Likes
5
Share
Started some early training on this one.. loving the leaf colorations ✌️🏼
Likes
10
Share
@Fonzo412
Follow
This will be the start of week #2 of seedling stage. Had an issue 😢 with my blue dream plant I believe I’ve might of over watered . It looks bad hopefully it can recover. Yield may be stunted really lagging behind. Also I have another blue dream seed so I’m thinking of starting that one fresh so I can pot into the finale medium. I didn’t want to use the cup but didn’t have enough soil at the time 🤷‍♂️ The strawberry 🍓 banana 🍌 auto and the power plant fem seems to be doing good 👍 so far. All in all I’m happy 😊 with how things have been going throughout my grow . I’ll will be feeding my plants nutrients and dropping the lights 💡 for the start of Veg next week. Let’s goooo… 😎😏
Likes
11
Share
@Glizzy420
Follow
This plant just amazes me how many thricomes it has , i would definitely recommend this strain. I'm curious how it will smoke when it dries up! 😁 It smells very fruity and piney and you can see the crystals shining on it. Very happy with the results 🙂
Likes
11
Share
@PanGrower
Follow
It grows well, in principle, nothing more to add. I will add fertilizers later
Likes
19
Share
Going into week 9. Weirdo stopped dying back and pumped out another set of bracts. I guess she has time, maybe this week. I just dont know anymore.. Plant 2 has atleast another week, stacking buds well. Increase in mass is apparent now as the buds sway in the wind. Something must have happened for weirdo to die back like that. Not quite sure at this point as I haven't changed anything in a few weeks. Maybe a little pk boost. Looks like the symptoms I had when the plants suffered a drought but my system has been operational the entire time, as far as I know. I'll update if weirdo gets the axe this week, but I'd rather pull them together if I can.
Likes
5
Share
@AustinRon
Follow
TH 1Q2025 - Week 3 - Bolt 0 
(ON Haze X Original Haze) X Northern Lights #2 “Todd’s Haze” Objective - 8 Female Plants, Topped ONCE @ Flip, 12” when topped - Modified Sea of Green Seeds Wet: 1139PM, 28.2.2025 Germinated: 2.3.2025 Flip: 21.3.2025 Harvest: 77 Days, DATE: 6.6.2025 _________________________________________ __ Fri Mar 21, 2025 TH 1Q25 1:B:0:1 NOTES: - Tent was 75 & 71 %RH at 0900 - Humidifier pumping and ACI Removing and dropping temperature to lung room ambient. - Ah - Watering Follies. All the PCells have heft except #X, for which we’ll provide a modicum this AM. All others are benefiting from some dry. - CHEAP PPM Meters are CHEAP and WILDLY INACCURATE. - BluLab EC Pen: [ 1.1, mS/cm] - AmazonTenDollar: [ 396, ppm] - [ 0.792, mS/cm # 396/.500 - 28% Discrepancy. Cheap Pen will BURN YOUR PLANTS - You think you’re delivering 1.0 mS/cm, and in fact you’re delivering 1.3. - Thus - we’ve been over fertigating the seedlings, by almost 1/3 - Which explains the papery and uneven coloring over the smaller plants. - [x] THROW AWAY CHEAP AMAZON EC METER ;-} Fertigating Largest Plant that’s the driest, and ‘light refresh’ to the balance displaying heft. - [x] Remedial Fertigation pre-Up Plant EC: 1.2 Up Plant, Top, and Flip Day! Manifest: - 1 Gal Airpots, Assembled - 10 Gallons of Washed and Buffered Coco Coir - PCAL1660 ( 0.5 tsp, Coco in Bottom of Container) 2 gm/ gal PCAL 1660 - 32 ppm Phosphorous - [x] Obtain 4 Gallons Distilled Water - [x] Mix 2 Gallons, Apply @ Transplant & @ Second Watering - [x] KelPak: [ 8, ml] # EC After: TBD - [x] Rooted Leaf CalMag Fuel: [ 38.8, ml - [x] Rooted Leaf LushGreen: [ 19.4, ml] - [x] PCAL1660: [ 4, g] # BASE [32 ppm P/120 ppm Ca] - [x] EC: 1.2 Transplants (Per Pot) - PCAL1660: [ 0.5, tsp] # In NEW POT, UNDER TRANSPLANTED Pot - DynoMyco (Mycorrhiza): [ 0.25, tsp] - Beauveria Bassiana: [ 0.125, g] After TWO Waterings (as above) - We switch to Pre-Flower RLA Mix w/ CalMg & Lush Green ‘Boost’ We need a little more Phos - Note Patchy Pink on some upper Petioles . . . 8:6:4:5:4:2  1 Gallon Solution - Primer A&B: [ 4.6, ml] - CalMag Fuel: [ 3.4, ml] - Silica Skin: [ 2.3, ml] - Lush Green: [ 2.9, ml] - Root Anchor: [ 2.3, ml] - Peak Bloom: [ 1.1, ml] - Photosynthesis Plus: [ 6, ml] - Quillaja 60 Powder: [ 0.25, tsp] Relabeling Final Selections: 3, 4, 7, 6, 8, 9, 11, 12 Label: 3:1, 4:2, 7:3, 6:4, 8:5, 9:6, 11:7, 12:8 __ Sat Mar 22, 2025 TH 1Q25 2:B:0:2 EC: 1.2 Feed 1 Gal, 440 ml, plant - [x] Mix 1 Gallons, Apply @ Transplant & @ Second Watering - [x] KelPak: [ 8, ml] # EC After: TBD - [x] Rooted Leaf CalMag Fuel: [ 19.4, ml - [x] Rooted Leaf LushGreen: [ 9.7, ml] - [x] PCAL1660: [ 2, g] # BASE [16 ppm P/60 ppm Ca] - [x] EC: 1.2 __ Sun Mar 23, 2025 TH 1Q25 3:B:0:3 - [x] Sort Grow Room to std tidiness This is the NER w/ PCAL 1660 w/ P/K: 2.5, Needed for Root Steering. CalMag Fuel provides more calcium and Acidifies PCAL 1660 (OR that’s the theory, anyway) Here I’ve switched from Buildagrow’s CAL50K (Chelated Calcium Line, buildagrow.com) delivers 13 ppm/ml of Calcium, whereas Rooted Leaf’s CalMag Fuel contains 19 ppm/ml of Calcium. Buildagrow Chelates w/ EDTA and (the other one). Rooted Leaf CalMag Fuel are Calcium Fulvate and Magnesium Fulvate, +  EC: 1.2 __ Mon Mar 24, 2025 TH 1Q25 4:B:0:4 - Plants are displaying root stress, a tad of ‘the Claw.’ - We’re lowering the lights, permitting centers to dry back, a bit.   __ Tue Mar 25, 2025 TH 1Q25 5:B:0:5 NOTE: Observed Roots at Bottom of 1 GAL - #1 - A single root, apparent at PERIPHERY. EC: 1.2 # Until ESTABLISHED, then resume Ramp to 1.8 We want to start introducing Micronutes - [x] TM-7: [ 1, tsp, gal] # Place in Tea Filter, Close top, Drop in 1 Gal Mixing Container.
NOTE: We’re NOT Using Cytoplus (Kelp, TM-7) - We want NO ADD’L K, just micros. UNTIL ROOTS ARE APPARENT AT BOTTOM - [x] Prep 1 Gal, Distilled @ EC: [ 1.2, mS/cm] - [x] PCAL1660: [ 2, g] - [x] TM-7: [ 1/2, g] # µNutrients, No Potassium (We want to maintain P/K 2.5; root steering) - [x] Kelpak: [ 4, ml] - [x] CalMag Fuel: [ 19, ml] - [x] Lush Green: [ 9, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant] At Lights On - Apply __ Wed Mar 26, 2025 TH 1Q25 6:B:0:6 SOAK Root Riot Cubes - Mix up 1 L of Sol’n - [x] Prepare 8 Cubes: Todd’s Haze - [x] Prepare 2 Cubes: Lemon Jeffery - [x] Prepare 2 Spares: Mix Soak Solution (1 Liter) - [ ] BEFORE USE - [ ] Squeeze to Moist, NOT WET Condition - [x] PCAL1660: [ 0.5, g] # [2 g, g] application rate - [x] CalMag Fuel: [1, ml] - [x] KelPak: [ 1, ml] - [x] Photosynthesis Plus: [ 1.5, ml] Fertigation Wed - [x] With 1/2 tsp TM-7: Place in ‘tea bag’ filter; soak in .5L No EC Water. Use in fertigation Base
 UNTIL ROOTS ARE APPARENT AT BOTTOM - [x] Prep 1 Gal, Distilled @ EC: [ 1.2, mS/cm] - [x] PCAL1660: [ 2, g] - [x] TM-7: [ 1/2, g] # µNutrients, No Potassium (We want to maintain P/K 2.5; root steering) - [x] Kelpak: [ 4, ml] - [x] CalMag Fuel: [ 19, ml] - [x] Lush Green: [ 9, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant] __ Thu Mar 27, 2025 TH 1Q25 7:B:0:7 We’ve Roots at the Bottom of all 1 Gals. Switching to Root Bias, RLA Fertigation: 2 Gal, EC: 1.2-3 - [x] Primer A&B: [ 9.3, ml] - [x] CalMag Fuel: [ 7, ml] - [x] Silica Skin: [ 4.6, ml] - [x] Lush Green: [ 4.6, ml] - [x] Root Anchor: [ 4.6, ml] - [x] Peak Bloom: [ 2.3, ml] - [x] Photosynthesis Plus: [ 12, ml] - [x] TM-7 (µNutrients): [ 0.5, tsp] # Teabag Style Infusion 
Likes
103
Share
The stretch is real with this phenotype during the flower stage. The smell is something like guava but it also has the smell of like coffee beans. Everything seems to be going great I believe I solved the ph problem. Peyote is looking much better.
Likes
14
Share
@AndrewC
Follow
So this is the Tear Down week. The timing of it makes it so i will need to the harvest flag in a few days when I can weight and test the plants. I have included the Cleaning, and Cutting and some Root Porn. I will make the harvest post in about 4-5 days, when I can trim these plants. There is a lot of Plant here. I got way more than I was expecting. I don't have a scale that measure this amount of plant, without taking like 10 measurements and then adding them together. So I will just be posting the dry weight. I will post the wet weight as dry weight * 1.65. Autopots: Wow, what a great product. I have been blown away by how well and how easy it was to work with them. They really did solve the watering issues. Excellent product. If you are a beginner, start with Autopots. -= Lessons Learnt =- - Overdrive the air to your Autopots. In my control plant, I used a small rectangle air stone (instead of a standard air dome). This lead to root rot and some other issues, it also put significantly less air into the water. The root rot, give the material for the Brown Algae to grow. Using a huge Air-disc-Air-Stone would be an excellent combo to mix in with the air dome itself. Something like this: https://www.amazon.ca/Pawfly-Diffuser-Suction-Hydroponics-Aquarium/dp/B01MY3AQ33 at the bottom and the air-dome on top of it, will be what I do with my next experiment. - Air stone in the reservoir. I had two instances where algae grew into the res. An air stone would have helped. It would have also helped my control plant get less root rot. Given the amount that the air-domes and air sources got engulfed, having the water have more o2 in it would have only been beneficial. - Don't grow 6 plants in a 4x4. Since my control plant was about 1/8th the size of the others, I think I could have grown 5 in the shape of a 5 (on a 6 sided dice)⚄ This placement would give a much more spaced canopy for airflow and more importantly light. The sides of some of the plants were lighter green and produced larf due to lack of light penetration. - This tent was on 19-5 schedule. This worked out very well for this strain. After every lights on, they were in the praying position, so this strain was able to recover in that 5hrs off. If I had more seeds, I would run these again, and try 20-4. I think this strain could handle it. All for all, I think I'm going to 19-5 as my default timing. This kept up a solid DLI. - Staring at .9EC (really .7 EC cause my water here is .2 EC) Then bumping up at .1 a week, until 1.6EC worked out VERY well. I experimented on this crop all the way up to 1.9EC, which burnt the tips of this plant. I think if I did this strain again, I would do 1.6EC until 3-4 weeks left then crank it to 1.9. It did plump them up when I went to 1.9, however it left them looking rough. Bulk was added though. - Sticking to 6.0PH for all of veg, and 2 weeks into flower worked great. The plant had solid and consistent color and leaf shape . The plant's did get hurt, due to some issues (as noted on the weeks). I switched to 6.5 PH in the last 3-4 weeks and it helped them recover, and plump up noticeably. -VPD. The #1 thing I focused on was VPD. I keep it .9kpa range, as best as humanly possible. It was honestly, HUGELY noticeable compared to my other grows. I know truly understand the value of properly dialed in VPD. This is the one lesson that will stick with me forever. - Super-cropping: On the plants I give the chiropractic treatment too, had much thicker stems as much larger channel internally. I did this treatment to 4 of the 6, and the 4 that had it done has larger buds and recovered from defoliation faster. TLDR; VPD is king. Super-cropping is worth the time. Keeping PH and EC dialed in were all wins. Autopots kick ass.
Likes
13
Share
@Ksouth1
Follow
Last week went well. She is growing up at a good steady rate. Hope it continues like this for another week in veg and I think it will be a decent sized auto for being in a 3 gallon container. I started lst training and because of how fast it grew,.it started to split the plant in the middle at the base of the branches. To avoid it splitting and causing damage, I did some supercropping to help even out the canopy some. That's the main goal of the week is evening up the branches.
Likes
Comments
Share
Likes
19
Share
DREAM SHERBERT AUTO / KANNABIA Week #13 OVERALL WEEK #8 FLOWER This week she's showing all the attributes she's about done from the color in her leaves to her buds and trichomes. She's in flush mode this week to prepare for harvest. Stay Growing!! Thank you for stopping by and taking a look it's much appreciated!! Thank you KANNABIA!! KANNABIA.COM SHERBERT DREAM AUTO
Likes
17
Share
@MrGoonai
Follow
10/17/24 Short facts: - Continued with LST - Watered: 1 x 1.2L, 1 x 0.3L, 1 x 2L - VPD @ 0.9 — raised by 0.1 - Light @ 50% ~500 to 560 PPFD - Removed 2-3 leaves --------------------------------------------------------------------------------- As promised last week, i made a video and explained the progress so far, and did show you the plant. Not much to report. I continued LST, though I’ve stopped for a few days now since the branches are well spread out, and that should be enough for the time being. The Grease Monkey is getting much thirstier, so I had to water her more than the other two plants. This correlates with her growth, which is exploding right now. She was already in preflower, but officially switched to flower on this day, so next week will be her first real week of flowering. I’m curious to see how much she’s going to stretch. Great plant! She’s currently my favorite in the grow tent.
Likes
Comments
Share
Flower tent is ac infinity 4x8 tent. With two spider farmer sf-4000. This tent has the exhale 360 co2 grow bag. The nutrients are not what each plant receives. Each stage gets its appropriate nutrients. I will be going back and trying to name each plant in the 2-7 feeding
Likes
36
Share
Hey everyone . This week she was left in her 1 L pot, and will not be in the 11 L pot until next week :-). She was topped again and accepted it super 😃. By the time she is repotted next week and given Green House Powder Feeding for the first time, she will have received a small portion of Canna Vega :-). Otherwise it grows very quickly and vigorously, and they look beautiful 😍👌. I wish you all a lot of fun with the new update, stay healthy and let it grow 🙏🏻👍 You can buy this Strain at : https://sweetseeds.es/de/sweet-skunk-f1-fast-version/ Type: Sweet Skunk F1 Fast Version ☝️🏼 Genetics: Sweet Skunk Auto (SWS34) X Early Skunk 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .
Processing
Likes
13
Share
@Esiking
Follow
hi guys.my BIG is geting flush with pure water.after that i will use flawlessfinish twice and then harvest.its 4 months old plant. just guess the yield friends. thank you.
Processing
Likes
9
Share
This week is good buds site are forming out more with transiting plant n flowering one is get bigger n scent is starting to be more noticeable without touch
Likes
21
Share
@NG420
Follow
Fattys are growing and seem to be thirstier.Used foliar spray to help the leaves and also started tucking. When the plant was topped pistils were seen for first time.