Likes
Comments
Share
9/11/24 sadly the sun isnt hitting these girls as much as i wish. theyve got a decent smell and some decent trichome coverage for only being the begining of week 4. hopefully they chunk up and arent too far behind because of the lack of sun/ light penetration. ive had half a mind to move them indoors to finish
Likes
18
Share
Day 5 since time change to 12/12. Hey everyone ☺️. Finally the time has come :-) The lady moved into the flower tent on January 6th, 2021 😁. The day before, of course, a cutting was taken 👍. In the flowering tent, the distance between the plant and the lamp is 40 cm so that she can get used to the strength of the lamp. After 3-5 days I go down to 30 cm. This week it was watered twice with 1 l per plant. GHSC enhancers were added to one wash :-). Flower fertilizer will only be added in 12-16 days as soon as the first blossoms are there :-). Otherwise the tent was completely cleaned and the humidifier refilled. For the next few days I have filled fresh osmosis water in canisters again :-). Next week I will remove the bottom shoots so that the energy doesn't end up going into small popcorn buds 😉. There is nothing more to report this week and I wish you all a lot of fun with the update 😀. Stay healthy and let it grow 🙏🏻🍀 You can buy this Strain at : https://sweetseeds.es/de/red-mandarine-f1-fast-version/ Type: Red Mandarine F1 Fast Version ☝️🏼 Genetics: Red Poison Auto®️ (SWS39) X Tangie (California Orange x Hybrid Skunk) 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Likes
13
Share
@Luv2Grow
Follow
Day 50 - Starting week 8 and she’s as good as she can be right now. After reading some advice I may be giving her too much water so gonna slow down how much I give her from here on out. Even though this girl won’t produce as much as I’d like, I’ll still get something and will be growing another one soon. Day 52 - She still seems to be doing ok right now and the leaves are starting to fade a bit so will probably give her another round of nutes in the next couple of days but it might be too little to late for this girl. Day 53 - She’s starting to put on a bit of weight now. All her bud sites are all starting to lean over so might have to start using the yo-yo’s to keep her propped up. She’s just about dry so she’ll get some water tomorrow. Day 54 - She’s still doing good right now and gave her about half a gallon of water and nutes today. She still seems to be fattening up on a few of the buds but some are still pretty fluffy. She’s still pretty young right now so holding out hope that she’ll beef up, though I’m not seeing much more pistil development but all her trichs are still clear with a couple cloudy mixed in there. Day 55 - All still going well but nothing much to speak of right now. She took well to the watering yesterday and just took her out for some updated pictures and such.
Likes
14
Share
@Rangaku
Follow
All trimmed up and on the rack for drying , wasn’t a difficult trim but still took 6 hours . She’s dense as , sticky as and smells phenomenal. Big shout out to Weedseed express for coming thru with another banging strain , this one was sentimental to the Mrs as her fave strain ever and Weedseed express done us proud . Looks to be about 12 oz of the absolute fruit .
Likes
15
Share
4 of 12 Buds are finish with 20% amber Trichomes. The rest need a little more time. Smell is amazing, Whole Plant is very very sticky! Only the 4 Buds have a weight of 65gr wet..
Likes
10
Share
@Dreadnug
Follow
Coming along nicely - weekly nutes continue. Training the 4 offshoots and trimmed at the 3rd node. She is long on most sides so it will be interesting training her back to get ready for scrog.
Likes
16
Share
@Kingseeds
Follow
Dark purple buds and frozen cola Finish in 67 days She needs normal light and feeding
Likes
3
Share
. 🌱 : 💧 : 4l day 43, 2l day 45 no nutrients, 4l day 47, back to 0,1ml/l pk 13-14 💡 : Dli: 40 mol/m²/d 🤔 :
Likes
19
Share
Sorprendente! Questa wedding cake sta venendo su meglio di quello che credevo...o meglio è venuta su meglio di quello che mi immaginavo.altre 2 settimane più o meno e tirerò via anche lei.e vi dirò come sarà 🤤😍💪😂..sono sicuro che passerà i 100 grammi asciutta. ..I fiori sono super strong. Duri come na pietra...fa venire l'acquolina 😅😋😋😂
Likes
4
Share
@Ninjabuds
Follow
White Runtz has been the biggest plant out of all the SOG plants this run. It has large leaves and a large body to go with All of the plants have really taken off. Usually I have a couple plants that are much smaller but all of these plants are getting huge. Seeing I got a new eluefah uap1 500 the other day and I have my 2 fastbuds plants under that now I have my spider farmer light free. So I popped up another 2x2 and moved 3 of the 10 plants into the 2x2 and left the 7 other in the 2x4.
Processing
Likes
56
Share
Bonjour à tous les padawans et maîtres jedis stretch 15 centimètres (Stretch explanations more) EXPOSURE TO LIGHT One of the main culprits in abnormal stretching of cannabis plants is the lack of light. Plants that are too far from an adequate light source will respond by accelerating stem growth in order to get closer to the lamp themselves. Especially when there are many other plants. A lack of lighting can easily cause overcrowding in a growing chamber, reducing the steady progression of your crop and the distance ratio between your bulbs and your plants. To address this problem, be sure to provide enough light to your plants to prevent stem growth. At the same time, you should not position your lights too close to your plants either since this would also result in an over-stretching of the stems and in some cases, the loss of your crop. In addition to the distance between the light source and the plant, the type of light you will use also affects the size of the stretching of your crop. The orange and red lights encourage stretching and result in thinner, larger stems. And conversely, blue light stimulates a growth of thicker stems and a smaller size. When a species is ready to enter the vegetative phase and undergo its most drastic stretching period, metal halide lamps can be used to deter far too long stems. THE HEAT Heat is another essential element that can determine the stretch size of your plants during vegetation. Temperatures above 27 degrees push the stems to lengthen more and more and will propel the potential of sativas to push as high as possible. Heat lamps that are positioned too close to plants create an intolerable environment that will grow large, soft plants that will potentially wobble until they fall and lose flowers in its fall. OTHER CAUSES OF STRETCHING There are multiple variables that can lead to the stretching of plants beyond what could normally be expected of the plant. Environmental stressors resulting from transplantation (when a plant passes from one pot to another) can cause the plant to return to shock. This will eventually trigger a reaction causing a stretch. Cannabis plants that are not grown in decent conditions or do not receive enough nutrients will respond in a variety of ways and this includes stretching. Crops that are not spaced far enough apart are likely to stretch to sting the light to other plants. Due to extreme proximity, the plants will fight among themselves to reach the light, forcing them to expand as much as possible throughout the crop. HOW TO CONTROL STRETCHING DURING FLOWERING Stretching during flowering, you guessed it, takes place when you move your plants from the vegetation stage to the flowering stage. This is a completely normal reaction, as your plants are preparing to bear the weight of their heads. Stretching of a plant at the beginning of flowering varies widely; some plants can double in height while others grow only a few centimetres. There are, however, two main variables that can give you at least an idea of how your plants are stretching during flowering, and how much. Here are these two variables: Variety: Genetics has the greatest impact on the size of your plant. In general, sativa varieties stretch more than indicas and tend to develop long, slender stems. Light: Some lights, such as HPS, are more likely to encourage stretching. In addition, great distances between your canopy and your lights will cause the plants to stretch as they try to get closer to the light source. Stretching during flowering usually lasts the first two weeks of the phase. To minimize stretching, keep your lights between 10 (for CFL) and 30 centimetres (for HID) of your canopy. Finally, choose indica varieties if you have a smaller growing space. HOW TO AVOID STRETCHING In many cases, you can expect your cannabis plants to stretch during the flowering phase. Keeping that in mind helps to make a plan in case your species ends up growing much more than you could have imagined. If the information is available, get information on the standard size of your species and compare it to the size of your growing space taking into account the necessary distances between the bulbs and the plants. TRAFFIC While outdoor crop operations benefit from natural air to naturally limit stretching, indoor crops must assume the maintenance of air circulation within a confined space. Basic ventilation is enough to help the cannabis stems strengthen and become thicker rather than too high. In this way, the plants continue to grow vigorously without reaching heights and at the same time, your tolerance ceiling. MANUAL INTERVENTION For growers who want to get their hands dirty, there are physical procedures that can be done to reduce stretching. Similar to the natural effect that the wind has on cannabis plants, manually bending the leaves and stems will cause tiny cracks in the plant's tissues that will cause the plant to focus on regenerating its wounds instead of its vertical growth. THE TOPPING Topping is a form of manual intervention on cannabis to influence its performance, shape or size. In essence, topping is a process in which a new node is cut, growing from the plant to reduce its size and create a "v"-shaped notch that will eventually form two heads. Topping may be an effective measure to combat stretching, but it is important not to do so when the flowering phase begins. In most cases, an abnormal stretch of cannabis plants will not completely destroy your crop. In fact, stretching can indeed help increase your performance. For growers with a growing operation large enough to contain tall plants, stretching can increase the total yield of a species with more vertical space for head formation. In both cases, stretching can easily be planned in advance and there are multiple solutions to help you with this problem which is all too common. Jour49 arrosage Jour51 arrosage 2 litres d'eau Jour 54 légère defolliation arrosage avec deux litres d'eau ph6.3 à laquelle j'ajoute 0.6 gramme de feeding enhancer greenhouse Good luck for your grow 🤞🌱 May the force be with you 💪
Likes
6
Share
Amazing Colours! As you can see the colours on this plant at the end of its run are absolutely amazing. The buds didnt out as dense as I had hoped but I think thats just this pheno and we are busy hunting a denser pheno atm. what a great strain to grow though. no problems during the cycle of the plant and the colours make it so rewarding to grow! I would definitely recommend this strain to people who like fruity and colourful plants. Barneys never disappoints really;)
Likes
20
Share
5/16/2024 5/21 Wish there was more to report on these
Likes
6
Share
When should they start flowering?
Likes
13
Share
@Haoss
Follow
Another topping was done on the plant, also defoliation was done, let's see how it will withstand stress 😊
Likes
6
Share
I cut another part of the girls, and the total is even greater than the first part! We wait another week for the final sums, but right now the flavor is unique.
Likes
4
Share
Week 3 all is fine growing as they should be and responding good tonthe 24 hours of light
Likes
72
Share
@BodyByVio
Follow
This week I finally completed the RDWC system. Everything is working how it suppose to. The chiller is set to 66 degrees Fahrenheit. Also I start adding 1000ppm CO2. Lighting intensity ( Fluence Spydr 2i) is set to 75%.