Very bad news. I was out of home for 5 days. She streched way too much more than i had expected. The mainstem wich was the tallest is gone completely. She touched the light It was burnt. Now at day 51 i trimmed the burnt areas. I see she is little bit hungry and i see a lot more flowers. I was gonna be very very happy if she didnt touch the light. Anyways i still think she has potential. I ordered new lights they will arrive theese days.

All good, Flowertime

The holiday season got away from me a bit and prevented me from getting an update in on Monday but the plants are _really_ taking off. There are now visible bud sites and plenty of them. *Full Disclosure*: I've significantly upgraded my light in my flower tent from a Spider Farmer SF-2000 to a Spider Farmer SF-4000 and, as such, I'll likely see my yield take off quite a bit this grow. It's certainly having an impact on the heat in the tent and, subsequently, the amount of time the in-line fan is running; that being said, the plants appear to be responding quite well! The last two grows I've run have fallen off hard (complete and total yellowing/chlorosis and drying out regardless of consistent watering/light/nutes/pH) around week five of flower and, with that in mind, I'm trying to keep this grow as simple as possible. I'm purposely using no advanced grow techniques where I'd usually top, LST, and HST. The only "advanced" technique I'm using is a bit of defoliation but this is mainly just to avoid some of the dense bottom growth that tends to decrease air flow, increase humidity, and take away from more rewarding top-growth. This week, along with replenishing nutrients, I've fully emptied out and cleaned my reservoir. While doing so, I noticed a fair amount of red-ish algae growth which I'll likely address with more consistent cleaning of the reservoir and some sort of additive (I'd welcome any suggestions and dosage if you've got any suggestions). All in all, great progress.

This lady is a beast, such a big bush full of flowers, very sweet aroma, I can't find the cherry notes yet but it's very very sweet, I love this strain, all of them have the same smell, and this pheno is just amazing, very strong and for what I can see very productive too 😍🌱❄️🍪

Ultima semana me parece.. ya hemos aplicado flawless y luego solo agua, una cookies ya quedó re colorida hermosa. Las otras dos les cuesta un poco mas porq tenian el ec ree alto.

Some explosive growth This week. She has calmed down on the drinking a little. The ph has stayed pretty level between 5.6 to 5.8 all week. Pistols are really starting to make an appearance. This will be the last week she gets the transition set of nutrients. I added another 450w viparspectra for flower. Sorry about some of the darker pics I got home right as the lights went out tonight. The smell is still light not heavy at all. She filled the scrog well. I am so surprised at how well this plant is doing now it’s like nothing ever happened. Plant got about 17 hours of dark yesterday do to my power going out cause someone hit a telephone pole in the neighborhood..... back on schedule today and we are at day 13 of flip. According to breeder we have about 8 more weeks to go. I’m no expert but I think she is done stretching (i think)..... I can say as a beginner grower this is an excellent strain so far for my level of experience. Been a little cold at night here but so far no issues

I think 2 or 3 other weeks. 😋. I hope they will became a little dense these days

15/10 - Bit of defoliation to open her up and remove some stacked leaves. Didnt take a whole lot but its made a decent difference. I think that'll be the last cut before harvest bar a few which have been hit by the cal lock. Next grow I need to figure out how to access the back of the tent, because at the moment its impossible without fucking my back up and craning my neck. Got would I could back there but could def be better. Topped up with plain water as shes drank 10l over the last 2 days. Not seeing any more rust spots forming so hopefully the cal lockout is fixed. Shes starting to smell quite strong with notes of citrus and shes sticky as hell. 17/10 - EC plummeting again, 10l drank over 2 days. Topped up with water and 3ml CalMag, 5ml Grow, 10ml Bloom added. 18/10 - PH has remained stable overnight after the top up. I ended up doing quite a bit of defoliation today, again opening her up and removing problematic or shaded leaves. Always amazes me how much plant matter can be removed and yet she still ends up looking super dense. 20/10 - Full res change. 5ml CalMag 10ml Micro 5Ml Grow 45Ml Bloom. 1.15EC 6.1PH. 21/10 - PH dropping much more slowly now, so in a good spot. Continuing to take the odd leaf here and there to help light penetrate and get them off bud sites.

We are at 27 days of flowering now and they are starting to change colors now. The gorilla is really turning yellow. I could of gave her a bit of nitrogen but this is just a practice run with my custom bred seeds so I'm letting it go. Alot of frost showing now. They are loving the new fc4800 and 8x8 Grow Tent for sure🤘 another couple weeks and I should know more about the smell of them. Right now they smell more like the nuken but they are slowly changing to have their own unique smell. None of them smell like what the parents did. Except at the beginning of getting frosty they all kinda smelt like nuken. Like marshmallows. The monkey dough nuken smells like fruit loops and the gorilla smells like skittles. More than the original skittles does👍 WWW.MARS-HYDRO.COM PROMO CODE: rocknroll Instagram: @marshydropenny Shout out and thanks to: https://greenbuzzliquids.com/ #greenbuzzliquids @GreenBuzzLiquids Hers more information on the mars hydro products: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 WWW.mars-hydro.com PROMO CODE:rocknroll Instagram: @marshydropenny https://greenbuzzliquids.com/ #greenbuzzliquids @GreenBuzzLiquids Please check out my YouTube👍 Like and subscribe right Now!!! LoL

January 27th: Not much to say. They're about done and smelling delicious. The dry room is set up and ready. I'm excited to harvest it, after all the nonsense this cycle went through.

Day 50. They are flowering !!! Plant A is taller and starting to run !!! Drop her down a bit and raised plant B to keep even canopy. Yesterday they got nute blast, close to 850 ppm. Planing plain water and one more heavy feed this week. Trimmed bottoms a bit, few sucker branches and few leaves gone. Happy Growing !!!

The Plant is getting very bushy and I am thinking of dedefoliating the plant but I am unsure because of it being an Autoflower in the early stages.

MIMOSA by ROYAL QUEEN SEEDS Week #14 Overall Week #13 Veg This week no real issues to report the sun did get to her a little bit had to move her to a new location other than that she's a strong plant to grow she's one that can take some heat. Stay Growing!!

Hi everyone, brothers farmers Welcome to a new week in the PeakyPlansters gardens. I invite you to follow all my friends from Instagram even if you like ... I hope the contents like you .... Feel free to leave a comment

This plant grew 5 inches this week!! @Divineseeds says that this Candy Auto should reach heights of 100-120 cm, so we are off to a good start. In addition, Candy Auto grew remarkable well even though we had a terrible rain storm and hot/humid weather. The dog days of summer are upon us. When I looked up Candy Auto on the Divine Seeds Website, it states, "Thick growth on the sides of plants makes a for higher productivity..." If you look really close at the pictures I loaded, you can see that there is a lot of growth under the leaves. As of today, it looks like this plant is going to do BIG things. Another interesting fact about this plant is "Auto Candy buds possess medicinal properties: their moderate effect kills off depression and irritation, nausea, insomnia, muscular spasms-like a velvet medicine!" @AdvanceNutrients Jungle Juice Grow is what I am using exclusively for this grow. Comments are appreciated and let's chat it up!!

26.1.25: I have had a mistake 😕 i spilt some Fish Mix as I was experimenting with a syphon from some aquarium tubing I have. Unfortunately, I forgot to take the syphon out! Ugh 😣 However, it is fish emulsion and very thick consistency. Therefore, I was able to scrape it up with 2 of my business cards up off the counter. So added this extra into the next 2 ltr solution I mixed. All plants were watered with at least 1ltr of dechlorinated water PH'd to 6.3. Containing the following nutrients;- ♡ 3ml Seachem Seaweed ♡ 4ml Biobizz Fish Mix ♡ 4ml Biobizz Bio-Grow ♡ 3ml Biobizz Bloom ♡ 2ml Xpert Nutrients Bloom Booster ♡ 2ml Xpert Nutrients Cal-Mag ♡ .25g Ecothrive Biosys. ♡ 2.5g of Bicarbonate of Soda as PH UP. Unfortunately I have broken my PH pen too. Accidentally submerged it under water, then the readings went crazy. I'm leaving it to dry by standing it up but I'm most likely going to need a new one, which is extremely annoying 😑 I'm going start implementing the Scrog net probably some point next week if I let the plants that are in flower to just grow up now, as I do believe that I stunted Watermelon 🍉 by using too strenuous LST. Hopefully the plants still are able to grow upwards at this stage during flower for all the Purple Punch P1, P2 and P3. We will soon see! 28.1.25: My PH pen has packed up 😣 I've got to wait to get another. It's super annoying 😑 so I'm just judging by memory how to regulate it. Unfortunately, that's my only choice! I'm also out of the dechlorinator 😕 things are not going very well this week so far 😅 I guess we will have to make do, until I can get replenished. 29.1.25: I removed all the plants, hoovered, and disinfected the tent. There were several accidents when watering, causing some debris and splashes. I decided to just go ahead and get a few other things done. It's crazy how quickly things can become neglected! 😣 So I defoliated moderately on all plants except Gorilla Cookies seedling. I have absolutely dropped the ball on my lighting situation! My light was much further away than I thought! I turned it up to 100% and dropped it down to just under 2 feet away. After I reset the tent, I set up my scrog net. I removed 80% of all LST pegs. I am planning on letting the scrog net take over the training from here. I really want to minimise the risk of mould, so I decided to start using my dehumidifier. It has raised up to 73% RH this week, so it's necessary. Hopefully, I will be able to get my dechlorinator and PH pen soon! That's kind of essential to me. It's been a little bit of a stressful day in the garden, to be honest 😅 30.1.25: So I am expecting the arrival of my new PH pen today, as well as my new bottle of Ecothrive neutralise. It is supposed to measure the TDS and EC in addition to the standard TEMP and PH, which I had previously. Obviously, time will tell if it's any good or not. I realise, much too late now, that my lighting is very insufficient for this many plants. I need double the watts at least, and coverage is very poor. I remembered I had an old LED floor lamp, which was in a corner being unused. I decided to take the stand off, and Zip tied the pole onto the tent pole at the back left corner. I have no idea what the wattage is, and it's quite pathetic 😅 but I mean, I might as well use it, being as I definitely cannot afford more lights! 😣 Next grow, I will probably only grow 2 plants, max 4, and just use larger 7-10 Gallon pots. Being as I ran out of dechlorinator, I only watered some plants properly because I only had enough to make 6 litres. When my pen arrives, I will get everything properly watered. 31.1.25: The leaves of several plants are showing signs of iron deficiency. This is likely due to my PH pen packing up earlier. I now have a new pen. Due to this, I decided to use my Seachem Prime, which I use for my aquariums. As I wanted to get them watered properly, and my Ecothrive Neutralise hasn't arrived yet. I watered each plant with 1ltr of dechlorinated water PH'd to 6.0. I added .25g Ecothrive Biosys to the water. May give them a breather on the nutes and just use the Cal-Mag and Biosys. Being as I've just topped dressed with rich fertilisers, I'm sure that will be OK for the next several waterings. Snipped another couple leaves which were annoying me 😅 I realised this is one of the pots I put my clay pebbles the bottom of. So I've probably not been watering enough, as she's right at the back, and assuming all was good because the pot was heavy. I went ahead and gave all the plants a thorough watering each with: 2ltrs of dechlorinated water, PH'd to 6.2 with:- ♡ 4ml of Xpert Nutrients Cal-Mag amino acids. ♡ 4ml Biobizz Bio-Grow ♡ 4ml Seaweed extract liquid Going to keep an eye out to see when they need more in next couple of days. They're all looking very well, except the slight colour fade on Bubble Kush

📆 Week 12, 7-12 July 2024 Harvest 8 July - Turned light power down to 25%. Changed nutrient solution to RO water to begin flush. 11 July - Harvest 12 July - Begin curing time. 📑 Harvest time! She is ripe, danky, sticky, full of resin, solid, and I am pleasently suprised at the yield. This is not your ordinary Auto Afghan variety. She produces heavy buds and a lot of them. This is also the first auto I have grown using DWC in 12 weeks without manipulation - 18 hours straight from start to finish. I pushed her to the limit. Now she will hang in the closet at 50-55% RH and 70 degrees F, for about 7-10 days curing. Then she will trimmed and put into one quart glass mason jars, with 62% Boveda TurpShield and burped until 62% RH is maintained. The full potency potential and terp profile will be reached in about 30-45 days. 📆 19 July 2024 The Smoq Report: After 7 days of hanging, she was ready to cut. I trim and shape each individual bud, removing unwanted leaf and stem. It’s a process but worth it if you smoke bud. Her potency is evident. It will take the experienced smoker to a satisfying high and keep you there for a good hour or more before you want another hit. The smell and taste is of a typical Afghan. I was expecting a heavier yield, but in the end I guess we all hope for a little more! Maybe next grow! 🍶 Nutrient solution changed to RO water 💧 Using reverse osmosis water with EC/TDS at 0 🔆 Light power at 25%, DLI 20 canopy coverage at 18hrs 😤 Using PYPABL, Air Pump, 400GPH That is it for this grow. Thanks for following, reading and stopping by.

Absolutely Love these genetics one of my favorite grows so far cannot wait till harvest. The smells are immaculate.🌿💨💯