Likes
5
Share
@Aranseed
Follow
Recién comenzando con automáticas ¿Una perdida de tiempo? Para muchos tirar automáticas es una perdida de tiempo y esfuerzo dada la facilidad con la que se estresan, sin embargo, no puedes esperar una producción superior sin hacer un cuidado adecuado. En este diario veremos que tan cierto es esto. Importante, no estoy afirmando bajo ningún caso que una semilla automática supera en producción a una feminizada, sin embargo, muchos afirman que la producción, el esfuerzo y el resultado de una semilla automática no se compensa para nada, sin embargo hay cultivadores que en dos meses consiguen producciones muy generosas de una planta automática . ¿Cuál es el secreto? Estrés... Lamentablemente son muy sensibles al estrés, pero si logramos controlar eso, deberíamos tener un resultado de otro nivel (El cual espero quede en evidencia en este diario). Sin mas que decir, los tendré al tanto de los avances de estas niñas
Likes
23
Share
@Kakui
Follow
V23, riego pH 6.2 y EC 1.5, se realizó una pequeña defoliación y Lollipop, las plantas están mejor que nunca, creciendo al ritmo esperado y hojas apuntando hacia la luz, cómo "rezando al cielo" mostrando fotosíntesis al máximo, plantas felices. V24, se realizó LST a las ramas con buen crecimiento. He notado que son más difíciles de entrenar, son algo más duros los tallos, por lo que les hice un pequeño masaje antes de doblarlas para evitar que se rompan.
Likes
6
Share
@rvabudman
Follow
Graduated, and am off from work for a few weeks, so went overboard on photos. Plant is doing well, leaves are starting to turn yellow (strain trait). Can't wait for the harvest and being able legally gift my xmas ornaments to my cousins during our "cousins walk" at our family xmas party.
Likes
11
Share
@valiotoro
Follow
Everything’s going smooth, just like her little sister! Flipped to 12/12 yesterday. Got a few cacti in bloom too, figured it was the perfect time to throw them in with the Tropicana for that desert vibe.
Likes
38
Share
@Aedaone
Follow
We're starting off this week with more thunderstorms. They will only be for the first two days of the week. This week is much cooler. The rain kept me from feeding my generative one formula nutrients with their water. On day 2 these are still feeding on the 800ml of coop poop 2-4-3 I top dressed with. They are nice and green and the centers are showing it was a little hot but it should grow out of that in a day or two. Day 5 of this week. Everything grew into the fertilizer. Buds are stacking and trichromes are beginning to show on the leaves. The smell is very noticeable now. The #1 plant has a smokey cheese smell. The #2 plant is skunky and sweet but more skunky. The #3 plant is a little behind the other two and isn't really putting off any distinct smell yet. Day 7 I'm starting to see trichromes
Likes
37
Share
As of day 63, the Blue Dream'Matic is bulking up well and getting closer to what may be a really great harvest. The smell off the plant has gotten unreal, both powerfully sweet and distinctly of blueberry. The buds are completely frosted with trichomes, and some of the pistils are turning orange, so the plant is getting closer to harvest by the day. I am sticking with this current nutrient profile until the final few days of ripening when I will run extra enzymes and perform a short flush. Thanks for reading!
Likes
8
Share
@Donwon310
Follow
266 grams out of all 4 plants, roughly over half elbow. Went with grove bags. Did 5 day dry then put into totes for few days and bagged after trimmed. Sticky buds with the piney nose to it with heavy gas .
Likes
22
Share
@Rangaku
Follow
Looking nice and healthy, starting nutes now and trying to keep the humidity up
Likes
23
Share
@Athos_GD
Follow
Strain was easy to grow. Had some herms but since I only have 2 plants I was able to pinch the balls off. Buds have no seeds and are a strong smoke. Really hits the lungs.
Likes
4
Share
Lief alles gut, ein paar stehen noch, somit werde ich noch was nach Posten.
Likes
241
Share
💩Holy Crap We Are Back At It And Loving It💩 Growmies we are at DAY 21 and she's just killing💀it👌 So Shit , I gave them just a tad to much nutes 👈 But I have since fixed it So I'm starting to pull her over and do some low stress training 🙃 Lights being readjusted and chart updated .........👍rain water to be used entire growth👈 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14 NutriNPK Grow 28-14-14 NutriNPK Bloom 8-20-30 NutriNPK Bloom Booster 0-52-34 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈
Likes
6
Share
@CalGonJim
Follow
1/12/26 4:18AM MONDAY.....💪💪💪💪👌 1/12 CANNAKAN DAY MEDICINAL SLAVERY WOULD MAKE HARVEST A BREEZE!! ABOUT THE LEDS Yes, the **Samsung LM301H EVO diodes** in your Mars Hydro lights (likely an FC-E series like FC-E3000, FC-E4000, or similar) are among the most efficient horticultural LEDs available right now—individual diodes hit **3.14 μmol/J** efficacy, pushing the whole fixture to around **2.85–2.9 μmol/J** PPE (photosynthetic photon efficacy) in manufacturer specs and independent tests. That's top-tier for full-spectrum grow lights, meaning they convert more electrical power into usable plant photons than older diodes or cheaper LEDs. If they "seem more efficient than the PPFD meter says" (your plants thriving at lower wattage/height adjustments), that's actually common and not a contradiction—it's often the **real-world efficiency** shining through once nutes/stress are fixed. Here's why this happens and what your recent wattage drop (a few more watts lower) likely means: ### Why Samsung LM301H EVO Can "Seem" More Efficient Than Raw PPFD Readings Suggest - **High PPE + Uniform Distribution**: These diodes excel at producing photons in the PAR range (400–700nm) with minimal waste (heat/loss). Mars Hydro FC-EVOs achieve strong average PPFD (e.g., 750–1000+ μmol/m²/s in tests at recommended heights/power) with even spread—no hot spots wasting energy. When your nutes were suboptimal (Advanced Nutrients issues), plants couldn't fully use the light (wasted photons → stress, stretch, lower efficiency). Now dialed in (GH powder + aminos + mycos), they convert more of that PPFD into growth—making the light "feel" stronger/more efficient even if meter numbers stay the same or drop slightly. - **Meter Limitations & Calibration**: - Handheld PAR meters (especially cheap/older ones) can under-read full-spectrum LEDs like LM301H EVO (strong white + red enhancement). They often have poor spectral response to the exact mix, reading 10–30% low compared to pro tools (Apogee SQ-500) or calibrated apps. - If you're using an app like Photone (mentioned in your diary), it's generally more accurate for Samsung full-spectrum lights (especially on iPhone; Android varies but often close with diffuser/paper). Many growers report Photone matching or exceeding cheap handhelds on LM301H setups—sometimes showing higher effective PPFD than a basic meter implies. - Bottom line: Your plants are the ultimate meter. Thriving (miraculous growth, no burn/stress) at lower wattage means the effective usable PPFD is higher than a potentially under-reading meter suggests—efficiency win. ### Your Wattage Drop & What It Means Lowering by a few more watts (on top of the earlier ~10% drop) is smart and aligns with the efficiency gains: - Dimming on Mars Hydro FC series is **very linear**—tests show PPFD percentage tracks close to (or slightly above) the dimmer % because diodes run more efficiently at lower currents (less heat/loss). - Example: Dropping from 100% to 90% might only reduce PPFD by ~8–10%, not full 10%, due to that efficiency curve. - Your plants handling it (still "miraculously better") without stretch or pale leaves confirms the sweet spot: likely 450–650 μmol/m²/s veg/late veg range now, with room to push if pistils emerge. - Solar bonus: Every watt saved = less battery drain on cloudy days, cooler tent (less fan/AC draw), and more headroom for extra plants without spiking consumption. **Practical next steps**: - Recheck PPFD (if using Photone/handheld): Average multiple canopy spots at current height/power—aim 450–600 for late veg autos, 600–800 early flower. - Watch response: If nodes stay tight/dark green/no cupping, you can drop another 5% or lower height slightly for denser canopy. - Log kWh if your inverter shows it—track the drop to celebrate the savings. - If meter still "under-says" vs. plant performance, trust the plants more—Samsung EVOs are proven beasts when the rest of the grow is dialed. This is textbook optimization: nute fix → better photon use → lower power for same/better results → solar efficiency skyrockets. You're building a truly lean system. How low are you at now (e.g., 70–75W total?)? Any pistils or new growth explosions today? Keep the momentum—it's paying off big. 🥊🍌👨‍🔬🚨🌞💪💪💪💪💪 1/15/26 12:36AM L-Phenylalanine: https://pubchem.ncbi.nlm.nih.gov/compound/L-Phenylalanine#section=Crystal-Structures That’s your Mars Hydro bar-style LED grow light setup in a compact grow tent (looks like a 2x2 or similar Spider Farmer tent branding on the mylar walls), running super efficiently right now! Breaking down what I see from the photos: • The light is a multi-bar LED fixture (probably from Mars Hydro’s FC series, like FC3000, FC4000, or a smaller EVO variant) with Samsung LM301H (or similar LM301B/H EVO) diodes—these are high-end, efficient chips known for uniform distribution, low heat, and great full-spectrum output (warm white + red/IR boosts for veg/flower). • It’s hung at 19 inches (measured from the light bars to the canopy or sensor plane, with that white dotted line marker). The tent shows a hygrometer/thermometer combo reading 76°F / 53% RH (nice stable veg conditions—cooler side helps prevent stretch). • Your PAR meter app is showing 327 μmol/m²/s PPFD (Photosynthetic Photon Flux Density) at that spot/height—solid reading for where you’re at. • Plants look like young cannabis in veg stage: multiple small pots (fabric or repurposed buckets like Krøger cottage cheese tubs—classic budget move!), healthy green canopy with some colorful accents (maybe early purpling or strain traits), topped or in early training, sitting in coco coir or similar media. • Power draw: ~50W current (from the energy usage screenshot), averaging super low over time (0.48–0.76 kWh daily average). That’s impressively efficient—likely dimmed way down or a lower-wattage model (e.g., 150–300W rated, but running at partial power). Total consumption over 30 days at ~14.5 kWh is pennies on the electric bill. This aligns perfectly with your earlier plan to target ~500 PPFD but getting great results at lower wattage/intensity. Right now at 19” and 327 PPFD: • That’s in the sweet spot for early-mid vegetative stage cannabis (typical recs: 300–600 μmol/m²/s for veg, starting lower ~300–400 for young plants to avoid stress, ramping up as they bush out). • Bar-style lights like this excel at even spread (no hot center like older quantum boards), so your canopy is getting consistent light without bleaching or stretch in spots. • Low power (49.6W) means minimal heat buildup—fans and passive cooling handle it easily, keeping temps/RH dialed (76°F/53% is golden for veg; prevents mold and encourages compact growth). Why it feels “great results at lower than recommended”: • Samsung diodes are top-tier efficient (often 2.8–3.1 μmol/J), so you hit usable PPFD without cranking full power. • Many Mars Hydro FC models recommend 18–24” for veg at 50–75% dim (your 19” fits right in). • Your plants are responding well—lush, no obvious deficiencies/stress, and you’re feeling physically ready to top/fill pots after the delay. To push toward your 500 PPFD goal without overdoing it: • Lower the light a few inches (try 16–18”) incrementally—PPFD scales roughly with the inverse square law, so dropping height boosts intensity noticeably (could jump 20–50% depending on spread). • Or bump dimmer % if it’s not maxed (your 50W draw suggests plenty of headroom). • Retest PPFD at multiple canopy spots for average (center often higher, edges lower in bars). • Watch for tacoing/upward leaf curl (too much light) or stretch (too little). This setup is dialed for low-energy, healthy veg growth—perfect for your “lower wattage wins” approach. Plants are happy, tent’s stable, and you’re crushing it efficiency-wise. If you drop the height or dim up, snap another meter reading/pic—I can help fine-tune further. How old are these ladies (weeks from seed/clone)? Any specific strain notes, or planning to flip to flower soon? Keep the momentum—today’s a win! 🌱💪😂
Likes
2
Share
Diese Woche wird die Pflanze getoppt und die Seitentriebe runtergebunden. Außerdem habe ich das Substrat noch mit etwas wieder aufbereitetem Coco aufgefüllt.
Likes
11
Share
Got about 215g but i have been smoking for a month. Gorilla Glue = 120g N.L. Blue 1 = 55g N.L. Blue 2 = 40g
Likes
13
Share
Unfortunate Week... Honey cream had a couple of "budrot" spots forming due to droplets of water dripping into the flower and not drying (99%humidity nights)... Thankfully those buds were cut down and she doesn't seem to be producing any more "budrot".. Apart from that, the smell is amazing on her. Power Flower is going nicely too, but seems to not have too much smell...
Likes
4
Share
@Bncgrower
Follow
Another week almost over, the girls are beautiful and smell great. Apparently everything is under control, I'm really looking forward to the results. Happy growing! 🌱🌱🌱
Likes
26
Share
Aspettando la germinazione della seconda gorilla Zkittlez che sono sicuro uscirà presto, il resto perfetto, a breve le metterò in terra sotto a un buon sole 19/05 anche l'ultimo seme di gorilla Zkittlez è uscito allo scoperto! Si parte alla grande per ora!