Flushing😜nice buds💞

What's up Growmies 🤟🏽 Welcome back to another week #10 overall and #3 flowering. She is doing well and continue to stack on buds, I continue to fed her the same schedule and dosage of nutes, it seems to be working well. Everything seems to be going well so far nothing new to report, until next week my friends Happy growing and may the grow goddesses bless you all with a bountiful harvest!

Had a cold, slow growing week this week. Night temps dropped down pretty low a few nights before I noticed, had a cold snap and I recently took my heating vent out of the tent, so I rerouted one of my AC exhausts trough this tent to heat it up again. I also had a bit to much nitrogen in my water mixture so this also slowed them down a bit, I diluted the nutrients in half but removing half of the water and adding strait water. There coming around now a few days later. Gonna be moving them to the big 4’x8’ tent soon(week or so prob till the tent is empty) with the RDWC 5gal bucket system and 1000w HPS for flowering. Gonna let them grow up a bit still before be start there LST, don’t wanna stress them yet after last week and there still staying low and bushy, not quite long enough shouts to pull over yet. Well that’s it for this week, cheers💨 #trusttheplant🌱

It’s working, she’s stretching and spacing out between those nodes! Just needed to raise those lights more.

the plants are not too leafy but still need a bit defoliation around week 3 and 6 of flower, depending on how u grow this ofcourse next time i would bend them more in the net. anyway the buds are rockhard even at the bottom where there was no light.

Still vegging looking like big bad ass bitches love it went organic a wee more water less nutrients was also thinking ov starting to ph my water m still grow in soil or well bio bizz all mix am loyal to the soil 😆

the headbuds of the rainbow triangle were already harvested with the other plants (Forbidden Nectar and Sunset Kush Pop Clone), as one of the thick headbuds had already a little bit budrod We left the rest of the plant for another week. During this week, the lower buds really put on weight again. The head buds are already dried and will be cured. The rest has now been hung up to dry.

Han estirado mucho hacia arriba mostrando sus genes sativa. Sin problemas

Hey fellow green thumbs! 🌿💚 The day has finally come—our Auto Northern Dragon Fuel from Super Sativa Seed Club has been harvested! After an exciting journey, we’re thrilled to share the details of this incredible plant’s final stage. Let’s dive into the harvest report! 🌟 Harvest Details: Day 75: Harvest Day • Harvest Date: Day 75 • Harvest Method: Our beautiful Auto Northern Dragon Fuel was harvested yesterday. After weeks of careful nurturing, the time was right to bring in this amazing plant. 🌿🌼 • Preparation: Before hanging, we meticulously cleaned the plant, removing all leaves without trichomes to ensure a smooth drying process and to enhance the quality of the final product. 🌿✂️ Current Drying Process: • Method: The entire plant is now hanging upside down to dry. This method helps maintain moisture levels within the buds, allowing for a slower and more even drying process. 🌿🔄 • Environment: • Temperature: 18-22°C (65-72°F) • Humidity: 50-60% Maintaining these conditions is crucial for achieving a perfect dry and preserving the plant’s aromatic and flavorful profile. 🌡️💧 🌟 Plant and Bud Characteristics: Auto Northern Dragon Fuel: • Bud Structure: Dense and sticky, with an impressive trichome coverage. The buds are beautifully formed, showcasing the robust genetics of this strain. • Aroma: Even in the drying phase, the rich and potent aroma is unmistakable. Expect a delightful scent that hints at the powerful experience to come. • Trichomes: A thick layer of trichomes covers the buds, promising a potent final product with a great flavor profile. 🌿✨ 🌟 Care Tips: • Drying Process: Patience is key. Allowing the plant to dry slowly will enhance the final quality, preserving both flavor and potency. Ensure good airflow around the hanging plant to prevent mold and mildew. 🌬️💧 • Trimming: Once the drying process is complete (typically 10-14 days), it will be time to trim the buds. This is where we’ll shape the final product and get it ready for curing. ✂️🌿 • Curing: After trimming, curing the buds in jars for at least 2-4 weeks will further enhance the flavor and smoothness. This final step is essential for achieving the best possible smoking experience. 🍁 🌟 Genetics Spotlight: Auto Northern Dragon Fuel: • Characteristics: Known for its robust structure and dense buds, this strain has shown remarkable resilience and impressive bud development throughout the grow. The final product promises to be potent and flavorful, thanks to the thick trichome coverage and rich aroma. • Harvest Expectations: High-quality buds with a strong aroma and potent effects. The slow drying process will ensure the best possible preservation of cannabinoids and terpenes. 🌍🌿 Fun Fact: Did you know? 🌿✨ Drying the entire plant slowly helps retain more terpenes, which are responsible for the plant’s aroma and flavor. This method also helps preserve the potency and quality of the buds, resulting in a smoother and more enjoyable experience. For all the in-depth action and detailed explanations, head over to my YouTube channel! 🎥✨ I’m sharing all the tips, tricks, and step-by-step guides to help you get the best results from your grow. This week’s harvest has been particularly exciting, and there’s so much more to explore and learn together! 👉 Join me on YouTube Link in my profile 👈 🌟 Conclusion: Harvesting Auto Northern Dragon Fuel at Day 75 has been a rewarding experience. With the plant now drying, we’re eagerly awaiting the final product. Stay tuned for updates on the drying, trimming, and curing process, and get ready for a high-quality harvest! Happy growing, and see you next time! 🌿💚✨ #SuperSativaSeedClub #HarvestReport #NorthernDragonFuel #PlantMagic #GardeningJoy #NatureLovers #PlantPower #InspireGrow #YouTubeJourney

Week 13 (10-10 to 16-10) 10-10 Temperature: 27.4 degrees (lights on) 20.4 degrees (lights off) Humidity: 82% (highest) 51% (lowest) Watering: 1250 ml. PH 6.5 EC: 0.6 (without Hybrids & PK+) The strength of the light is set to 90%, distance is at 29.5 cm / 37 cm. LUX: 22.300 / 27.300 11-10 Temperature: 26.6 degrees (lights on) 20.4 degrees (lights off) Humidity: 74% (highest) 52% (lowest) Watering: 700 ml. PH 6.5 EC: 0.6 (without Hybrids & PK+) 12-10 Temperature: 26.8 degrees (lights on) 19.9 degrees (lights off) Humidity: 76% (highest) 60% (lowest) Watering: 400 ml. PH 6.5 EC: 0.6 (without Hybrids & PK+) 13-10 Temperature: 26.8 degrees (lights on) 20.9 degrees (lights off) Humidity: 85% (highest) 60% (lowest) Watering: 1000 ml. PH 6.4 EC: 0.6 (without Hybrids & PK+) 14-10 Temperature: 24.9 degrees (lights on) 19.5 degrees (lights off) Humidity: 74% (highest) 49% (lowest) Watering: None. 15-10 Temperature: 23.8 degrees (lights on) 18.4 degrees (lights off) Humidity: 64% (highest) 49% (lowest) Watering: 1200 ml. PH 6.4 EC: 0.6 (without Hybrids & PK+) 16-10 Temperature: 23.5 degrees (lights on) 19.4 degrees (lights off) Humidity: 54% (highest) 50% (lowest) Watering: 1000 ml. PH 6.4 EC: 0.6 (without Hybrids & PK+)

Hi everyone 🤗. It was rinsed slightly 3 days ago and now only gets water with 0.4 EC. From tomorrow on she won't get any Canna Boost anymore, because I'm not the fan of giving it to the end :-) It always looks more beautiful and more beautiful 😍. You can see how she removes the last nutrients from the leaves and slowly comes to an end 😇. From next week the trichome pictures will also be added 👍. I can't wait to try them 🤣 I wish you all a nice week, stay healthy 🙏🏻 and let it grow 🌱 You can buy this Strain at : https://sweetseeds.es/ Sweet Seeds Cup 🏆 Type: San Fernando Lemon Kush ☝️🏼 Genetics: OG Kush x Kosher Kush 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Earth: Canna Bio ☝️🏼 Fertilizer: Canna Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 - 6.3 💦💧

Plant grew well outside if a little rot issue. Was operator error. She grew well under the Mars Hydro FC4800, with the Athena blended line nutrition. A berry sour smell with lots of frost. She should be a good 4 to 5 ounces once done. I did use mire then Athena recommend in flowering. I will be back with smoke report in a few months. Thank you Mars Hydro, Athena, and Weed Seed Express. 🤜🤛🌱❄️🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Only Compost tea mix Worm,cow,fish, rabbit, chicken, two pieces deployed late

First time running hydroponics. And I’ll say it’s pretty easy although running into problems with ph rising cause of not using ro water so it started getting a potassium deficiency. I think I’m prepared for next run.

Day 36 😋 - Defoliationed 20% (Start from below) 💪ROUGH FEED SCHEDULE💪 VEG Week 1 (day 1-6) : Just 6.5Ph balance H2O Week 2 (day 9) : ( 1ml Micro , 1ml Grow , 1ml Bloom , 2ml B-52 , 2ml Voodoo Juice) / 1 lite H2O Week 2 (day 14) : ( 2ml Micro , 1ml Grow , 1ml Bloom , 2ml B-52 , 2ml Voodoo Juice) / 1 lite H2O Week 3 (day 19) : ( 4ml Micro , 4ml Grow , 4ml Bloom , 2ml B-52 ) / 1 lite H2O Week 4 (day 23) : ( 4ml Micro , 4ml Grow , 4ml Bloom , 2ml B-52 ) / 1 lite H2O FLO Week 5 (day 32) : ( 4ml Micro , 4ml Grow , 4ml Bloom , 2ml Voodoo , 2ml Bud Candy , 2ml Sensizym)/ 1 lite H2O Week 5 (day 38) : ( 4ml Micro , 4ml Grow , 4ml Bloom , 2ml Voodoo , 2ml Bud Candy , 2ml Big bud , 2ml Sensizym)/ 1 lite H2O (👉one time per 5-7days👈) 😏EQUIPMENT USED😎 - QB288 v2 Powered by Samsung LM301B LED (240watt) 💪 - Mars Hydro grow tent (1mx1mx1.8m) - 6" Duch fan HF-150P - The Aroma diffuser I'm a beginer grower 👽 Please LIKE 👍 & FOLLOW ME 🙌

100% success on the germination, with the 2 out of 2 seeds germinated, let's grow!! 👨‍🌾💯💚

I finally broke a pound with a single autoflower! Couldn’t have done it without AGLEX cob led’s, Remo Nutrients, and coco coir. They’ve changed my game completely! This grow started off as a pretty standard grow. I did absolutely no training until the veg period was winding down, and pre-flower was beginning. As the SCROG net went in, a little later than planned, numb fingers due to cervical spinal issues, and a poorly time muscle spasm, I snapped the main stalk...disaster right? Apparently not! They’re tough plants! Within a day or so she was perked up and sending up new colas from all the growth nodes now exposed to the 2000w AGLEX cob led’s. These lights have transformed my grow process, and increased my yields by over 300% compared to my old led’s, and only draws 408w from the wall. 1.23g/w is quite satisfactory I didn’t have much tucking to do this grow after the original SCROG. Due to the fact I was a little late getting the SCROG net in place, she didn’t have too much stretch left in her, she certainly fattened up quite nicely though, almost too much so in places. The front left side of the SCROG net got awfully crowded with huge buds packed tightly together. Lesson learned...keep the branches spaced apart slightly further, and maybe allow slightly more vertical growth of the colas to allow slightly better light, and air flow penetration. My issue is I only have 6 foot ceilings in my tents. The ceiling in my grow room is only a little over 6’2”. I managed, through SCROG techniques, without topping or fimming, to keep the top of my canopy 24” from the floor. This allows plenty of space above for the AGLEX cob, and exhaust fan. After last feeding I flushed with just Ph’ed water for 5 days, then gave the plant 48 hours of darkness, to rid itself of chlorophyll before harvesting on November 4th and hanging in a drying rack. It’s still curing in jars but after trying a few samples, it’s an awesome strain, and hits hard. It’s not as hard as it sounds to fill a 4x4 tent with a single autoflower, and still pull 18 ounces (504g) out of that tent. With simple SCROG technique, defoliation, quality grow medium you can achieve the same results. Of course you’ll need an AGLEX 2000w cob, but for an 18 ounce return on a $300CAD light, in 3 months, it’s a no brainer folks! You won’t find a better light under $300 Canadian. You’ll also need a quality nutrient line, and it’s hard to go wrong with the Remo Supercharged Kit. The proof of those 2 products quality are in my harvest. I hope this has helped improve your own grows somehow :) Head over to YouTube and visit my channel, just search for Scrog Freak, or click the link below. Drop a like and subscribe, more videos and logs to come! Recently entered a Gelato OG Grow Off and will be posting updates and instructional videos there. Check it out! Thanks and good growing! ScrogFreak https://www.youtube.com/channel/UCDFY6EjqIMqv2peq1d1eM1Q