrates in the process of shucking. Stripped of the outer layer the seeds are very pale, nearly white. It came as no surprise that this plant would have abnormal seeds. Q. Is it a GMO? A. Wow...? Well, it's seriously "modified" and the modifications are definitely genetic, and it is an organism. (Genuinely Modified Organically!) Uh, no. No radiation, no recombinant DNA, no gene splicing or editing, no TALEN or CRISPR! These biotechnologies don't belong in the food and medicine plant industries. Sadly, in the near future it will become commonplace and widespread in cannabis and other medicinal plants as it is already is with food crops and ornamentals. I'll avoid discussion on this topic for now, but we hope some people enjoy consuming Frankenbud! Q. What's the floral period length? A. 8-9 wks, finishes early Oct. at most latitudes and elevations. Q. Is it a big producer? A. Freakshow will produce nice, fat, dense colas (see gallery) with remarkable trichome coverage, and you can expect yields according to your veg. time, root space, and general knowledge and expertise as a gardener. The same set of variables apply to expected outcomes regarding cannabinoid levels and terpene profiles. Q.What is the lineage? A. (Bigbud x Skunk#1) x (Big Sur Holy Weed x Banana Kush). NLD("Sativa") dominant, but the afghanica influence is apparent. I'm pretty sure that Freakshow contains some Trainwreck and some Maui Wowie based on some research I did on the origins of the Pineapple Express. Interestingly Big Sur Holyweed, OG Kush, Banana, Trainwreck, and Maui Wowie are all of unclear origins. We have to remember that these are all just names and that they don't really mean much. The exact heritage of any cultivar today is impossible to determine accurately. Also, considering the amount of continuous shameless hybridization that has occurred in the last 40 yrs., any modern kind could easily contain over 40 kinds. In the case of Freakshow, it's much more limited because the ancestry is largely older "Sativas" that didn't go through as much outcrossing. In the 70s in Santa Cruz, Haze was a favorite among surfers for the pure energy and I still have (greatly improved) stock of it around, simply because even when I made hybrids with it I always kept the original in pure form for obvious reasons. Q. What is the psychoactive effect like? A. Like the flavors, many people have commented that the "buzz" is somewhat different than other mainstream types out there. It's not entirely out of the scope of imagination that given that this strain has new alleles in so many other respects, that it could also contain new, unique cannabinoids, as well as new and unique terpenoids, some of which may not even be among the standard 16 or so that the average lab is testing for. Aside from the up, cerebral, energetic boost, some report a mild time/space warp effect. Creativity and idea induction should be mentioned, for sure. Freakshow has the pure energy effect and greatly alters perception to the positive side, so definitely destroys depression. Appetite suppression is a side effect, but the enjoyment of food is enhanced. I personally will attest to all of the above. We all have different receptor profiles, so these are just generalizations. Couch unlock. Q. Is it pest and mildew resistant? A. Indeed it is. On many occasions in the last few years, it has been observed that when pest and mildew issues were affecting other plants adjacent to in the vicinity of Freakshow plants, for unknown reasons the freaks remained entirely unaffected. This includes 0botritis, PM, various mites and insects, soil fungus, etc. We haven't heard any complaints along those lines so far, so if anyone has any problems, especially with a rigorous IPM regimen in place, we would like to hear about it. And if anyone can attest to the extreme level of resistance it seems to have we'd love to hear about that as well. Q. Does it contain web-leaf genetics? A. I thought I better clarify this because there are a few people thinking that because of an article "Growing Marijuana that Doesn't look like Marijuana" that mentions that I had worked web-leaf types years ago and had eventually turned that into Freakshow. This is incorrect and I'm needing to get ahold of the writer to have him change it. When I read the piece and saw the mistake I figured it didn't matter that much, that the actual method of breeding could just remain a "trade secret". Recently, I noticed online that a posting, "Freakshow only exists because of duckfoot" by Curious Cannabis Connoisseur, where he explains how I developed Freakshow using Duckfoot. Let me explain, about 20 yrs. ago a friend gave me a jar of seeds labeled "BC Bigbud" and I sprouted flats of hundreds to look for oddities and had found one web-leaf pheno which we named Webster. It was a female so I bred it to a normal leaf male and began selecting and stabilizing a line of Webster. About 5 or 6 generations later I had nailed it to 100% webs and had also stabilized it for a deep purple color and a nice "gingerbread" terp profile. I was busy working other lines at that point so I put Webster in the library. Also, I was having a hell of a time getting a pheno of it that flowered to my satisfaction. (it seemed to finish with a limited number of calyxes). I knew I would have to outcross it to something with a big tasty bud and restabilize it for web-leaf, and I no longer had the original BC Bigbud. I still have the Webster seeds, and trust me the thought has crossed my mind to make the cross with Freakshow, but why? Why mess around crossing things just to create something even weirder? I have heard that the "Duckfoot" also doesn't bud up well so maybe there's a correlation there. Anyway, people can do what they want to and I will too, but crossing Freakshow with some low-THC crap like ABC is in my opinion idiotic. I worked extremely hard stabilizing and perfecting a beautiful new subspecies and I believe it should be kept pure. I won't go on a rant here about the rampant crossing and the lack of line-breeding in the cannabis world in the last several decades, or where this will eventually lead us, but I will say that it's not in a good direction. Bottom line....Freakshow has no web-leaf genes, it was made using top-grade tropical narrow-leaf drug (NLD) cultivars. Q.Why is Freakshow patented? A. Although I and most others (including all the folks at HSC) believe in and subscribe to the concept of "open sourcing" because sharing in cannabis genetics was always the cultural norm, it was decided that Freakshow should be protected (1) because it is a novel and unique, not a preexisting strain (or even subspecies), (2) To keep the greedy corporate big boys from exploiting it, (3) To maintain control of the genetic refinement of it in all future generations. We really can't wait to share it with the entire collective world of cannabis enthusiasts and invite experimental breeding for personal use and curiosity." source https://freakshowcannabis.com
Likes
8
Share
@KCduzit
Follow
Flushed once and light defoliation this week as it’s one on the last times to do so before trellis net goes on. Also one of my last applications of organic insecticidal soaps (preventative) and Magnifical applied as a foliar spray. Low stress training for very last time and released by the end of the week. Girls are looking healthy with a few clearly showing sex. New intake fan and exhaust next week for when heating comes on in the house.
Likes
11
Share
@SackShopG
Follow
I did a 5 day flush and 5 days of 24 hour light before harvest. Dried for 16 days with 60% humidity
Likes
5
Share
@SkunkyDog
Follow
Hallo zusammen 🤙. Habe sie heute geerntet. Musste sie nicht düngen in den 80 Tagen 🤙🤤 Wir sehen uns in 3 Wochen mit dem Erntebericht
Processing
Likes
7
Share
@Kushizlez
Follow
Days 35-42 (Day 36) Some minor problems starting to arise here. A few times this week it got up to 90+ degrees which I think may have caused a bit of heat stress in some of the plants. I’m seeing a bit of cupping/crinkles on some of the fan leaves and some of the new growth is looking pretty gnarled and twisted. I hear windburn can cause this too so I’m turning my fans down to low speed. This could also be a problem with humidity so I’m going to turn off my humidifier, dim the lights and raise them. During my last feeding I mulched in some worm castings but it seems like they’re keeping the soil/coco from drying out. Pots are still decently heavy and even the surface is still quite moist but they aren’t showing any major signs of overwatering. I figure it will only be a few weeks before the castings break down so I will just leave it. A few of the plants are starting to show yellowing leaf tips which is probably some kind of micro nutrient lockout from my PH being slightly too high. It could also be from nute burn so I will water in 6.0 until I see some runoff. Although the most likely culprit is potassium excess. I’ve been feeding potassium almost as much as nitrogen so far. I know that can cause the yellowing of leaf tips by locking out trace minerals. It can also cause leaf problems like crinkling. Excess K can even cause water retention! Will water at 6.0 until run off next watering. The lst is coming along nicely. It was a good idea to remove the first two sets of branches (not leaves). Now I have 4-6 perfectly even stems coming from each plant that I plan to top one more time each. (Day 37) Today I’m going to vacuum, clean, wipe down and spray all my equipment in the tent. I’ve been letting the floor get quite dirty and I haven’t had the chance for a thorough clean since last round. I’m kind of surprised I haven’t seen any powdery mildew yet. I guess the prevention spray is working because the room has to be infected from my last crop. (Day 40) I was reading that you can foliar spray whatever you are deficient in for an immediate uptake. I‘m going to try that with my current potassium excess since it locks out trace minerals. I’m going to foliar feed a bit of phytoplankton at 15ml/L and some MagnifiCal + VeloKelp from Remo nutrients both at 5ml/L. The cal mag is not organic but as long as it’s not going into the soil and doesn’t contain chlorine I’m fine with it. I’m also going to be changing the light cycle to 18/6 for the remainder of veg. This will be their first dark cycle so they can properly foliar feed. Edit: humidity shot up to 85% a few hours after foliar spray. I went to top dress everything today and I mixed up the plants while doing so! So the ones I was unsure about I gave 1 extra tablespoon. I won’t top dress again for at least 10 days. Might give a light tea sometime next week. I also tilled the shit out of the top of each pot. It had a hard crusty layer on top that was keeping the medium from drying out properly. I’m not going to water again until everything is bone dry. Then I will water until slight runoff at 6.0 ph with some Dr. Marijane bacteria/root probiotic. I’m starting too see a lot more of these abrasions on some of the bigger fan leaves. It almost looks like thrip damage but I’m 100% sure it’s not a pest above ground. It could be bulb mites, which I found in my worm castings but I can’t check until the roots are more established in their pots. The leaves themselves are cold and feel damp to the touch. I haven’t even seen a fungus gnat since I last fed. I’m hoping it’s related to the K excess and clears up with the troubleshooting. (Day 41) Just ordered a wire cube rack to prop my plants up with and help evaporation/root warmth. Each cube is 11.8”x11.8”x11.8” and it comes with 16 cubes. So it will fit just perfectly in my 4x4. Depending on the size, I might order another one for the flower room where I would need 25 cubes.
Likes
19
Share
Trimmed a bit more & added a few more LST clips on day 74, watered with just Pro-TeKt to get the PPMs down still high at 2567 average, I may do so again next time, I suspect this coming week to be the final veg & will be flipping at the end of it.
Likes
18
Share
Our Do si Dos F1 Hybrid Autoflowering from Zamnesia are in great shape at the moment, they had a bit of a hesitant start but now they are in line or even better than others. They have done so well this last week (I love when they start like a rocket after having fueled up with fertilizers) that we have already reached the good internode for topping autoflowering plants which if you want to do it guys it should be anticipated as much as possible as I explain below. The other one will fly away straight to preserve the main cola which is the main dilemma of topping. The first question you have to ask yourself when topping is, Are you ready to give up the main cola? Applied Techniques - Given the numerous requests from growers, we decided to show you what happens when applying topping + Lst to autoflowering plants. It is very important to anticipate it as much as possible, autoflowering plants go into flowering at about the 5th intenod, you have to anticipate that moment to give the plant the chance to vegetate as much as possible. In general, when you see that there are two good lateral branches you can do topping, they will go into veg as much as possible and you will have a split plant, I have seen very beautiful results, especially in warm periods in which the plant tends to vegetate a lot, in winter we could have a bit of dwarfism but with a lot of resin for sure. So I cleaned everything and cut at the top leaving only the main growth line, called Main Lining, the florets will be lowered during growth and the plant will eventually be like "split" in the main line with the various branches. On photoperiodic plants, however, we will do topping repeatedly, which is not recommended with autoflowering plants so as not to lengthen the times of plants born to finish in 10 weeks too much. The second week (including a few days of germination) we gave Power Roots 1 ml/l, Pure Zym 1 ml/l, Sugar Royal 1 ml/l, Alga Grow 3 ml/l - Plagron nutrients are available at Zamnesia in convenient pack formats for all growing styles. I used this one with a simple search you can find the other products. ---- https://www.zamnesia.io/it/12119-plagron-top-grow-box-100-naturale.html Try a seed of this variety that drives us crazy... ---- https://www.zamnesia.io/en/10664-zamnesia-seeds-do-si-dos-f1-automatic.html Description Zamnesia // From the team at Zamnesia Seeds comes Do-Si-Dos F1 Automatic. Using consistent and reliable F1 genetics, this strain is not only incredibly easy to grow, but also offers potent and delicious buds. The plants remain small and offer a reliable growing experience that everyone will enjoy. Growbox and Air System - Secret Jardin DS120w + fans + exhaust fans and DF16 filters kit ---- https://www.secretjardin.com All the best that mother nature has to offer is at ----www.zamnesia.com
Likes
19
Share
@Bud_Zilla
Follow
Found large numbers of spidermites as well as some thrips. Luckily all were on my marigold plants, a few had wondered on to my ladies but the issue has been contained with minimal harm to the plants
Likes
92
Share
Week 10 - Second Week of Flowering 🌸 As week two of flowering begins, the garden’s growth is unstoppable! These ladies are thriving, stretching up while staying beautifully vibrant and green. Every inch of this tent is optimized—each plant is soaking up light, nutrients, and water precisely as they need, filling the room with energy. Room Conditions 🌡️ • Temperature: 27.3°C • Humidity: 62.6% • CO₂ Levels: 800 ppm • VPD: 1.36 kPa (excellent range for robust flowering) • Lighting Intensity: 818 PPFD Solution & Medium 💧 • Solution Temp: 21.5°C | TDS: 470 ppm | pH: 6.02 • Medium: Moisture 100% (recently dried to 67%), TDS 510 ppm, Temp 22.5°C The “dry-out” to 67% was a strategic move, helping boost nutrient uptake and root strength. Meanwhile, our slight increase in reds seems to be having the desired effect, nudging these ladies further along in the flowering process. Eye Safety & LED Lighting 🌞🕶️ With powerful LED systems like the ThinkGrow and ICL-300, eye protection is critical. LED grow lights emit high-intensity light across the full spectrum, including intense UV and infrared components that are not easily detected by the human eye. Long-term exposure without adequate protection can lead to eye strain, and in extreme cases, damage to vision. • Blue Light Hazard: LEDs often have elevated levels of blue light, which can harm the retina over time if proper precautions aren’t taken. • UV Protection: Even low doses of UV can accumulate and harm eyes, so grow glasses with UV protection are essential for any indoor gardener. Investing in quality grow room glasses can help protect from glare, UV, and infrared rays, making plant care safer and more comfortable. Lighting Enhancements: ICL-300 In-Depth 🔆 The ICL-300 is our newest addition, specifically designed for inner canopy illumination. This LED offers a targeted light boost under the canopy, enhancing flower growth in lower and shaded areas—ideal for maximizing yield and light efficiency. • Dual Spectrum Technology: The ICL-300 provides a custom spectrum designed to penetrate deeper into the plant canopy, promoting robust bud formation throughout. • Enhanced Light Distribution: With strategically positioned diodes, the ICL-300 reduces shadowing and balances light distribution to all parts of the plant. • Energy Efficiency & Heat Management: This light is designed to be energy-efficient, running cooler and reducing the risk of heat stress within the grow space. The inner canopy light gives the plants exactly what they need, particularly during the flower stage when bud sites deep in the canopy can benefit from more direct exposure. However, after noticing slight leaf burn on some plants, I’ll hold off a bit longer before fully integrating this light to ensure optimal adjustment. Looking Forward 🌟 As we continue dialing in conditions, it’s all about balance, precision, and taking proactive steps to optimize every aspect of the grow environment. We’ll keep a close watch on the canopy height, and next week, I’ll aim to fine-tune the light integration even further with the ICL-300. P.S. - ICL-300 and CO₂ Sensor 🌱 The TrolMaster CO₂ Sensor (MBS-S8) has been crucial for real-time CO₂ adjustments, ensuring the plants get exactly what they need without constant monitoring. Combined with the ICL-300’s spectrum flexibility, these tools make an unbeatable setup, allowing for nuanced control over plant growth and development. As always, a huge thanks to the Grow Fam for the tips, support, and enthusiasm! I’m excited to see what these next weeks will bring as these plants reach their full flowering potential. Stay tuned for more updates, and don’t forget: eye safety first, growers! 🌞🌿 Discount Codes so you can save big on your next check out 💚💚💚 Kannabia - DOGDOCTOR 30% off SeedsmanSeeds - DOGDOCTOR 10% off CannaKan- DOGDOCTOR 15% off terpyz.eu - DOCTOR 15% off The Neutralizer - PORKIT5-DOG 15% off As always thank you all for stopping by, for the love and for it all , this journey of mine wold just not be the same without you guys, the love and support is very much appreciated and i fell honored and so joyful with you all in my life 🙏
 With true love comes happiness 💚🙏 Always believe in your self and always do things expecting nothing and with an open heart , be a giver and the universe will give back to you in ways you could not even imagine so 💚 Friendly reminder all you see here is pure research and for educational purposes only Growers Love to you all 💚💚💚
Likes
Comments
Share