Week 10 buds keep growing but the girls got some kind of deficiency… it started at the top of the plant … I’m almost done with the blue dream hopefully this don’t mess her up in her last week or weeks.. other than that she’s a big girl !!! The purple dream seems to be doing fine hopefully she don’t end up dying on me before harvest …

Hi growers 👌🏻🍁 This week I’ve had a few slight more issues this run hasn’t been the best so far. But I’m hoping if I can just up my feed as each watering I’m feeding the ppm are only at 450ppm 1ml grow 3ml bloom 2ml top max 4ml heaven 4ml actavira In a 5litre bottle - every 3 days I’ve had a few herm on me - which has been a bit of a disappointing, it just tells me my rooms not dialled in at all. Few more issues to fix next run. All the pink runts autos that finished flowering dried for 1 half weeks then went into canna butter. If anyone can give me a message or comment of anything I can do to try fix these girls I would appreciate it ✌️🏻🍁

******************************************** Growdiaries Grow 22 ******************************************** Welcome to my 22nd grow on growdiaries. I'm going to be stricter on this grow as i have been a bit lax on the last few and let them get out of control. My plan is no more then 12 colas between the 2 plants. I'm going to have a shorter veg period to keep them at a reasonable height. I'm also going to try to keep them away from the sides of the tent more then I normally do. Because I may be going away shortly I'm going to start in the final pot because sods law I'll be away when they need potting up. I'm running 2 photoperiods again, they are both from the MSNL catalogue. Plant #1 Lemon cherry gelato will be on the left looking in the tent and #2 Zoap will be on the right. This diary is focusing on #1 Lemon cherry gelato Nutrients. Ecothrive Neutralise Shogun Katana roots Plagron Terra grow (3-1-2) Plagron Terra Bloom (2-2-4) Plagron green sensation (0-9-10) Plagron power buds (0-0-0) Equipment on Smart plugs. 1. Light= Viparspectra Xs2000 2. Feed= water pump. 3. Extractor= Ac infinity 4. Oscillating fans= 2 on ext. 5. Cameras= 2 on ext. 6. Humidifier= ram 5L 7. Dehumidifier= 2L 8. Radiator= 1KW Tent settings. Light cycle=24/0 Light Power=100W (42%) Photone app has been Calibrated, and I have done a ppfd map over a 40cm×40cm area. Extractor controller settings High temp= 26c Low temp= c Temp step=0c High Rh= 69% Low Rh= % Rh step=0% Speed max=10 Speed min=1 Smart controller settings (during lights on). Radiator on= -20c Radiator off= +21c ******************************************** Germination/Prepwork. ******************************************** 📅1/10/24 Tuesday 📋 Prepared 12L fabric pots, filled with biobizz lightmix, then gave 2L water Ec=0.25 PH=7.0/6.7. Then 1L water with katana roots @5ml/L Ec=0.3 PH=6.3/6.3 No runoff. Placed pot into tent with no light on. 📅2/10/24 Wednesday 📋 Dropped the seed into 40ml of water with 5ml/L katana roots and 0.1ml/L neutralise at 5.00pm. 5.00pm turned light on @ 100w 80cm above the soil, Ppfd=197, 24hr DLI=17.0 10.00pm placed seed into moist paper towel. 📅3/10/24 Thursday 📋 7.30pm tap root breaking through the side of the shell so put the seed into 12L fabric pot, and placed in the tent under constant light. Can't recall ever having a tap root coming through the side before. 📅4/10/24 Friday 📋 9.00pm looks like movement. 📅5/10/24 Saturday 📋 9.00pm not broke ground properly but cotyledons are visible and looks stuck in part of the shell casing. Day 0 ******************************************** Germination summery. 📋 Didn't take that long for the Lemon cherry gelato to start breaking ground, she seems to be struggling to open up at the moment and is a funny yellow colour. I'll give her a few more days and see if I need a backup seed.. Back soon. Take it easy. ********************************************

Day 70 - She grew 5cm / 2" this week! The amount of trichomes she has on her is frankly ridiculous 😍 totally white over. The smell upon touching them is intense Grapefruit 😍 PhenoFinders have done a great job breeding this. I'd like to try more of their range.

Allora.... Questa settimana ha ripreso veramente tanto! La settimana scorsa era rimasta un po' indietro rispetto le sue amiche (diverse genetiche) ma adesso ha veramente dato il suo scatto è ha rivelato che è all'altezza delle sue compagne di crescita! Anche lei sembra che si stia iniziando a riempire bene e ho deciso di togliere qualche internodo centrale per favorire l'areazione ed evitare eventuali sorprese di muffe più in là( anche se non ho mai avuto problemi meglio prevenire che curare)...non vedo l'ora che si inizi a gonfiare un po' perché sono molto curioso di questa genetica! Ha un 29% di THC quindi dovrebbe essere adatta a me .... speriamo bene e incrociamo le dita! Nel frattempo volevo ribadire la potenza di questi prodotti di Cannaboom! Sto usando tutta la linea full cream (con qualche aiuto della linea minerale tipo il loro CALMAG(SI) ) che oltre ad essere un semplice Cal Mag contiene anche silicio e ferro! Veramente adatto a le piante per fare assimilare meglio potassio e fosforo! Credetemi che con solo due applicazioni ho potuto vedere delle differenze esuberanti! Infatti speromtanto di continuare a usare i loro prodotti perché mi stanno veramente aiutando a spaccare questa growbox da 100x100! Quindi ancora grazie a CANNABOOM! Un grande grazie speciale a tutto il team di anesia che mi ha fornito questa splendida nuovissima e potente genetica! Spero che piaccia come uscirà il diario! Ma alla fine ci saranno delle sorprese per tutti quindi rimanete sintonizzati! 💪🏼💪🏼💪🏼💪🏼 Seguitemi anche su Instagram sul mio profilo curati_da_solo🔥🔥🔥🔥

1 week done! Really impressed with how strong she is! Let’s gooo we will keep on pushing forward Time to start the plagron sauce

Use King kola and Terpinator

Orion F1 Liquid Nutrients grow. 31.5.25: Well, this week has been pretty dull 😅 I was hoping to have something to report on by now. I guess maybe next week 🤞 I've just been keeping the pot watered. I watered twice this week, with about 2l of dechlorinated water PH'd to 6.4. Once; I used 1ml/2l of Xpert Nutrients Cal-Mag amino acids, the other watering I used .15Tsp Ecothrive Biosys. ☆ Xpert Nutrients PH down, up to 1ml. ☆ Ecothrive Neutralise 1 drop per litre from the 1ml pipette, which is attached. This is my dechlorinator. I am planning on either topping or FIMing both plants. So I'm hoping that purgatory won't last much longer here 🤞 Quite a boring update, I know, but thanks for stopping by and hanging out! 💚✌️🍃😊🌱

Last run of the growing season. Biscotti Mintz by Barney's Farm. I wasn't satisfied with the last crop's yield so i wanted another crack at it. This time I'm armed with a digital Lux meter so i can better dial in the light without the guesswork. Looking to start the clones off with between 5000 and 7000 LUX at the canopy. But i didn't like the brightness at 8000 so i upped it to 15,000 Lux. I think the 5k to 8k Lux recommendations for clones was for clones in the process of rooting. Recommended Lux values for vegging plants is between 15,000 and 50,000 Lux. They were very lanky with long internodal spacing which I thought might be insufficient lighting. Because the other Biscotti Mintz grows and research i've done, shows a very bushy indica trait growth pattern. So either i have a shitty pheno, or my lighting wasn't good enough. I'm guessing it was the light because preliminary testing with the Lux meter showed that my canopy was quite under lit last run. Again using 3 gallon pots, this time i am crossing my fingers with the substrate because it is reused coco that i washed and buffered myself. I've never done this before so i have no idea what's going to happen. For all i know they will all be dead in a few days lol. Anyways, i tested the coco pH last night, and after buffering with 2x strength calmag and soaking the coco in a 6.0 pH for 48 hours, the pH is sitting around 6.8 in the coco. Not where I wanted it, but it's doable. I believe the coco brand new out of the bag measures at 6.8 so... I will be watering in 6.0 pH to try to achieve a balance. Treating the roots before planting with Azos and dusting the planting hole with Mykos. The nutrient solution is very mild to start off. About 450ppm. Hygrozyme will be added to the mix and watered in to help break down the old dead root matter that wasn't able to be sifted out of the coco. The cellulase will break those roots down into usable food for the plant to uptake, and clean up the dead roots at the same time. Hygroben will also be added because i have some left from the last crop. And after seeing the results of using bacteria, i'm pretty sold on using it. Today is March 4th, 2024. I like to start on the first of the month but i like starting on Monday's better for keeping my weed soaked brain organized a little easier. I'm thinking to do half strength doses 2x per week instead of full doses 1x per week. It's twice the mixing, but that's ok. There will be 7 plants in total, and the experiment i am running this time, for anyone that wants to check out, is 1 of the plants i will do a seriously severe defoliation on while leaving the rest untouched. And we'll see how it plays out yield wise. I'm sure of the outcome already, but I'm tired of the babbling dummies all over the place that preach fan leaves fan leaves... So we shall see! I had the pH of the nutrient solution set to 6.0 but after adding the enzyme and liquid bacteria, the pH dropped to 5.78, so beware of that if you use those products, even though they claim not to affect the pH. The light dimmer is set to 6 of 10. The clip fan is set to 2 of 10. Temps set to 74F and humidity set to 70% humidity. The light is 18 inches from the canopy at a dimmer setting of 6, which gives the canopy 15,000 Lux. Each plant was gently watered with about 300ml of nutrient solution, which was carefully and gently dispensed with a 140CC syringe Hope they like what i've done with the place lol. P.S. I realized that the 5000 to 7000 Lux was for clones that are rooting. So I had the lux at 12,000 at 18 inches from the plants at a dimmer value of 5. I've now upped the dimmer to 6. Tomorrow i'll check the lux and see where it's at. The clones have just come out of the dome today so i don't want to push them too aggressively too fast. MARCH 5, 2024 I just tested the Par light reading on BM #1 and the BM right in the center. BM #1 Par reading is 247. Center plant is 270. Light dimmer is at 6 and light is now 13 inches from plant canopy. MARCH 9, 2024 Fed again today. There is some progress in growth. 1/2 inch increase. The clones have been upset getting adjusted to their new environment. I've upped the dimmer to 7 and the PPFD and DLI numbers are good. Humidity remains set at 70% and temperature is set to trigger the fan at 78F Light remains where it was so the plants have grown 1/2 so the light will be 12 inches above the canopy. Mixed up 2 liters of nutrients and the ppm was 555, and the pH was adjusted to 6.15. 2ml Per liter of hygrozyme and hygroben were also added. Clones have curled leaves and a perky/droopy stature. The leaf edges are browning a little bit. I'm not sure whats happening with them other than it's just the effects of transplanting and drastic environmental change. What i'm wondering is how they will/are reacting to the used coco underneath? We press on with fingers crossed! 🙏😁

Zenzation is fast, very fast, filled and took color quickly and quickly volge at the end. The flowers are full, very full and seem truly succulent, the bassine shape, I spoke many times of the sides that I left then if you want high plants to take advantage of the growboxes in height Make the topping, without LSS and leave only the main line cloning the center. If instead you want a low plant you can leave side that will become very big and do some lst and fimming to keep them low and level them with the center that still weakens. LIGHT >> MARSHYDRO SP3000 AT 100% OF POWER .. TENT >> MARSHYDRO 120x60x180 CHECK IG >> https://www.instagram.com/marshydro_aliexpress2/ Buy >> marshydroled.aliexpress.com TENT >> MARSHYDRO 120x60x180 CHECK IG >> https://www.instagram.com/marshydro_aliexpress2/ Buy >> marshydroled.aliexpress.com

Finally, I found the time to finish the report. Thanks for joining me!

Day 42 : Watering with co2 tab / 5L. Also added food again because i think they need it. Increased ppm to 850. Maybe the next one will be pure water. Ventilation works all the time when lights are on. Temp and humi are stable and this is good for the girls. 6 cm in 3 days. Patience is the key always. Also removed some burned leaves from all ladies. She is beautiful community. Edit (Day 46) : Watering with co2 tab every 5L. I watered with juices again at 850ppm because i felt that they need it. Only DsD drank pure water because of burns. She stopped height grow. Her buds are the most fat. She will be the first chop chop guys. :D :D :D . She is full of crystals.

Loking forward to the bloom part now plant is showing some promise

sticky, tough and smells gr8!

Filling out the trellis net. Looks like another 2-3 weeks until I flip the ladies. Using SST’s, LABS and natural inputs for this grow. I have made some mistakes in the past using Organics, but have figured out HOW to use them for an entire grow. The vegetative state, I have never had a problem with. The transition into the first 3 weeks is when I have had the most issues. After a little research and testing, I finally have a basic blue print of how to feed plants in flower for 10-12 weeks now or shorter. Mark Bowell from Perfect Gardens on YouTube and Mr Canucks Grow from Canada are my largest information inputs. Final Thank you to Mr McGooz for keeping me in the know. 10-11: yes, some of the stalks are turning purple. This is not due to phosphorus, magnesium, or any deficiency. It is due to the light being too intense for the plants. I am at the max distance and running the light at 30% ( it’s a 600 watt 🤣🤣). Soooo yeah, that purple is going to stay for a bit. Purple with other leaf discoloration or senescence IS a problem, purple stems with NO leaf issues isn’t serious issue. Cant it be fixed? We are going to find out….Photosynthesis Plus will be on hand in the next 5-6 days. This permits the plant to USE more of the photons ( yes, I have carbon in my media). This should minimize the purple and allow me to UP THE WATTS 🗣️🗣️ 10-14: spoke to my “guide” and we made the decision to go ahead and flower these ladies. We saw how much stretch there is to be had and realized we are currently filling the trellis by 75%. We are estimating the entire 4x4 area to be completely filled. I defoliated and pruned the smaller sites off the lower areas of the plant. Not quite lollipopping, just selectivity choosing sites to keep and bones that will get in the way. For transition I am using a ratio of 1:1:1 on NPK’s to ease the flip. The ppm’s will be between 750-800. Once we reach early flower, we switch the NPK’s to 1:3:2 ( flower girl by Dr Earth OR Fish bone meal and langbenite). I switch each feeding between the two for 5-6 weeks. At week 7 we switch to 0:3:3 ( seabird guano and Langbeinite) at 500 ppm’s. Week 8 the same feed. Week 9 kelpseaweed/water Only ( these are 10 week cultivars). Thank you for taking the time to read. 10-16 😍😍😍 Plants are starting to show deficiencies!!! Yes, normally one freaks out 😂😂😂 The slight deficiency is a sign that I can go ahead and start: The Flowering Cycle. When using Organics, you have to use your eyes because nothing is specific. Meaning: you have to see when the amendments are running out to A: Top Dress B. Make compost teas. We are going the compost tea route for flower. I made a video showing exactly what I use. The ratio is 5-5-5 ( yes earlier we were going to use 2-2-2, but we found out there is no calcium or magnesium in the all purpose mix by Dr Earth…another reason to learn to read your plants).

…

Well its was not the easiest cycle.I make some mistakes and cant deleaf plants as clean as i want cause scrog.so thats not the highiest result for this strain.