Heating Mat to keep temp in 80’s Day15)( Week 3 Day1) No water,good Added Mushie Man Day 16) idk if I’m right but growth seems a lil slow hopefully nothings wrong Day 18) Added c02 yesterday night , gonna put the lights at 50 watts Day19) Feeding stronger, keep bringing light up more as the plant grows so it’s 30 inches above the plant Day20) GROWTH IS AMAZING , idk if it’s the co2 or it’s just getting older, prolly both either way it’s great news, moving light up more, I’ll start LST on Sunday which is day 22, cleaning fan cause of humidifier ( tap water), keep humidity in high 50s and temp above 80 , for humidity reasons I only turn on in-line fan for a couple hours some afternoons Day 21) Fed Calmag, grow and micro to tap water(PH 6.2), added more coco to the top,will LST tmrw

Muy buenas a tod@s... Buenas otra semanita para las Green poison... Me van gustando, las veo fuertes, crecen bien... De momento todo en orden, buen ambiente y buena luz, una semana más y a floración... 💪🏻💪🏻 A ver q tal salen... Bueno espero les guste... Un saludo y buenos humos para tod@s... 🔥🔥💨💨💨 ⚕️😎💎 🇦🇷🤝🏻🇪🇦

Welcome ladies and gentlemen at veg week 6, After a full recovery week we continued with the trainings. This week a good defoliation was made and took all of the unwanted growth to the height of the third node on day 38. After 2 days the ladies bounced back with a vigorous top growth, was lovely to see. 🌞👨‍🌾🏻 Watered twice this week with de chlorinated tap water and nutrients, 2,5 litre each plant. I am running the TS3000 at 45-50% 30 cm above the canopy. The rest of the week just tied down the stems that extended higher than the net. Probably was the last week in veg, next is gonna be a transition one with the last defo and we are ready for bloom, yeah. See you Growmies and Stay safe! Peace ✌️🏻

1 of the bubba kush & 2 of the gorilla zkittlez are a little behind but over all everything seems to be going good so far! Day 10 update transplanted all the ones in smaller pots to 5 gallon pots except 1 of the bubba Kush it still needs a few more days! Everything else seems to be going great!

This is a very easy plant to grow, in my case i had some problems the last 4 weeks with heat that i couldn't resolve. I have had temperatures around 34 degrees Celsius when my light has bean on and around 25 when off.

I didn t expected nothing from this plant, because of the slow and stunt start, but after the 3rd week it start to get "bigger" i m gonna try it again while i have another seed!💪 Anyway the result wasn t much, but amazing! Thanks for who followed the process, happy grow to everyone!👽

Day 93 - Fattened up good, getting really heavy....posted pic of test bud.... vid of the led uv globe i got on ebay... works awesome.... highly recommend...... 😎 maybe 1 more week.... they smell delicious, not very strong smell.... just normal water in bottom drip tray, dutch master one gold ....next week, flush em and next sunday pull em..... idk.... Day 95 - had a good look at both girls and worked out a harvest plan...... i've started flushing/watering on the smaller one, and sunday (day 100) will be her last. i'll leave the larger one (she's still quiet white) for another week and re evaluate her fate next week. Day 97 - 4 vids .... looks good 😎 getting a 1600x Camera Endoscope USB Digital Microscope from ebay, see if it will help with harvest........ 😎

She's being grown without any training method,just 100% natural and organically grown,in her soil mix she has guanokalong seaweed powder,complete organics and grow and flo by florians living organics which is full of humic and fulvic acids and 10 different types of mycorrizae and beneficial fungus,plus I'm watering with guanokalong extract and also my lactobacillus liquid made by myself,she looks super happy and green,she's definitely a big lady and she loves her house 😍💚🌱 #organicmedicine ✌️

11/24: The shorter MPP is now the taller MPP. Both plants have great structure and very thick stalks. Fed today and sprayed with microlife super seaweed. 11/25: Had to raise the lights about 5 inches because of the taller plants, so both of these girls are on platforms now. 11/27: I fed them today and raised the lights a few more inches. 11/28: I sprayed them with Microlife Maximum Blooms today.

8th week of flowering starts now. Flowers are very big and sticky, a few trichs have that milky tint and I already noticed ambered ones. I started flushing but I’m facing issue to remove the runaway water from cups. 7 plants for that size was a bit too much for a first. But that’s a lesson for future grows ! Humidity is also very hard to keep under control as I live in a very humid area. Flushing doesn’t help and I definitely have to invest in a good dehumidifier for next grow. A few small buds, with skinny stem started to bend because of buds weight.

The beginning of the flowering stage with some LST..🌱 #CultivationsTheMotivation

Día 36. Estamos en 6ta semana. Los esquejes se atrasaron debido a que han sido días muy fríos y no he logrado enraizarlos. Decidí poner el extractor de aire junto con la bomba de aire, así solamente se prende 15 minutos cada hora. Así estoy logrando temperaturas mayores a 24°C en el indoor y así voy a lograr el enraizado. La planta ya tiene un tamaño que ocupa casi todo el indoor. Pero lo importante es que la voy guiando y ya estoy proyectando como va a ir cada rama. El tamaño va a exceder lo que esperaba, pero aún así creo que si logro lo que tengo en mente, voy a sacar muy buenos resultados. Igual no me voy a arriesgar demasiado, así que si contando 10 días desde ahora, no logro que los esquejes enraicen, voy a pasar la madre a floración sola. Cómo pueden ver, las ramas están bastante gruesas, y el la ramificaciones van ganando su lugar cada una. Las raíces son demasiado grandes, aunque sé que voy a poder poner la planta en el sistema de arriba igual, aunque me voy a tener que ayudar de algo para meterlas. Es importante no utilizar las manos, ya que se pueden transmitir muchos hongos. Voy a seguir actualizando e ir viendo que pasa. Pero ya estamos en los últimos días de crecimiento, haya o no esquejes. Incluso puede que ya pase la planta al indoor de arriba para darle mayor libertad de crecimiento. Esto me va a servir para tlmar en cuenta en la próxima camada que se vendrá. La idea de esto es hacer las cosas rápido, y no en gran tamaño. Pero siendo que ya estoy en el baile, no me queda otra que bailar. Día 40 Los esquejes no estaban enraizando, así que decidí cambiarlos de lugar y los puse arriba de la luz, donde les da calor y luz tenue. Espero que ahora si agarren. Y hoy fue el gran día, pasé la planta madre al módulo de arriba. Pero lo voy a dejar una semana más creciendo. De esa forma veo si los esquejes llegan a agarrar a tiempo. Y además tuve un problema en el trasplante. Primero que la planta se hizo más grande que lo esperado, y la raíz también. Cuando la pasé, hubo contacto de la raiz con prácticamente todo lo que había cerca. Sumado a que se enredó en el oxigenador, así que quedó una pidra difusora en la raíz. Dado el alto riesgo de haberla contaminado con algún hongo, le puse una solución de agua con agua oxigenada, recirculando continuamente, para lavar las raices y de paso bajar el stress de teansplante. Mañana veremos cómo arranca el día. En el aprendizaje me llevo que en la madre, es mejor hacer un corte en el primer nudo, o dejar las ramas del segundo y quitar las del primero. Y así que queden sólo dos ramas, para luego dejar a los esquejes en el medio. Eso planeo hacer con la próxima variedad. Entre tanto ahora sólo me preocupa que la raíz no se haya contaminado en el traspaso. Ya en 8 días estaré pasando a floración si no hay esquejes. Si llegan a agarrar, habrá que dar unos días de crecimiento hasta que alcancen a la madre en altura. Pero ya está todo en definición. Ahora sólo queda esperar y seguir guiando a la planta. Ya tengo ganas de poner la próxima, pero falta bastante para eso. Tengo 10 semanas de flora, así que recién en 5 semanas voy a poner la nueva madre.

Welcome to the Green House CUP 🏆 Hi everyone :-) I hope you are all fine 🙏🏻. This week the lady has developed really well 😍👍, which probably has something to do with the Green House Powder feeding that she has been using for a few days 😎. I will top her tomorrow for the first time. After a few more days, I will spontaneously decide whether to do LST or a few more times top :-) Depending on what time allows and how it develops 🤗. It seems to be a very nice genetics. This is how you are used to from Green House 😍🙏🏻. I wish you all a good start to the week, stay healthy 🙏🏻 and let it grow 😎👍 Green House Seeds Company Cup 🏆 Type: Wonder Pie ☝️🏼 Genetics: Wedding Cake x OG Kush 👍😍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Flower Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Earth: Canna Bio ☝️🏼 Fertilizer: Bio Grow Feeding ( GHSC ) , Enhancer ( GHSC ) , Bio Bloom ( GHSC) ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0

•Big bud 100 days from seed start flower 3/14 •Agent Orange 116 from clone Start flower 3/14 •I was going to do a lemon G 12/12 from seed but will be doing that in her own journal

Early lst

Day 48: Just finished my video from seed ordering to flowering. Mexican & CBD are in size 0.8L pot, while Green is in a 2L pot. Green was the first to shoot up so I put her in a larger pot but bent her stem under the soil which stunted her growth for a few days until her stem toughened up. CBD is now the tallest. Mexican was a runt to start with.