Anesia Seeds - Chimera Cut Our girl is now 112 days from seed and 62 days into flowering. We've trimmed off all the leaves, leaving just the buds, and she looks absolutely stunning. The branches have bent under the weight of the dense, heavy buds, so we've tied them up to prevent any breakage. The time to finish is approaching, but we're not ready to harvest just yet – we still have some time to flush the roots and ensure everything is perfect before the final cut. Throughout the entire grow, we've been using nutrients from Xpert Nutrients, and the results have been incredible – the plant’s structure and bud quality are outstanding.

Giorno 43 - le foglie erano di nuovo giù, fornisco 1lt di acqua a testa Giorno 44 - stanotte alle 3 le foglie erano nuovamente tutte giù, ora sembrano essersi riprese un po’ Giorno 45 - fornisco 1 lt di acqua a testa, le foglie di “CARAMEL” erano di nuovo tutte giù Giorno 46 - credo possa essere una carenza di azoto (N) e fosforo (P), aumento fertilizzanti (2ml/L bio grow, 2ml/L bio bloom, 1ml/L top max) fornisco 0,5L a testa, il terreno era ancora umido dopo l’irrigata di ieri Giorno 47 - la dose di fertilizzanti di ieri sembra sia andata a buon fine, le foglie non sono più tutte giù ma stanno meglio Giorno 48 - nulla di rilevante, la crescita continua, domani irrigherò. Ho comprato un ph tester che non riesco a calibrare, ne comprerò uno con la vite Giorno 49 - le foglie di “Caramel” tendono sempre a stare più giù e ora si stanno ingiallendo notevolmente, fornisco 1 litro d’acqua a testa in irrigazione. Giorno 50 - credo che le foglie gialle di “Caramel” siano dovute da una carenza di fosforo(P)e potassio(K), probabilmente non assimilata perché non controllo il PH

All getting top heavy, had to tie alot of them up. Buds are nice and dense and have taken well to the nutrients in the past few weeks. 2week ripen and flush starting 7/2/21. Nice frosty buds on all of them and my favourite plant still standing out has to be the zkittles OG. On the other hand the do si dos smells like it packs a punch! Update 11/2/21- will be flushing for 5more days then leaving in darkness for 3days before chop.

Okay I'm sorry for the lack of updated I'm now in week 10 half way through the week. I started my flush at the end of week 8. These really put a lot of weight on over the past 2 weeks and there looking on point there due to come down with in next three to five days depending on my preference. This strain is ripper new released strain lemon ice 2.0

purrrrrrrrdy 😍 the scrog turned out beautifully, we are about 10 days into flower! can see the lady parts and the stretch is well under way. the plants are all very healthy and growing vigorously. I did a big manicure yesterday, the pics are one day after manicure. for now the plants have blended into one nice canopy but soon the flowers will distinguish the plants. overall a great week!!! for next weeks update the flowers should be starting to form 😋

I'm in the fade waiting for 30% amber it's taking forever tho, no amber as of yet on any plant also the barneys farm runtz muffin strain hermed on me...😮‍💨also put the runtz muffin in 3days of darkness Friday chopped today Tuesday Sept 5

Pretty normal week, lots of flushing and smell definitely increased Managed to control temps a little better

Finally getting some sugar! They are taking their time. Should be ready after 9-10weeks but I think they need at least 2 weeks more

Typical Green Crack harvest, lot of leaves but easy otherwise Lack of tent space really hurt her yield, guessing 25% less due to it Dry weight for Plenty 322 grams nice easy final trim rock hard nugs Two clones follow The clones nearly identical both weigh in at 710 grams wet in dry yield later Clones yielded 287 grams dry

21 days, pre flowers showing . Increased dose of Bio grow ( nitrogen) used , increasing water slowly

Day-43. Girls looking good. Still in the transition. One of the StarD girls has really had a growth spurt. Using next to no nutrients. 02/05/18-Day 48- Very pleased with fast buds, my first AUTO grow and they are taking off a treat, much easier to grow than photoperiods. But then again I treat them similar in terms of just defoliating as normal and LST'ing. Probably a little bit more sensitive to nutrients.

Week 14 (17-10 to 23-10) 17-10 Temperature: 23.4 degrees (lights on) 17.5 degrees (lights off) Humidity: 70% (highest) 55% (lowest) Watering: 400 ml. PH 6.5 EC: 0.6 (without Hybrids & PK+) 18-10 Temperature: 23.6 degrees (lights on) 17.1 degrees (lights off) Humidity: 70% (highest) 54% (lowest) Watering: 900 ml. PH 6.5 EC: 0.6 (without Hybrids & PK+) 19-10 Temperature: 24.3 degrees (lights on) 17.8 degrees (lights off) Humidity: 81% (highest) 59% (lowest) Watering: 1210 ml. PH 6.5 EC: 1.7 (with Hybrids & PK+) 20-10 Temperature: 25.1 degrees (lights on) 18.2 degrees (lights off) Humidity: 84% (highest) 62% (lowest) Watering: None. 21-10 Temperature: 25.6 degrees (lights on) 18.6 degrees (lights off) Humidity: 99% (highest) 64% (lowest) Watering: 1200 ml. PH 6.5 EC: 0.6 (without Hybrids & PK+) 22-10 Temperature: 25.8 degrees (lights on) 19.3 degrees (lights off) Humidity: 89% (highest) 63% (lowest) Watering: None. 23-10 Temperature: 25.7 degrees (lights on) 19.1 degrees (lights off) Humidity: 89% (highest) 60% (lowest) Watering: 1000 ml. PH 6.5 EC: 1.7 (with Hybrids & PK+)

The little one grows well and in good health, it is only a little smaller than what we imagined and other little sisters who are in the same conditions. We tried an inexperienced hst on a side branch to see what happens. We spray neem solution + potassium soap every 3 days for protection and lord grow nourishing foliar every 15 days for leaf nutrition and co2 protection.

Auto Purple Hulk Auto by MSNL Outside 👉Sponsored Grow👈 W5F1 The weather was rainy with thunderstorms early in the week becoming hot, humid and overcast. I only got to fertilize once this week but with the super soil she doesn’t show any deficiencies. I fertilized with I49 grow 1 tbsp/gal & 2 tbsp I49 Flower. I added this more as a preventive measure since I’m seeing issues with AK-47xl also outside in super soil. With the extreme heat and rain, my purple hulk is a HULK. She almost doubled height (grew 15 inches) this week and is now 33 inches tall and starting flower. She demonstrates resistance to fungal diseases and bug damage. In the background noise on the video is Cicadas. When they hatch, they crawl onto a tree or plant and molt. The adult has wings. This is the empty body casing. This year there are some but not a lot as in many years of their 17-year cycle. As always, thank you all for stopping by, for the likes and most of all growers’ love and support. Stay green, growers love 💚🌿 💫Natrona💫

I THINK THERE IS PRE-FLOWER PERIOD, WHO AGREE AND WHOS NOT ;D

Last week of pre flower girls are doing great can’t believe they’re clones

Hello everyone, all good for this week 😎 They grow fast and with a beautiful green colour on the leaves! In this grow i will be testing out Plagron Nutrients and Spider Farmer SE7000 Strawberry Gorilla from Fast Buds 🍓🦍

hi, one more week, except for the lack of control in height due to the sativa phenotypes and a couple of plants that show some virosis. Everything is going well, good smell and plenty of resin. we're about halfway through the flowering cycle now! greetings.

Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?

Week 5 day 36F FLUSHING Using advanced nutrients flawless finish and 2gal PhD water to flush. Every 2/3days when soil is dry. Starting now with 2 days darkness. Still in awe with this pheno, the colours, density, smell are all beautiful on this plant 👌💚 😂👉In the video check toward the end when I zoom in on crown bud, I'm high as sh right now and it looks like a smiley face 😁🤣 saying 2more days mofo and we ready 💪💪💚 Thanks for following I'll be back with the chop in 2-3 days 😱😂💚