Likes
Comments
Share
@MT_Farmer
Follow
The plant rose above the ground on the 24.6., this is Time Lapse ends on the 13th day of vefetation. I started the grow in my old cupboard grow sed up. I opted to upgrade the the Home Box Q80+ in the coming week. As i was using the Pro Mix i dont need to ad any nutrients for about 4 Weeks. Therefore for now I am only monitoring the amount of water i give them. As I decided to give Air Pots a try for this grow, I am intersted to see how much i can water, relative to my previouse grow with a fabric pot.
Likes
13
Share
Last days for most of them - only Strawberry Cough will stay longer - she is super hungry and I can not keep up with feeding her - most of leaves are yellow now. 😱 The rest - four plants will be harvested on the weekend - 2-3 days from now and frozen - I'll be making bubble hash and fresh frozen live resin from them in the following weeks 😈 Trichomes are mostly milky with some amber starting - ideal ripeness and time to freeze those glands
Likes
8
Share
Hey guys :-) This week the growth was going strong but nothing else great happened this week :-) Watering was done twice, each time with 1 l (nutrients see table above). LST will be applied and topped again next week. have fun and stay healthy 🙏🏻💚 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Greenhouse seeds Company Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany
Likes
2
Share
Couldn’t upload week 8 pictures because I was abroad
Likes
14
Share
Likes
78
Share
@Hou_Stone
Follow
My 4 plants are still there, with the banana as a smile 🍌😁 I continue the defoliation, I wonder if I'm not doing a little too much sometimes.. We will soon see the result 🌗Switching to flowering this week, I reduced the length of the day by 1 hour each day until reaching 12 hours night time / 12 hours daylight on the 33rd day!🌞 🌺On the 33rd day I apply a layer of organic nutrients mixed with a little soil that I add to the top of each pot. I added 35 grams of BioBloom to each of my pots🌺 (Pot of 7 Liters / 2 gallons) ------------------------------------------------------------ 💧Watering I water all my pots the same day but with more or less water. Simply by lifting them; A light pot is a dry pot and will need more water, A heavy pot is a wet pot and will need less water. On average I water each pot with: Day 29 : 0.5 L Day 33 : 1 L with 0.8 grams of bio enhancer/L I use tap water, adjust the ph to around 6 and water ------------------------------------------------------------ 🔥❄️Temperature of the week : Day : 19-23°C (Humidity : 65-80%) Night : 14-17°C (Humidity : 75-85%) Outside the tent it is around 16°C with 70% humidity The humidity is a little too high, I hope it will drop a little 🙏 ------------------------------------------------------------ 🚀Equipment of the week ⭐️ : Light FC3000 Mars hydro. power 95% at 50cm Extractor 6 inch Mars Hydro. power 1/10. ON 24/24h 2 fans to circulate the air inside the tent. Each on for 30 minutes then off for 1 hour. this rhythm repeats itself in a loop I'm removing my heat mat this week. ------------------------------------------------------------ 📜Links : 🌱Banana Krumble seeds : 👇 https://shop.greenhouseseeds.nl/feminised-cannabis-seeds/usa-genetics/banana-krumble/ Mars Hydro : 5% off with my discount code "houstone5" 💪 https://www.mars-hydro.com/?acc=hou-stone 👨‍🚀My Instagram❤️️: https://www.instagram.com/hou_stone420/ ------------------------------------------------------------ Thanks for your visit😀💚
Likes
20
Share
5/7-D1...beautiful weekend to grow. Each new week will be on Saturday. I will be updating along the way multiple times per week. Giving averages for my conditions. D2-wonderful week of sun is scheduled in the forecast. Lightly misting and keeping the roots moist. A little water every morning should do the trick. Plant is looking healthy otherwise. Not able to care and maintain like my other plants but I'm hoping for an impressive yield without any training techniques. D3-very windy today, avg temp 81f. D4-hot and humid today. Avg temp 80f. Gave a little misting at the base to keep moist. *reached 90f today...woah D6-high of 93 today. Giving the base a good moisten each morning, afternoon and evening, as it has been so so hot D7- misted the base this morning, will continue to moisten when dry. First week down, probably 9 more to go.
Likes
4
Share
@rkomaaa
Follow
On 3 of them I applied LST and Topping On other 3 Toppin only I am aware that they will soon run out of space,which means that I will have to move two of them to another tent...we'll see
Likes
14
Share
Vamos familia tercera semana de vida de estás Punch Pie de RoyalQueenSeeds . Que ganas tengo de ver el progreso de esta variedad, las plantulas están sanas, se ven con buen color. La cantidad de agua cada 48h entre riegos. Esta primera semana ya añadimos nutrientes de la gama Agrobeta. Tuve problemas de trips en un indoor y tengo todas plagadas pero ya las e tratado con aceite de neem y un insecticida genérico, también añadí tiras de color azul para controlarla, trataré esta semana y la siguiente. Trasplanté directamente a macetas de 7 litros. Estas próximas semanas veremos cómo avanzan. Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí todo, Buenos humos 💨💨.
Likes
52
Share
I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"
Likes
158
Share
Standard week turned in to mini dramas at the organic THC garden..... the dog chased one of those little iguanas that live in holes
Processing
Likes
6
Share
@Spazmagi
Follow
10/28 - Pushing this update three days early since much has changed. Did a solution change earlier today to the new mix (as noted) which settled in about 740ppm (570ppm nutrients, 1.14ec + tap). After approximately eight hours (including a dark cycle), she registered 720ppm, but we will see how she swings over the next few days. The other lady in the video was given the same nutrient solution at the same time and is now showing some dark buildup on her roots that this Amnesia XXL Auto doesn't have. Her growth has been fantastic so far and she is responding well to the nutrients. I am excited to see how this goes considering this is my first DWC run and first run with Dyna Gro. Any comments, questions, observations, or concerns are always welcome. Happy Growing! Edit: 10/29 - Added 2ml/gal Botanicare Hydroguard as a preventative for any potential root issues. Edit: 10/31 - Removed two large fan leaves that were actively shading new growth nodes. PPMs have slowly climbed up to 750. Lowered to 700 with pH'ed water. Added second Mars Hydro SP150 and raised to 18" above canopy.
Likes
6
Share
@Ninjabuds
Follow
Everything is looking great for now. Busy week. Check back next week for individual photos of he plants will be starting to be pretty fat by then
Likes
6
Share
The bottom buds were done and getting amber, I thought of partial harvesting but the math didn't match and leaving the main cola didn't make sense so I chopped her down. Will be back 3 weeks after she's dried with the smoke report
Likes
55
Share
@valiotoro
Follow
FBA2507 Light mix finito✔️BANG To the guy behind this strain : THANK YOU it's a one-way to the past when I was harvesting peaches in my grandpa's garden👨🏻‍🌾 Once again the quality of the buds 😳!!! In coco she s huge🚀 Same feeding + Green Sensation RoOoOaAaaADDD I've ever been down👻 Take care 💚
Likes
16
Share
@Hawkbo
Follow
Videos were taken on day 37 of flower. This one has a heavy strawberry aroma and some strange lookin buds. Looks like it will fill in pretty good. It's on the far right of the tent in the videos next to the purple leafed plant.