Likes
Comments
Share
@Natrona
Follow
Flowers are developing nicely but slowly. Very few feeder leaves are turning yellow yet. I saw some webs between one of her branches and Fractal, so I sprayed them with alcohol and burned some leaves. She and Fractal have the same dense bushy structure. The buds are tight to the stems which traps humidity and moisture inviting pests and fungus. After post, I had to chop one main cola due to rot. Pics above.
Likes
25
Share
Ola jardineiros e jardineiras, sejam bem vindos a mais uma semana dessa maravilha. Estamos chegando na oitava semana de cultivo e até aqui não tive quase nenhum problema, somente a falta de CalMag no começo da floração, depois que aumentei a dose elas voltaram a sua cor normal e dês de então estão ótimas. No começo desta semana a BPP Começou a resinar bastante o cheiro já é incrível os Buds estão Crescendo bastante e começando a engordar, acredito que agora ela cresça pouco de tamanho e comece a formar os botões lindos e resinados. Obrigado a todos que estão acompanhando esse cultivo. 🙏
Processing
Likes
13
Share
Alien vs Triangle is looking great, I think she's fully recovered from all of the HST abuse I put her through. She has some interesting Bonsai-esque bends. Bud sites are getting frosty too!👍 She's back-left in the group pics.
Likes
15
Share
@dinni5yn
Follow
Day 16: New grow week and took some sitting time to kind of adjust the soil and plant locations within the tent. Like I said in the beginning didn't fill the pots so kind of scooped out soil to a stand-bye pot and compressed the soil some near the stalks. I got so really nice healthy stalks that I'm gonna post so check em. Been probably overfeeding but at this point I need nutrient's and these ladies seem to be taking it pretty well so not really worried about it and adding GREASE into my batch of feeding this week. I left a gallon of pre-mix in the tent and am a bit worried so kind of went for a fresh batch and tossed the one sitting in the tent.(Damn it) Raised the light's also just because I want them to reach up. I love to stockiness of my plants right now but need more height. 8ish..got a great pair of paring scissors so trimmed and topped my girls...not sure if that was a good move this early in the grow but this is where the learning and experience comes from I guess. Leaving one alone to have comparisons. Think I'm gonna leave em be for a few and see what happens! Day 17: greeting growth spurts like "wow" Finished off second week batch with a all around watering using a 2 cup pouring cup. Giving each plant about 1 1/2 cups per plant around the main stem outwards. Gonna be mixing my 3rd week feeding probably with 2morrows watering of VPT sesezym and Carbo load for watering but no feeding until Sunday afternoon. Day 18: The gloves are off and I'm swinging for the fences at this point. Watering every day it seems like just trying to keep thing moist and in growth. Watering diameter increasing and going for bottom root watering if that makes any sense. I knocked over one of my babies twice and she is soo rooted, didn't even phase her so think my stems are pretty strong. Took away the milk crate training wheels and giving my plants healthy doses of nutrients to keep them vegging out. Day 19: 7ish Heavy feeding and went up on all my nutrients to full 8ml per gallon. I have 7 plants and usually go through that gallon per feeding at this point. Expanding the watering and not quite to the edges yes but sure i'll be there in a few days give or take. Sat with the plants while watering listening to B.M. and just enjoying the expressions and melodies of life while learning the finer points of growing. os Clipped my tops and am getting those branches to grow out so happy about that. I was a bit nervous seeing those pretty tops laying in the dirt but was happy to see the results of the training. Gonna start with a bit of twine training in the comings days and watching for cal and mag deficiencies as I go. I see a few leaves looking a bit off color so will mist in the coming days. On another note got a pack of Fast Flowers from 420Fastbuds!!!! The Buds look soooo beautiful and enticing that I just couldn't resist!!! My next grow is gonna be so legit!!!! Day 20: lightly misted with some Golden Goddess and gonna seszyme vpt with AE,GI,MT rhino and b2....not alot since soil moist but enough on the outsides to keep the root zone going. Plants are getting really bushy and snipping but not too much. Day 21: Watering today and just thinking bout this 4th week. Watering with some sensi cal. Also going for another humidifyer in tha tent for more even humidification. My plants look pretty strong but looking for more roots to get bigger plants. Gonna stay with the vtp mix. I got 5gallon pot so we got the space. Didn't put any clay @ bottom of my pots so once these pots flush, hope I get good drainage. Been defoliating...smh. like trimming my hair always too much so just hitting the bottom parts of plants so that they can get air. 8ish: thinking I may need to go up on my PH a bit just to prevent my roots from locking from all the nutrition. I want them to be able to get all these nutrients in a get some decent sized plants. Not sure if it's the cutting of the lower fan leaves. Just have to wait until morning to see how my plants respond.
Likes
2
Share
Skywalker rounding the corner. Harvested 8/7 @ Day 76 from sprout Blueberry bulking up. Glueberry og done stretching and bulking up now
Likes
11
Share
@Bncgrower
Follow
So far so good, this girl is developing really well. She's heading really well into the final weeks ✌️💪🌿
Likes
290
Share
@Ferenc
Follow
I decided to place in the tent after 6 weeks. I did LST as well. So it will be half outdoor half indoor. Basically I planted a Auto outside but I can see it ain't gonna be a good yielder. So I should wait till autumn and also that time there is much less sun so I would not have nothing on it. I dont wanna take a risk for nothing so better to boost artificially and have better yield. Day 46: I needed to.cut back she was wilt stressed in the new environment. I removed almost all the fan leaves.
Likes
2
Share
HAZIRLIK Dolabı yapmak bir aydan fazla ileri sürdü; aydınlatma, havalandırması, iç kaplaması, montajı, elektrik kabloları, fişleri, soketleri, prizleri vb. Tüm bunların ardından, sonunda bitirmem ve kotiledonların görünenlerin görünmediğini gördüm. Burada yaşadığım mücadeleyi okuduğunuzda, heyecanımı ve mutluluğumu paylaştığınızı düşünüyorum… =) //LED'LER// Torch LED'leri kullanıyorum ve bu LED'ler fiziksel olarak oldukça büyük olduğu için, dolapta ciddi miktarda dikey alan kaplıyorlar. Toplam 70 cm'lik aralıklardan 50 cm'ye düşüyorlardı ve toprak birleştirmeyle yaklaşık 40 cm'ye düştü, bu da başlangıç ​​büyümesi için neredeyse hiç yer bırakmadı. Bunu çözmek için Torch LED'lerini plastik yuvalarından çıkardım ve bunları ayrı ayrı boyutlandırılmış ahşap plakaya düz bir şekilde monte ettim. Bunu yaparak yaklaşık 15 cm'lik alandan tasarruf sağladınız. Ancak dolap yapısı ve Torch LED'lerinin kendisi nedeniyle ciddi ısınma sorunlarının belirtileri. //KABİN// LED'leri açtığımda, 26,5°C'lik iç havayı alıp 37–38°C'de dışarıya atıyorlardı. Her lamba bana yaklaşık +4°C'lik bir ısı artışı sağlıyordu. Durum böyle dönemde fan kapsamını artırdım; bu sıcaklıkta yardımcı oldu, ancak daha sonra içerideki nem 35–30'a, hatta %25'e düştü. Ne yeteneğimi düşünürken, 12V çift taraflı bir Peltier modül kullanmayı planladım: soğuklukta bakır borular sararak bunu fan destekli bir sıcaklığa dönüştürdüm. Aslında işe yarayabilirdi, ancak sıcak ortamdan ısıyı uzaklaştırmak için ihtiyacım olan sistem çok hantal hale geldi. O yerde, "Büyüme hayali bitti" dedim ve vazgeçtim. Birkaç gün sonra "Neden olmasın?" diye düşündüm ve dolabı balkona taşımaya karar verdim. Sonuçta, gizliydi - kimse içinde ne olduğunu bilmeyecekti - ve balkon uydu yoluyla mükemmeldi. Dolap balkonunda olacağından, iç kısım ısıdan, yağmurdan, bölgelerden ve diğer zararlılardan tamamen yalıtılması gerekiyordu. Tüm delikleri ve ortamları sıcak silikonla kapatırım. Daha sonra ısıl işlem köpüğü yerleştirdim ve her şeyi bölme filmle kapladım. Tüm bunları yaparken termostat, ısıtıcı, nemlendirme ve vantilatör için hiçbir şey görünmemesi için tüm kablo bağlantılarını da gizledim. LED aydınlatma için tek tek veya hepsi birlikte kontrol edilebilen ayrı lamba yuvaları ekledim. Ayrıca dolap kapağı açıldığında tüm ana LED'lerin otomatik olarak söndüğü ve yalnızca küçük bir 5W LED'in açık kaldığı bir sistemim oluştu. Vantilatörü dolabın sağ üst arka köşesine monte ederek egzozu diğer noktalara yönlendirdim. Vantilatörün gücünde, negatif basınç o kadar güçlüydü ki hava yalnızca girişten katılıyordu - başka hiçbir yerde 0,001 m³ bile hava kaçağı yoktu. (Bunu hava verileri için değil, zararlıları uzak tutmak için yaptım.) //SICAKLIK VE NEM// Dolabı balkona taşındıktan sonra bu sefer ciddi bir soğukluk sorunuyla karşılaştım. Geceleri sıcaklık 8-9°C'ye düşüyor, gündüzleri ise 24-27°C'ye kadar çıkıyor. Elektrikli fanlı ısıtıcılar kullanmak istemedim çünkü havayı çok kurutuyorlar ve tehlikeliler. Peltier fikrinden ilham alarak tekrar düşünürken çözümümü bir PTC ısıtıcı kullanarak buldum. Hava bağlantıları olan iki alüminyum bloktan oluşan bir PTC ısıtma elemanı yerleştirdim ve gelen tüm havayı bu kanallardan mülkler. Sistemi 24,5°C'de açılıp 24,6°C'de kapanacak şekilde ayarladım. Bu şekilde sıcaklık sadece 1,5° tolerans içinde -24,5 ile 26,5°C arasında dalgalandı ve LED sayıları azaldıkça daha stabil hale geldi. PTC'yi termostata bağlayarak ısıtma sistemini tamamladım. Gündüz sıcaklık sorunlarının çözülmesi için, elektrikler 11:45'te kapanıp 17:45'te tekrar açılacak şekilde programladım; böylece 6 saatlik bir kesinti süresini elde ettim. Bu süre boyunca kabin yaklaşık 24°C'lik dış havayı çekiyor, maksimum 27°C'ye ulaşıyor ve ardından tekrar soğumaya başlıyor; tam da bu noktada PTC devreye giriyor. Böylece daha önceki büyük yangının sorunu tamamen çözülmüş olmuştu. Ayrıca nemlendirmeyi termostata bağlayıp %70'e ayarlayarak nem sorunu da çözülürm. Tüm bu süreci 1,5 ayımı aldı ama değdi. 1-2-3. güne kadar tek led 3. günde 10. güne kadar 3 ledide açtım ama bitkide büyüme problemi olduğunu gördüğüm için ışıkları söndürüp tek ışık 40cmden devam ettim.
Likes
17
Share
Vamos familia actualizamos la cosecha de las Purple OG KUSH de Dutchfem . La verdad que el secado muy bien 7 días en Malla y a los botes, 40% humedad y 24 grados es la temperatura ambiental que han tenido en el secado. Por lo demás de miedo os la recomiendo. Gracias a DutchFem, Agrobeta y Mars hydro , sin ellos este proyecto no sería igual 🙏. Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Buenos humos.
Likes
16
Share
Well this was a really straight forward grow, very very pleased with the outcome and the bud isn’t completely cured 😋 5 Gal fabric pot with BioBizz light mix, some light consistent feeding, a FIM and basic LST, look at the outcome! No wonder their strain wins awards! I will 100% be growing more NL! Thank you RQS ✌️🙌👌🙏
Likes
90
Share
@MrCOCO
Follow
Hi everyone 🍃🍃🍃The girls do very well ...🍃🍃🍃 Pinching turned out to be a hit because everything looks nice and I enjoy my eyes when I look at them ...🍃🍃🍃 Happy growing 🍃🍃🍃
Likes
21
Share
week 3 of the flowering stage of MD XXL 🙌 1 of the 3 is realy not doing good and is yellowing alot, i dont know why this is, i think its heat stress combined with nutrient deficiency but im not 100% sure. I think shes doing better since i went from 3ml/l alga bloom to 4ml/l and adding 1ml/l green sensation to it. Other 2 MD XXLs are doing just fine, 😉 its still very hot where i live, around 30 degrees celcius every day, global warming all the way... i wonder what my harvest amount will be! For the people in the Grow Questions, i dont check PH/TDS simply because my budget couldnt sustain the equipment, ill get it next grow. Also the alga grow/bloom line from plagron states that you dont need to check PH levels because the algae in the nutrients will regulate it apparently, I also choose NOT to defoliate since i read alot of different stuff about it. I think i just let nature do its way and only remove those bad fans blocking my beautiful buds 👹
Likes
490
Share
Day 62: time to flush! Flushed her with canna flush once so now for 5-7 days I will just give her plain water with ph- She looks so nice! But way to much nitrogen in her This is the light that I’m using for this grow! Mars hydro SP3000 High PPFD at 2.8 umol/j, average yield at 2.5g/w, increasing your yield 50% or more compared with old blurple and HPS lights, 300 watts output. Dimmer knob added, more convenient to adjust the brightness. Up to 30 lights can be daisy-chained and control together on just one light, or just have one lamp in 120x60 tent is perfect for light. https://www.instagram.com/marshydro_aliexpress2/
Likes
16
Share
Defoliated again - getting her primed for beautiful flower production.