Likes
Comments
Share
@BLAZED
Follow
Week 4 (8-7 to 14-7) 8-7 Temps: 20.7 to 26.1 degrees Humidity: 49% to 57% 9-7 Temps: 22.2 to 27.5 degrees Humidity: 52% to 65% 10-7 Temps: 22.8 to 27.4 degrees Humidity: 51% to 65% 11-7 Temps: 22.2 to 25.9 degrees Humidity: 47% to 56% 12-7 Temps: 19.9 to 25.9 degrees Humidity: 47% to 62% Watering: Both 1000 ml. 13-7 Temps: 19.9 to 25.1 degrees Humidity: 47% to 60% 14-7 Temps: 19.9 to 26.6 degrees Humidity: 45% to 60% Watering: Both 1000 ml. Today i topped both plants! Light set to 60% strength with a distance of 60 cm.
Likes
410
Share
CANADA DAY UPDATE🇨🇦 THE TRAGICALLY HIP🤘🥁🎸🇨🇦 MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛
Likes
8
Share
@ProKush27
Follow
Over the last week I’ve continued with defoliation process and I removed downer leaves that were not developing properly. On day 78 I added support for aide branches on B and C. I started flush of plant C on day 80, so we’ll see how she looks. I keep feeding other plants but I will be starting flush soon. 😎
Likes
16
Share
@Cauli
Follow
Week 5 already of Guava. She finally reached a good size and the first pistils started to show. Very excited about her stretching and the growth in the next weeks. Had some aphids this week, but spotted them early and could just remove them (about five or six only). So far no new are visible, but will watch closely.
Likes
9
Share
Growth Stage: Early Flower / Stretch Environment: Temperature: ~26 °C Humidity: ~60 % RH Light intensity: increased to ~850 PPFD. ☀️ Watering / Feeding: Watered every 2–3 days, based on pot weight, using RO water + CalMag. 💧 During this week, the plants received 1x BioTabs Bio PK. Observations: Stretch continued clearly during Week 5. Apricot #2 stretched even more and is now definitively the tallest plant in the tent. Apricot #1 stretched more moderately. To balance the canopy, #1 was placed on a crate so both plants now sit at roughly the same height. 🙂 The first pistils became clearly visible at the forming bud sites, marking the transition into proper flowering. 🌸 Both plants look vital and healthy overall. Leaf posture is mostly neutral, although #2 still shows slightly drooping tips, which remained stable. Notes: Week 5 represents the overlap between stretch and early bud initiation. With increased PPFD and the first Bio PK application, the plants are now fully entering the flowering phase. 🌱💪
Processing
Likes
45
Share
@SupaDank
Follow
End of day 35 flower Had an issue with cal/mag deficiency with the White Widow so I had to flush her and increase cal/mag to 5ml/gal. So she should be back on track to produce fatter buds. Royal Gorilla isn't fattening up so hopefully she will this coming week. Also gave her a good flush with some florakleen. Defloiated so the buds on the bottom can get more light. Thanks for taking the time to check on my grow. Peace out!!
Likes
1
Share
@Randomjcb
Follow
Did a 15 week veg while brought 3autos to end then fliped 12/12 about a week ago lovely plant easy to grow so far and loves the feed
Likes
7
Share
@PCGrows
Follow
This is more preflower week, bud sites emerged bud plant is hasn’t quite stretched yet. This’ll be the week she gets y’all or I know my pots are a little too big and she’s working to much on root growth those first weeks
Likes
47
Share
Buenas Compañeros! Semana 8 de Floracion! Llegamos al final. METEMOS MACHETE a este magnífico cultivo mix organico que a resultado ser súper divertido. Al final ha salido una buena cosecha. Jejeje 💚🌲🔥🌱 Esta última semana hemos tenido las luces máximo con unos 55000 lúmenes y unos 850ppfd y se ha notado El impulso final de tricomas Esta semana aprovechamos para terminar de limpiar las raíces para ello usamos Clean, Growzime y agrobacterias para terminar de apurar ese exceso de sales. Hemos ido con una Ec de 0.4 y un pH 6.5 Todo ello proporcionado por la gama de abonos @GreenBuzzNutrients Hemos cortado 8 plantas de 9.. Una Purple og Punch viene más tardía.. la voy a poner en otro armario y la dejaré minimo 2 semanas más Os dejo fotos de la cosecha. Espero que os gusten.. en breves subo la cata y fotos de la hierba seca Un placer y muchas gracias por todas vuestras visitas y apoyo 🌱💚👍🏻😘🤝🏻🍀
Likes
16
Share
@Hempcules
Follow
WEEK 7 It was a good week for my plant. It settled in nicely in the new large pot and has gained quite a bit of volume. For me, this is now a solid foundation to start the flowering phase. Other than that, I didn’t do much this week — just one round of feeding with the additional nutrients, and shortly after repotting I used the Boomboom Spray again. Now I’ll set the lights to 12 hours and send the plant into the flowering phase. I’m already excited. PPFD: 450µmol/m²/s Water: 1x water, 1x nutrient solution With this code, you will receive a 20% discount on your next Zamnesia order: ZAMMIGROW2024
Likes
8
Share
Estas niñas dieron un “estirón” bien bueno. Después de que empezamos a subir la dosis de alimento se noto el crecimiento vegetal más acelerado. Además aplicamos king crab ( bacterias de greatwithemyco) para potenciar el desarrollo de raíces ! Y se nota 👌🏻 Ya están con un pan de raíces bien fuertes por lo tanto, se van de trasplante a maceta de 7L.
Likes
18
Share
@Canna96
Follow
Hey now, hope everyone is having a great weekend and staying safe. Another great week for the ladies, as they are now about 3 weeks into flower, and the stretch has just finished. I am still feeding them silica, cal mag, and flower nutrients maxi bloom by GHE. I did start to add a PK booster this week pushing the EC up to 1.4. I also will be switched the light from V1 to the F1 Spectrum at the beginning of this week, and will be integrating the UV/IR bar into the light cycle later this week. I will run the UV/IR bar for approximately 30 minutes prior to lights off to get started. The tallest plants are the Sundae Driver and the Durban Nights at 42" and the Red Hot Cookies is the shortest plant at 38" however they all look happy and healthy and capable of easily giving up a half pound each. The 5X5 is really starting to fill up nicely, I am running two dehumidifiers outside of the tent and I am able to maintain around 50% RH in the tent during lights on, and around 55% RH with lights off. We did get an unexpected heat wave this weekend and it has been a struggle keeping the heat and humidity down but the flowers are just starting so no need to worry about mold or anything like that yet. As soon as this heat wave is over the temps should be good to go the rest of the way this is by far the best time of year to be flowering plants in my region. I did defoliate twice this week and I may do one or two more rounds before just letting them do their thing. Not much to do from here on out except make sure the reservoir is full and the PH is in the proper range. I hope everyone has a great weekend, Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled
Likes
31
Share
@Tweak
Follow
Got the screen on her late last week, now it’s a waiting game. She’s growing really fast for only being 5 weeks old. Let’s grow baby!
Likes
8
Share
Been a good week explosive growth first signs off early stages of flower few plants come out with spotting and few yellow leafs tent is starting to get cramped tried to spread um out as even as possible with the space we have , first dose of nutrients solo soil nutes we’ve gone with as recommended by the local grow shop
Processing
Likes
65
Share
Was a smooth week. Did a flush and fresh nutrients. Kept the nutrient dose the same since everyone looks happy. Started training and trimmed a few leaves and branches off. I plan to switch them to flower after week 5. Will probably top this one again since she is growing pretty fast. Still pumping nutrients 24 hours.
Likes
5
Share
@Kinghaze
Follow
First week of 12/12 You can see the buds forming now The blueberry cupcake is stretching wild In comparison with the blue zushi. I also put in the dehumidifier and set it on 65% If the cupcake gets too high I'll just add the second trellis earlier.
Likes
46
Share
@Smokwiri
Follow
Welcome to week 5 of my Bubblegum XL diary Genetics by: Royal Queen seeds Looks great, nice and dark leaf, i like the new smaller leaves, the bubblegum leaves edges remind me of the weel on an automated saw. Kinda cute. I think i will let it grow for another week to get a bit wider plant
Likes
296
Share
@Ju_Bps
Follow
For this grow I've used, For the growth 1 Mars Hydro FC3000 (300 W) 2 fan 15w 1 Mars Hydro 6" Carbon Filter + Extractor 1 120x60x150 tent 1 timer 11l pot 22 Hours On, 4 hours off light For the soil I've used plagron light mix For the Flowering 1 Mars Hydro FC 3000 (300W) 2 fan 15w Mars Hydro 6" Extractor + Filter 1 120X60X150 Tent 1 timer 11l pot 20/24 lamp Plagron batmix for soil After harvest, I've put the stuff in a room with 1 fan 15
Likes
14
Share
We have reached the harvests of our wonderful Sticky Beast Automatic from Zamnesia. They are two very very beautiful plants and for this reason I separate the harvests in the last two weeks of the day but they were harvested more or less simultaneously on day 73 and 74. This one I am showing you is the Sticku Beast Automatic phenotype distinctly Bubble Gum in appearance and smell. After all, Bubble Gum is there at the forefront of the plant's genetic line and is a late 90's masterpiece that I adore. This strain immediately shows that it is worth its fame. Everyone speaks highly of this plant, it has won awards and now we know why: grown in ideal conditions it is pure TNT from all points of view, quality of the flower, resin, quantity of the harvest, strong taste evident and recognizable in all pheno, fantastic. This one has produced really a lot of grass, wet it was only 380 grams, we will always be on a plant that will dry us 80-90 grams of buds all very good. Very very bodies, plant about 110 cm tall, the main cola is very nice and hard rocky style as we like it. // AWARD WINNING STRAIN // First Prize at Autoflowering Highlife CUP 2018 --- Get a seed of this amazing strain --- https://www.zamnesia.io/it/3331-zamnesia-seeds-sticky-beast-automatic-femminizzato.html The fertilizer kits that you can find on the Zamnesia website are perfect for this purpose, there is everything. Choose them based on their mineral/organic composition and the soil you have chosen. The plant has eaten the 100% Organic feeding of Plagron: Alga Grow and Alga Bloom as basic nutrients, the rooting Power Roots, the amino acids of Sugar Royal, the Enzymes of Pure Zym that eat the dead parts in the soil, Power Buds that always gives us immense satisfaction with rapidity of start of flowering and composition of the buds, the legendary Green Sensation that now needs no introduction, a name a guarantee. Also the foliar Vita Race used for the first time with success. The fertilizer kits that you can find on the Zamnesia website are perfect for this purpose, there is everything. Choose them based on their mineral/organic composition and the soil you have chosen. at the link --- https://www.zamnesia.io/it/11457-plagron-easy-pack-natural.html The quantity was measured using the sheet prepared on purpose on the Plagron website based on the soil chosen: Plagron Pro Mix + Perlite. at the link --- https://plagron.com/en The growbox is the DS120w by Secret Jardin as well as the DF16 ventilation system and all the fans at the link --- https://www.secretjardin.com/it/ The light was supplied in the past by Viparspectra and it went crazy but it came back to me to produce very well too... at the link --- https://www.viparspectra.com A fantastic selection of seeds, a headshop and a selection of exceptional accessories on the world of cannabis, many other things about mushrooms, health, well-being and all the beautiful things that nature offers only on the Zamnesia website at the link --- www.zamnesia.com Instagram ---- @zam.nesia - @zamnesiawebshop - @zamnesia_usa - @bread_n_buds