Here I shortly document the making of Cannabis-infused-butter for what ever you want to cook with it. 1. Decarboxylate your weed: Grind the amount you want to use (pref 8-15 grams) spread it on a bakingsheet and bake it at 110 degrees for 40 minutes. 2. Infuse it into butter: Use 250grams butter+ 200ml water and heat it up to 70-90degrees (preferably keep it at 80degrees) add the weed and let it "simmer" for 3-4hours. Stir every 5-20minutes and keep the temperatue inbetween 70-90degrees or you destroy THC. 3. Seperate the weed from the butter: Use a kitchentowel or teafilter to seperate the butter. After let it cool down in a fridge. 4. Enjoy the cooking/baking. Use it inbetween 5days or freeze it. Enjoy the high! its banging👌 Bubblehash-Process coming soon!

Update the to a 4x8 this week and added a HLG 300 V2 RSpec with the futur vert FM8 flora max 660watts pumping 960 watts now .. Every thing is stacking up an fattening up beautiful in week 4 , The frost is coming out like a snow storm now in to week 5 flower ... I’m very impressed with the bud size on the slurricane ix this early on !!

Smooth trim and harvest, very time-consuming. I think we spent over 8 days working on the autos. Now I can rest until early September.

I would like to try and Grow this one again, loads of variables messed this grow up. It was my first time: flood and drain, using Canna Coco A&B, and also using small pots and loads of them to replace 8 big pots. You live and you learn

Heya👍🤙👍🌱 Off to a good start. Welcome to your new home ladies. Check out my Facebook profile: https://www.facebook.com/share/v/H6PnoahTHrEzm63U/?mibextid=oFDknk Big BIG BIG thank you to Sebastien, Heather from Fastbuds420. You guys are the best. Can't wait for the next live. Even Bigger shout out to Hydroponic.co.za. My local Hydro Shop and Sponsor. Thank you Sir. 👍🤙👍🌱

Ha un odore di ananas che non potete immaginare

Super tasty buds very dense tastes like strawberry haribo definitely recommend this strain a super easy grow

Good growth, Blueberry powering through cal mag issue. Skywalker will be first to harvest for sure. Insane amount of frost on that plant. Glueberry og continues to require fairly frequent defoliations to open up canopy. Blueberry starting to get some subtle berry coming through.

Cresce cresce cresce ....speriamo si fermi sono arrivato al limite di distanza dalla lampada . Ho paura di bruciarle con la troppa luce . Comunque ha molti rami belli resistenti. Speriamo che esploda anche lei con gemme pesanti ! 🍀

Venga familia que ya viene la cosecha de estas Runtz de ZamnesiaSeeds, que ganas que tenia ya de darles machetazo. No veas que pinta que tienen estas plantas. Las flores aparte de prietas se ven bien resinosas. a sido una genética con la que disfruté bastante cultivarla, no es a mi parecer complicada cultivarla y merece la pena si eres cultivador con o sin experiencia que busque sabores exóticos de genéticas calis Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí es todo

Update coming.

1/3 driver on my quantumboard is dead ☠️ now only 440wt 💡

Ran into some Calcium/Phosphorus trouble !? First deficiency in the grow. Topped up with new nutrient solution, added some CalMag and Universol Yellow 12/32/12. Raised PH to 6.1 and EC to 1850. Added 100ml 12% H2O2 to make sure no PH trouble occurs. Switched the Carbon filter around so that I can lift my light a little more. Orion F1 is getting really frosty ~2 more weeks? The Northern Lights take some more time.

Days 35-42 (Day 36) Some minor problems starting to arise here. A few times this week it got up to 90+ degrees which I think may have caused a bit of heat stress in some of the plants. I’m seeing a bit of cupping/crinkles on some of the fan leaves and some of the new growth is looking pretty gnarled and twisted. I hear windburn can cause this too so I’m turning my fans down to low speed. This could also be a problem with humidity so I’m going to turn off my humidifier, dim the lights and raise them. During my last feeding I mulched in some worm castings but it seems like they’re keeping the soil/coco from drying out. Pots are still decently heavy and even the surface is still quite moist but they aren’t showing any major signs of overwatering. I figure it will only be a few weeks before the castings break down so I will just leave it. A few of the plants are starting to show yellowing leaf tips which is probably some kind of micro nutrient lockout from my PH being slightly too high. It could also be from nute burn so I will water in 6.0 until I see some runoff. Although the most likely culprit is potassium excess. I’ve been feeding potassium almost as much as nitrogen so far. I know that can cause the yellowing of leaf tips by locking out trace minerals. It can also cause leaf problems like crinkling. Excess K can even cause water retention! Will water at 6.0 until run off next watering. The lst is coming along nicely. It was a good idea to remove the first two sets of branches (not leaves). Now I have 4-6 perfectly even stems coming from each plant that I plan to top one more time each. (Day 37) Today I’m going to vacuum, clean, wipe down and spray all my equipment in the tent. I’ve been letting the floor get quite dirty and I haven’t had the chance for a thorough clean since last round. I’m kind of surprised I haven’t seen any powdery mildew yet. I guess the prevention spray is working because the room has to be infected from my last crop. (Day 40) I was reading that you can foliar spray whatever you are deficient in for an immediate uptake. I‘m going to try that with my current potassium excess since it locks out trace minerals. I’m going to foliar feed a bit of phytoplankton at 15ml/L and some MagnifiCal + VeloKelp from Remo nutrients both at 5ml/L. The cal mag is not organic but as long as it’s not going into the soil and doesn’t contain chlorine I’m fine with it. I’m also going to be changing the light cycle to 18/6 for the remainder of veg. This will be their first dark cycle so they can properly foliar feed. Edit: humidity shot up to 85% a few hours after foliar spray. I went to top dress everything today and I mixed up the plants while doing so! So the ones I was unsure about I gave 1 extra tablespoon. I won’t top dress again for at least 10 days. Might give a light tea sometime next week. I also tilled the shit out of the top of each pot. It had a hard crusty layer on top that was keeping the medium from drying out properly. I’m not going to water again until everything is bone dry. Then I will water until slight runoff at 6.0 ph with some Dr. Marijane bacteria/root probiotic. I’m starting too see a lot more of these abrasions on some of the bigger fan leaves. It almost looks like thrip damage but I’m 100% sure it’s not a pest above ground. It could be bulb mites, which I found in my worm castings but I can’t check until the roots are more established in their pots. The leaves themselves are cold and feel damp to the touch. I haven’t even seen a fungus gnat since I last fed. I’m hoping it’s related to the K excess and clears up with the troubleshooting. (Day 41) Just ordered a wire cube rack to prop my plants up with and help evaporation/root warmth. Each cube is 11.8”x11.8”x11.8” and it comes with 16 cubes. So it will fit just perfectly in my 4x4. Depending on the size, I might order another one for the flower room where I would need 25 cubes.

So this was my third tropicana, so far all different phenos, this was the biggest yielder of them

Mir gefällt Melonade Runtz bis jetzt sehr gut. Sie hat einen schnellen Wachstum und macht den Anschein als würde sie dicke fette Buds produzieren. Ich bin sehr gespannt wie dieser Run wird. Bis jetzt hatte keine Pflanze irgendwelche Mangelerscheinungen. Stabile Genetik von Dutch Passion 💚

Light deffol was needed just to remove the leaves with neuit burns caused by watering and splashing starting to reduce the ppm to plain rain water. shes looking good what you think?? any ideas what the buds are going to be size,weight has anyone grown this strain before? i recon coke cans size i hope