The Grow Awards 2026 🏆
Likes
Comments
Share
Another good feed this week and took a few leaves off, both plants doing really well, drinking loads with the sun and size of them. Not much smell yet but plenty of time for that. That’s all this week, happy growing 🌱
Likes
38
Share
Note: I didn't necessarily flush but I didn't add any more additives or nutrients while away so I've set the nutrient values in the diary to null. --------------------------------------- June 12 (Day 90) --------------------------------------- Away - Camping. --------------------------------------- June 13 (Day 91) --------------------------------------- Away - Camping. After camping, they survived the summer heatwave and look pretty good. The stench in the tent is not like your typical Northern Lights or White Widow. It's straight-up funk that hits you in the back of your throat. I can't really pinpoint any specific scents but it's a very rich and pungent odor for sure. I’m 100% confident the roots are probably degrading with rot after the warm temps. The only problem I had while away is was the AC fills into a 5gallon bucket and it couldn’t keep up with demand about an hour before I got home. After a quick cleanup, I took a closer look and I’m happy with trichomes on both plants. This was supposed to be a 65-75 day fast finisher. Today is day 91. I’m satisfied. I consumed a test bud on weekend that went under a 3 day dry. White ash, no harshness, and punchy in regards to the effects. Chopping them tomorrow.
Likes
9
Share
@Xabii
Follow
This is the start of my second grow and also second Northern Light Auto from RQS, the goal is to hit #1 in g/plant for that Strain. I didn't take as many notes as in the last grow but there are timelapses, some photos and metrics from probes. Started with 3 Seeds and then picked the 2 strongest. The System is a NFT System but due to the size of the tube and root growths the solution with submerge the roots ~70% later on. To combat that I use 3 small 1.5w air pumps, these are super silent, if one dies I got 2 more running and to be honest air pumps used in DWC systems are often oversized and rely on Broscience. In my Salad/Herb NFT Systems I don't use any air pumps and the plants are just fine and grow great. This time I added sprinklers to humidify the air inside the tube, slightly moisturize the Rockwool and speed up root growths. Spoiler: Was a great success :) The ratios for the fertilizers are not accurate in the following weeks, I have a 120l Reservoir that is filled 90-110l I top it up once or twice a week to sustain PH and EC, if you want to copy it just go by the EC and use the B (Calcinit) and A (Kristalon Blue/Orange) 50/50. I mix the solution myself with dry salts that I bought in bulk 25kg bags. 4l Water(distilled/RO preferably, tap water is OK) + 1kg salts mixes just fine, keep the solution dark and cool and it will stay stable for months. Dry salts don't expire if kept cool and dry so only mix what you need and keep the rest stored as dry salts. 40ml A + 40ml B is about 2EC and 6PH with my tap water, very similar to Canna, Plagron etc. isn't it? just with the twist that I pay ~20% of the known brands. P2O5, K2O, MgO etc. are always the same as long as they are produced by a good manufacturer, Yara is a world leader in fertilizer production just not to be found in you general hydroponics or hardware store. Any other known manufacturer is fine as well, pick the cheapest. Check Hoocho on Youtube to see a guide on how to mix your own solutions, it ain't that difficult trust me. From week 5 onwards I also use Oxygen granulate (KMPS, CAS-70693-62-8, 2KHSO₅ * KHSO₄ * K₂SO₄) if you want to use this check pool supply stores and buy the cheapest. Keep this one dry, cool and dark. I used a old pill bottle to keep some ready to go because it came in a 1kg container and I only need 2-4g per serving + the bottle has a silica pack in the cap. From week 6 onwards I used Haifa Grow Clean for Details check week 6, I use this one as dry salts and add it directly to the tank, it does not interact in a bad way with the solution. For meassurements I use a generic 8in1 Meter "PH-W218" branded by many companies, as usual, check stores and buy the cheapest. (Check week 1 for an image of it) I got mine from Aliexpress for ~70€ it uses the Tuya app so you can always check your metrics and export them aswell. The PH and EC probe are accurate and are giving me stable results for almost 1 year now, I re calibrate the PH probe once in a while and it is tops 0.15 off after a month, always double check your results with PH drops/paper. Bluelab is... A LOT more expensive for less value. For the timelapses I use 2 Tappo C210 2k Cameras, these have the ability to make the stream available trough RTSP so that you can access it trough a link in a browser and that way I snap a Screenshot with a raspberry pi :) after that I just render it with blender to a timelapse. Sadly they seem to have trouble with the bright lights and I get image trouble over the course of the day, if you have a recommendation hit me up :) The script I use to take the Images: #!/bin/bash ########################################################################################################################################## ##### A script to save images from a rtsp capeable IP cam, Tapo C210 (2k image quality) for example in my case. ##### Images are saved in a directory named "2024_01_01" for example, it uses the "date" command within the system it is running on. ##### You can then render the images to a timelapse, I use blender for that. ########################################################################################################################################## RTSP_URL_LEFT="rtsp://:@:/stream1" #sets the variable for cam LEFT access RTSP_URL_RIGHT="rtsp://:@:/stream1" #sets the variable for cam RIGHT access while true; do TIMESTAMP=$(date +"%Y_%m_%d_%H_%M_%S") #sets the timestamp variable DIRECTORYLEFT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for LEFT DIRECTORYRIGHT=/$(date +"%Y_%m_%d") #sets the directory variable with current day for RIGHT mkdir -p "${DIRECTORYLEFT}" #makes a directory for each day if it doesn't exist for LEFT mkdir -p "${DIRECTORYRIGHT}" #makes a directory for each day if it doesn't exist for RIGHT ffmpeg -y -i "${RTSP_URL_LEFT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYLEFT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for LEFT ffmpeg -y -i "${RTSP_URL_RIGHT}" -frames:v 1 -vf "format=yuvj420p" "${DIRECTORYRIGHT}/${TIMESTAMP}.jpg" #captures a frame from the RTSP stream and save it as a JPEG image for RIGHT ################################################################################################################################ ##### Waits for 180 seconds, change that depending on how precise you want the timelapse to be, less waiting = more images ################################################################################################################################ sleep 180 done Hope you like my diary, leave a comment and a like if you like it :)
Likes
127
Share
@DreamIT
Follow
There isn't much more to say about this fantastic strain. Hardy, easy to clone, quick to flower and absolutely delicious in every respect. It resists well to high temperatures, "accidental" over fertilization, and recovers soon after a period of drought. Easy and fast.
Likes
12
Share
Day 29 of Veg Watered once in the past week Defoliated large leaves Plant 1 = 8 inches Plant 2 = 10 inches Plant 3 = 8 inches
Likes
107
Share
Week 10 Flower After 4 whole weeks of flush this girl has finally met the scissors ✂️ It took her quite some time to fade out, but after cutting down the most faded half of the plant that was closest to the light on Day 65, and then the rest on Day 70 it was long enough. I'm very impressed with how fat and chunky this girl has become. I wasn't expecting quite this size from first look at her thinner stems and branchy structure earlier in flower, but her buds have swelled up nonetheless and she's stacked well. I always cut my girls down around half an hour (or a bit more) before the lights are due to turn on. This prevents her from starting any chlorophyll production in order to maintain the best flavour and burn. Only a few fans were taken off before being left to hang dry as she's absolutely covered in trichomes! Don't throw away your sugar trim (leaves with trichomes) as this can later be used for dry sift, which can then be pressed for some dank rosin. Harvest update coming soon! Thanks for following and happy growing! 🐺
Processing
Likes
19
Share
For some reason it's say 9 weeks flower. But it's only 4 weeks flower. Lol. Going well I guess for a 1st grow. Looking nice n frosty at 4 weeks.. Got a alien in the corner lol which knocked me.. Turns out to be a different strain.. 5 n half foot monster.. N still going up.. Have enjoyed this 1st 1 and hope to do more. Has any 1.got n ideas for next. 1 myt try autos. Are they easy to grow? Is is it best to stay away from them.. Happy growing ppl
Likes
18
Share
@Mazgoth
Follow
Not really big buds but going really good,they have time to grow more flowers but don't hope too much,still love them,D53(Update)I purchase an CFL maxibright 200W and I'm gonna still with that until harvest
Likes
Comments
Share
Likes
5
Share
@Rizza78
Follow
Going to do some dark time before the flip. Should boost the phytochrome A before starting the 12/12 schedule. Opened up some new growth with the stress clips. Time to flower for my first time! I’m very excited to learn this stage! Any comments please add thanks all!
Likes
6
Share
@A_Beefy
Follow
A bit of nute burn. Burnt tips on a few leaves but still continued to feed nutes to this lady. Good growth. Will not be topping this one just defoliate.
Likes
8
Share
È stata una settimana molto calda e piena di bellissime giornate, il meteo è meraviglioso questo periodo. Le bellissime autofiorenti dutchfemseeds sono tutte vicinissime alla fase finale della fioritura e alcune sono già pronte per essere raccolte ma aspetteremo un altra settimana abbondante prima di raccogliere tutte le infiorescenze mature in maniera graduale. Molto colorate le mimosa Purple Kush e molto resinose, il resto delle varietà ognuna ha il suo aroma speciale ed inconfondibile,tutte molto resinose e piene di infiorescenze molto dure e cariche di resina appiccicosa. Sono felice perché queste varietà come sempre soddisfano a pieno le mie esigenze e sono spettacolari vederle fiorire nel giardino. Alcune sfiorano il metro ed ottanta centimetri di altezza con infiorescenze ovunque. Manca poco! Un abbraccio a tutti.
Likes
37
Share
Bueno ya empezamos ahora a sumar semanas y ver el gran resultado de este gran banco
Likes
6
Share
Харвест был тяжелым и занял 3 часа , так как она была огромной . Как итог 1350 г мокрых и протримленых шишек . Все цветы отлично созрели , даже те , которые находились ниже . Я дал ей достаточно времени созреть и она меня очень удивила ✊🏻🔥
Likes
2
Share
Almost ready to start feeding nutrients noticing better results so im guessing they love the new environment.
Likes
6
Share
So, the big day finally came!💚 I harvested the plant and got her cut and hung up to dry. But before that, she spent a solid 72 hours in complete darkness to finish off. (A little boost before the chop)🌿 Everything went as planned and is looking pretty good so far. Nothing out of the ordinary, just smooth sailing through the final stage. Now it’s all about patience while it dries properly. Can’t wait to check out the final results in a couple of weeks! 🌱
Likes
4
Share
So far so good. Frost Banger is showing some purple hues and the Purple Haze is full on developing purple buds. The FBA2504 is my fav in this run shes tall and still growing, looking healthy except she has a lil Phosphorus deficiency at her top leaves but other than that they all are doing good. We are already on day 43 with this run!
Likes
10
Share
Week 16 and two of the plants are almost ready for harvest, probably next week I’ll be trimming, Grape Diamonds and Cotton Candy Grapes. After that I believe that the rest should be staggered for a good harvest in two more weeks.